Walker Edison Furniture WQ44CFD User Manual

Item #: WQ44CFD

Assembly Instructions

For our most current instructions, to request missing, lost or broken parts, or for any other Customer

Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.

Revised 02/2011

General Assembly Guidelines

I. Ensure that all parts and hardware are available before beginning assembly.

II. Follow each step carefully to ensure the proper assembly of this product.

III. Two people are recommended for ease in the assembly of this product.

IV. The main types of hardware used to assemble this product are: wood dowels,
cam bolts and locks, bolts and screws.

V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.

In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.

VI. A Phillips head screwdriver is required for the assembly of this product.

VII. Power tools should not be used to assemble this product.

P.2

Parts List

Hardware List

Long bolt

Door stopper plate

Door hinge

Door hinge

Short bolts

Screw cam bolts (B) into stand top (1).

Screw cam bolts (B) into panel (2). Insert dowels (A) into slat (17).