Walker Bay Genesis, Odyssey Owenrs Safety Manual

OWNER’S SAFETY MANUAL
For Customer Service or Technical Support visit www.walkerbay.com
DECLARATION OF CONFORMITY
International standards to which conformity is declared: Recreational Craft Directive, RCD: 94/25/EC, Module A International Organization for Standardization, ISO: 6185-1/2/3 American Boat and Yacht Council, ABYC: H-28 National Marine Manufacturers Association, NMMA: H-28
CERTIFYING BODIES
Europe United States of America
MANUFACTURER
TYPE OF EQUIPMENT • TYPE ‘D’
Inflatable Boat
HULL IDENTIFICATION NUMBER
HIN / CIN (Found on boat transom): US-EWV___________________
IMPORTER
This Owner’s Safety Manual and all its components are copyrighted materials of Walker Bay®. All rights reserved.
IMCI Langstr. 89 B-4731 Eynatten, Belgium Tel: 32 87 30 65 30 Fax: 32 87 30 65 36 info@imci.org
ICNN 40 Avenue du Lazaret 17 000 La Rochelle, France Tel: 33 (0) 5 46 28 32 24 Fax: 33 (0) 5 46 34 04 66 contact@icnn.fr
National Marine Manufacturers Assn. Suite 5100-200 E. Randolph Dr. Chicago, IL 60601-6528, USA Tel: 1 (312) 946-6214 Fax: 1 (312) 946-0388
Walker Bay Boats, LLC 3555 Bay Street Union Gap, WA 98903-1887 www.walkerbay.com
Customer Service email: info@walkerbay.com
TABLE OF CONTENTS
INTRODUCTION 3 REGISTRATION AN D REGULATIONS 4 MANUFACTURER’S STATEMENT OF ORIGIN (MSO) WARRANTY & WARR ANTY REGISTRATION SPECIFICATIONS AND MAXIMUM CAPACITIES 5 DESIGN CATEGORI ES TYPICAL FEATURE S AND DECK PLAN MATERIALS 6 OPERATOR INSTRU CTIONS 7 LOADING & BOARD ING WEATHER & HAZAR DS NAVIGATION CLEANING & MAIN TENANCE 8 ENVIRONMENT STORAGE 9 ANCHORING - MOO RING BEACHING DAVITS CRADLES & CHOCKS MOTORING 10 MOTOR SELECTION MOTOR TRIM MOTOR HEIGHT ROWING OR PADDL ING SAFETY EQUIPMEN T 11 CHECKLIST BEFOR E OPERATING EMERGENCY PROCE DURES ACCIDENT REPORT ING (USA) RENDERING ASSIS TANCE (USA) TOWING BEHIND A BOAT 12 TRANSPORTING BY ROAD INFLATION 13 INFLATION SEQUE NCE FLOOR INFLATION (AIR FLOOR MODELS) CHANGES IN TEMP ERATURE, PRESSURE OR ALTITUDE OPERATION OF VA LVES INSTALLING SEAT S REPAIRS 14 RIGID HULL REPA IRS FINDING SMALL L EAKS IN AIR CHAMBERS TUBE - SMALL TE ARS, CUTS, PUNCTURES LARGE REPAIRS T O SKIN - SEAMS - BULKHEADS - TRANSOM REPLACEMENT PAR TS TROUBLE-SHOOTIN G 15
ATTACHMENTS
MANUFACTURER’S STATEMENT OF ORIGIN (MSO) WARRANTY WARRANTY REGIST RATION FORM SPECIFICATIONS & MAXIMUM CAPACITIES RECOMMENDED SEA TING ARRANGEMENTS
3
INTRODUCTION
This manual has been compiled to help you operate your craft with safety and pleasure. It contains details of the craft; the
equipment supplied or fitted, its systems and information on their operation. Please read it carefully and familiarize yourself with
the craft before using it.
This Owner’s Safety Manual is not a course on boating safety or seamanship. If this is your first craft or inflatable, or if you are
changing to a type of craft you are not familiar with, for your own comfort and safety, please ensure that you obtain handling
and operating experience before “assuming command” of the craft. Your dealer or national boating/sailing federation or yacht
club will be pleased to advise you of local sea schools or competent instructors.
Ensure that the anticipated wind and sea conditions will correspond to the design category of your craft (see DESIGN
CATEGORIES) and that you and your crew are able to handle the craft in these conditions. Even when your boat is categorized
for them, the sea and wind conditions corresponding to the design categories A, B, and C range from severe storm conditions
for category A, to strong conditions for the top of category C, open to the hazards of a freak wave or gust. These are therefore
dangerous conditions, where only a competent, fit and trained crew using a well maintained craft can satisfactorily operate.
This Owner’s Safety Manual is not a detailed maintenance or trouble-shooting guide. In case of difficulty, contact Walker Bay
or its national representative.
Always use trained and competent people for maintenance, fixing or modifications. Modifications that may affect the safety of
the craft must be assessed, executed and documented by competent people. Walker Bay or its representative cannot be held
responsible for modifications that Walker Bay® has not approved. Modifications or attachment of items to the hull or tube may
affect your warranty (see WALKER BAY® INFLATABLE BOAT LIMITED WARRANTY ).
In some countries a driving license, boating license, certification, or authorization are required, or specific regulations are in
force for operating a marine craft. Check with your local boating safety office.
Always maintain your craft properly and make allowances for the deterioration that will occur over time and as a result of heavy
use or misuse of the craft. Any craft, no matter how strong it may be, can be severely damaged if not used properly. This is not
compa
tible with safe boating (see OPERATOR INSTRUCTIONS). Always adjust the speed and direction of the craft to sea
conditions.
The craft should have onboard the appropriate safety equipment (see SAFETY EQUIPMENT) according to the type of craft,
weather conditions etc. This equipment is mandatory in some countries. The crew should be familiar with the use of all safety
equipment and emergency maneuvering (see SAFETY EQUIPMENT & EMERGENCY PROCEDURES). Contact your local
boating/sailing organization for information, lessons or drill sessions. All persons should wear a suitable Coast Guard approved
buoyancy aid (life jacket/personal floatation device). Note that in some countries, it is a legal requirement to wear a buoyancy
aid that complies with their national regulations at all times.
PLEASE KEEP THIS OWNER’S MANUAL AND YOUR MSO IN A SECURE PLACE AND HAND IT OVER TO THE NEW
OWNER WHEN YOU SELL THE CRAFT.
REGISTRATION AND REGULATIONS
REGISTER YOUR BOAT (USING YOUR MANUFACTURERS STATEMENT OF ORIGIN OR MSO, AND YOUR HULL IDENTIFICATION NUMBER OR HIN) WITH YOUR STATE OR PROVINCE IF REQUIRED. REGULATIONS VARY BY JURISDICTION SO CONTACT YOUR LOCAL REGISTRATION OFFICE DIRECTLY.
The operator is responsible for knowledge of federal, state or local regulations concerning operation requirements. For example: safety equipment, discharge of oil, speed, noise, wake etc.
MANUFACTURERS STATEMENT OF ORIGIN (MSO)
Your MSO should be provided to you by your dealer. Keep your MSO in a safe place. You will need it to register your boat with your state or province. Hand the MSO to the new owner if you sell the boat. If your MSO is lost or stolen contact Walker Bay at info@walkerbay.com for a replacement. Note: There is an administrative fee for issuing replacement MSO’s.
WARRANTY AND WARRANTY REGISTRATION
For information on the Limited Warranty and Extended Warranty coverage see the WALKER BAY® INFLATABLE BOAT LIMITED WARRANTY included with this manual or go to www.walkerbay.com.
IMPORTANT
We strongly recommend that you register your warranty to extended your warranty coverage as defined in the WALKER BAY® INFLATABLE BOAT LIMITED WARRANTY.
Ask your dealer to complete your Warranty Registration Form and submit it to Walker Bay.
OR
Submit your warranty registration yourself by completing the Warranty Registration/Boat Owner Registration Form online at: www.walkerbay.com/inflatables/registration/
Registering your warranty provides Walker Bay with your contact information in case of warranty or service notifications. The Federal Safety Act of 1971 provides for defect notification to the first purchaser. Failure to register your purchase with Walker Bay constitutes waiver of the right to defect notification.
Registering your warranty will speed up your claim and reduce the paperwork needed to process your claim should you require warranty service in the future.
FAQ? Where do I find the HIN/CIN on the boat?
?
Answer: The Hull Identification Number or Craft Identification Number can be found on the starboard/right outside of the transom of your boat.
FAQ? What model year is my boat?
?
Answer: The model year is the last two digits of your HIN/CIN which can be found on the starboard/right outside of the transom of your boat.
4
!
WARNING
5
TYPICAL FEATURES AND DECK PLAN
The features listed in this diagram are general features common to most inflatable boats. They are intended to help find or refer to commone features. The precise arrangement and type of features found on your model of boat may may differ.
A
B
C
D
E
F
G
H
I
K
J
L
M
N
O
P
Q
R
S
T
U
J
Do not exceed maximum recommended number of persons. Regardless of number of persons on board, total weight of persons and equipment must not exceed maximum recom-
mended load. Always use seat(s)/seating spaces provided. Do not exceed maximum recommended load. Always load craft carefully and distribute loads appropriately to maintain design trim (approximately level). Avoid standing or
placing heavy weights high up.
DESIGN CATEGORIES
A - Ocean - Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4 meters and above, and vessels largely self-sufficient;
B - Offshore - Designed for offshore voyages where conditions up to, and including, wind force 8 and significant wave heights up to, and including, 4 meters may be experienced;
C - Inshore - Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions up to, and including, wind force 6 and significant wave heights up to, and including, 2 meters may be experienced;
D - Sheltered waters - Designed for voyages on small lakes, rivers, and canals where conditions up to, and including, wind force 4 and significant wave heights up to, and including, 0.5 meters may be experienced.
SPECIFICATIONS AND MAXIMUM CAPACITIES
For specifications and maximum capacities refer to the SPECIFICATIONS AND MAXIMUM CAPACITIES sheet for your boat model included with this manual or go to www.walkerbay.com to view or download it.
A - Hull B - Floor
C - Transom D - Rub Rail E - Drain Plug F - Motor Mount G - Oar H - Oarlock I - Hauling Handle J - Davit Lifting Points K - Capacity Label L - Hull ID (CIN) Number
M - Operator’s Warning Label* N - Valve (Typical Placement) O - Keel Valve (Roll-up models only) P - Lifting and Re-boarding Handles (Not for Tying or Davits) Q - Seat with Cup Holders and Compartment (on Select Models) R - Trim Tabs with Integrated Wheels in The Keel (on Select Models) S - Bow Seat with Storage Compartment (on Select Models) T - Bow Eye for Towing (on Select Models) U - D-rings for Towing (on Select Models)
*Replace warning labels if they become damaged, faded or illegible. For reordering and replacement of labels contact Walker Bay® Customer Service.
Loading...
+ 11 hidden pages