Walker WQ44CMPTB User Manual

Item #: WQ44CMP

Assembly Instructions

For our most current instructions, to request missing, lost or broken parts, or for any other Customer

Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.

Revised 09/2010

General Assembly Guidelines

I. Ensure that all parts and hardware are available before beginning assembly.

II. Follow each step carefully to ensure the proper assembly of this product.

III. Two people are recommended for ease in the assembly of this product.

IV. The four main types of hardware used to assemble this product are: wood dowels,
cam bolts and locks, bolts and screws.

V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.

In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.

VI. A Phillips head screwdriver is required for the assembly of this product.

VII. Power tools should not be used to assemble this product.

P.2

Parts List

Hardware List

Wood dowel

Cam bolt

Large cam lock

Small cam lock

Large bolt

Small bolt

Handle

Large screw

Small screw

Plastic wedge

Wrench

Glue tube

Sticker

The hardware quantities listed above are required for proper assembly.

Some extra hardware may also have been included.

Screw cam bolts (B) into stand top (1).

Insert dowels (A) into shelves (9), stand base (2) and drawer divider (4).