Walker WPS32DVD, WPS5014LED Operating Instructions Manual

COLOUR TELEVISION WITH REMOTE CONTROL

OPERATING INSTRUCTIONS

WPS32DVD

BE WALKER WISE...logon to www.walker.ie

APPROVED

English - 1 -

Safety Precautions

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

The lightning ash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric shock of
persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Please read these instructions fully

before installing or operating.

Preparation

Place the device on a solid even surface. For
ventilation, leave a free space of at least 10 cm
all around the set. To prevent any fault and unsafe
situations, do not place any objects on top of
the set. Use this device in moderate climates.
Operation temperature and operation humidity:
5ºC up to 45ºC, 85% rel. humidity max. (not blocking
ventilation openings).

Intended Use

This device is used to receive and display TV
programmmes , as well as to play CDs and DVDs (see
“This device compatible disc types”).The different
connection options make an additional expansion of
the reception and display sources possible (various
external devices). This device is only suitable for the
operation in dry interiors. This appliance is intended
solely for private domestic use and may not be used
for industrial and commercial purposes. We exclude
liability in principle, if the device is not used as
intended, or unauthorized modications have been
made. To operate your LED TV in extreme ambient
conditions may cause the damage of the device.

Contents

Safety Precautions ................................................. 1

Accessories included .............................................. 3

Environmental Information ..................................... 3

TV - Features ......................................................... 3

Viewing the TV ...................................................... 3

DVD - Control buttons ............................................ 4

TV Control button & Operation ............................... 4

Remote control button functions - Normal remote

(TV) ......................................................................... 5

Remote control button functions - Normal remote

(DVD) ...................................................................... 6

Using a Conditional Access Module ....................... 8

Standby Notications .............................................. 8

Installing the Batteries to the Remote..................... 9

Connect Power & Antenna/Cable/Satellite ............. 9

Switching On/Off ..................................................... 9

First Time Installation.............................................. 9

Media Playback via USB Input ..............................11

Changing Image Size: Picture Formats .................11

Using the Channel List ......................................... 12

Quick Menu .......................................................... 12

Menu Features and Functions .............................. 13

Menu Features and Functions .............................. 14

Menu Features and Functions .............................. 15

Menu Features and Functions ............................. 16

Electronic Programme Guide (EPG) .................... 17

Recording a Programme ...................................... 17

Timeshift Recording ............................................. 18

Instant Recording ................................................. 18

Watching Recorded Programmes ....................... 18

Connectivity Functions ......................................... 18

DVD MODE .......................................................... 23

How to watch a DVD ............................................ 23

Notes on DVD Playback ................................... 24

DVD Mode Conguration...................................... 24

Teletext ................................................................. 27

Digital Teletext (for UK only) ............................. 27

Using SatcoDX Feature ........................................ 27

Software Upgrade................................................. 27

Troubleshooting & Tips ......................................... 28

PC Typical Display Modes ................................... 29

Specications .............................................................30

Licence Notications............................................. 30

Supported File Formats for USB Media Browser . 31

Supported DVI Resolutions .................................. 32

DVD Mode Supported le formats ........................ 33

Compatible disc types .......................................... 33

Appendix: Nero MediaHome Installation .............. 34

Important Instruction ............................................. 37

English - 2 -

WARNING: Never let people (including

children) with physical, sensory or mental
abilities or lack of experience and / or knowledge
unsupervised use electrical device!

Children may not recognize dangers right!
The swallowing of batteries can be fatal. Keep
batteries always out of reach of small children.
If a battery is swallowed, immediately seek

medical attention. Keep the packaging lms out

of reach of children. Risk of suffocation.

Power source

• The TV should be operated only from a 220-240 V
AC, 50 Hz outlet.

•

Warning: Do not leave your TV in standby or

operating mode when you leave your house.

Positioning the TV

• For ventilation, please leave a clear space of at least
10cm all around the TV.

• Do not block the ventilation openings.

• Do not place the TV on sloping or unstable surfaces,

the TV may tip over.

• To prevent damage to the TV, do not place any
objects on top of the TV.

• Only use the TV in moderate climates.

Power cord and plug

• The power cord plug should be easily accessible.
In case of storms and lightning, when going on
holiday, or when the TV is not used for a long period
of time disconnect the power cord from the mains
power socket.

• The mains plug is used to disconnect TV set from
the mains and therefore it must remain readily
operable.

• Do not place the TV, furniture, etc. on the power
cord or pinch the cord.

• Handle the power cord by the plug, do not unplug
the TV by pulling the power cord.

• Never touch the power cord/plug with wet hands as
this could cause a short circuit or electric shock.

• Never make a knot in the power cord or tie it with
other cords.

• Power cords should be placed in such a way that
they are not likely to be stepped on or driven over.

• A damaged power cord/plug can cause re or give you
an electric shock. When damaged it must be replaced,
this should only be done by qualied personnel.

Moisture and Water

• Do not use this TV in a humid or damp place (avoid
bathrooms, the sink in the kitchen, and near the
washing machine).

• Do not expose this TV to rain or water, as this may

be dangerous.

• Do not place objects lled with liquids, such as

ower vases, on top of the TV. Avoid from dripping
or splashing.

• If any solid object or liquid falls into the cabinet,
unplug the TV and have it checked by qualied
personnel before operating it any further.

Ventilation

• The slots and openings on the TV set are intended
for ventilation and to ensure reliable operation.

• To prevent overheating, these openings must not be
blocked or covered in anyway.

Heat sources and Flames

• Do not expose the TV to direct sunlight
or other heat sources.

• The TV should not be placed near to
open ames and sources of intense
heat such as an electric heater.

• Ensure that no open ame sources, such as lighted
candles, are placed on top of the TV.

Headphone Volume

• Excessive sound pressure from
earphones and headphones can cause
hearing loss, please take care.

Wall Mounting (optional)

• To prevent injury, this TV must be securely attached
to the wall in accordance with the installation
instructions (if the option is available).

LCD Screen

• Occasionally, a few non-active pixels may appear
on the screen as a xed blue, green or red point.
Please note that this does not affect the performance
of your product.

• Take care not to scratch the screen with ngernails
or other hard objects.

Cleaning

• Before cleaning, unplug the TV from the wall socket.

• Do not use liquid or aerosol cleaners. Only use a
soft, dry cloth.

Servicing

• Warning: Risk of exposure to radiation from
class 1/class 3b visible and invisible laser beams.
Do not open the TV and stare directly into beam.

English - 3 -

TV - Features

• Remote controlled colour LED TV.

• Fully integrated digital/cable/satellite TV

(DVB-T/C/S-S2).

• HDMI connectors for digital video and audio.

This connection is also designed to accept high
definition signals.

• USB input.

• Programme recording.

• Programme timeshifting.

• 10000 programmes.

• OSD menu system.

• Scart socket for external devices (such as video, video

games, audio set, etc.).

• Stereo sound system.

• Teletext, fastext, TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual tuning.

• Automatic power down after up to six hours.

• Sleep timer.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98, ME, 2000, XP, Vista,

Windows 7.

• Game Mode (optional).

• Picture off function.

• Ethernet (LAN) for Internet connectivity (Optional)

and service.

• DLNA.

Viewing the TV

• Warning: Risk of electric shock, do not attempt
to repair, service or modify this TV yourself. Contact
the manufacturer, their approved service agent.

Environmental Information

This television is designed to consume less energy
to save environment. You not only help to save the
environment but also you can save money by reducing
electricity bills thanks to the energy efciency feauture
of this TV. To reduce energy consumption, you should
take the following steps:

You can use Power Save Mode setting, located in the
Picture Settings menu. If you set Power Save Mode
as Eco, the TV will switch to energy-saving mode
and luminance level of TV set will be decreased to
optimum level. Note that some picture settings will be
unavailable to be changed when the TV is in Power
Save Mode.

If Picture Off is selected, “Screen will be off in 15
seconds.” message will be displayed on the screen.
Select PROCEED and press OK to continue. The
screen will be off in 15 seconds. If you disable Power
Save Mode, Picture mode will be automatically set
to Dynamic.

When the TV is not in use, please switch off or
disconnect the TV from the mains plug. This will also
reduce energy consumption.

Disconnect power when going away for longer time.

It is highly recommended to activate Power Save Mode
setting to reduce your annual power consumption.
And also it is recommended to disconnect the TV
from the mains plug to save energy more when you
do not use.

Please helps us to save environment by following
these steps.

Repair Information

Please refer all servicing to qualied personnel. Only
qualied personnel must repair the TV. Please contact
your local dealer, where you have purchased this TV
for further information.

Accessories included

Remote Control
Batteries: 2 x AAA
Instruction Book
Side AV Connection Cable

Nero Media Home CD

English - 4 -

TV Control button & Operation

1.Up direction

2. Down direction

3. Programme/Volume / AV / Standby-On selection

switch

The Control switch allows you to control the Volume/
Programme/ Source and Standby-On functions of
the TV.

To change volume: Increase the volume by pushing
the button up. Decrease the volume by pushing the
button down.

To change channel: Press the middle of the button,
the channel information banner will appear on screen.
Scroll through the stored channels by pushing the
button up or down

To change source: Press the middle of the button
twice, the source list will appear on screen. Scroll
through the available sources by pushing the button
up or down.

To turn the TV off: Press the middle of the button
down and hold it down for a few seconds, the TV will
turn into standby mode.

NOTE: You can move the switch, upward or

downward to change the volume. If you want to
change the channel, press the middle of the switch
once (Position 3) and then move upward or downward.
If you press the middle of the switch once more, the
source OSD will be displayed. To select desired
source, move the switch upward or downward and
release. If you press the middle of the switch and
hold for a few seconds, the TV will switch to standby
mode. The Main menu OSD cannot be displayed via
the control buttons on the TV.

DVD - Control buttons

1. Stop / Eject ( / ) button.

Stops the disc playing / Ejects or Loads the
disc.

2. Play / Pause (

/ ) button
Plays / pauses the disc. When DVD menu (root
menu) is active, this button functions as “button
select” (selects the highlighted item in menu) if
this is not prohibited by the disc).

3. Disc loader

NOTE: You cannot eject the disc via the remote

control. To eject while playing a  le; you should press

the STOP button “ / ” (on the TV) three times.

2

3

1

English - 5 -

Remote control button functions - Normal remote (TV)

1. Using My Button 2 (**)

This button’s main function is to switch between
DVB-T, DVB-C and DVB-S broadcasts. However,
if you press MY BUTTON 2 for ve seconds, you
can set a function to it as described in My Button 1.

Note that if you perform rst time installation, MY
BUTTON 2 will return to its default function.

NOTE: The Remote Control range is approximately

7m / 23ft.

SOURCE

.

EXIT

BACK

TV

1. Standby

2. Numeric buttons

3. TV-AV / Channel List / DVB-T/C

4. Volume up/down

5. Mute

6. Navigation buttons

7. Menu on/off

8. OK / Channel List / Hold (in TXT mode)

9. Return/Back/Index page (in TXT mode)

10. Internet portal

11. Media Browser

12. My button 1/ Youtube link (*)

13. Coloured Buttons

14. Mono-Stereo Dual I-II / Audio-Subtitle Language

15. Subtitle on-off / Subtitle (in Media Browser

mode)

16. Rewind (in Media Browser mode)

17. Programme recording

18. Play (in Media Browser mode)Switch to DVD

mode

19. Stop (in Media Browser mode)

20. Pause (in Media Browser mode) / Timeshift

recording

21. Fast Forward (in Media Browser mode)

22. Image size

23. Teletext / Mix

24. My button 2 (**)

- Switches to TV source if pressed on another
source.

- Switches between DVB-T and DVB-C channel
lists (if available).

25. Electronic Programme Guide

26. Exit

27. Quick menu

28. Info / Reveal (in TXT mode)

29. Programme Up-Down

30. Previous programme

31. AV / Source selection

Using My button 1 (*)

This button’s main function is to run Youtube link.
However, if you want to change this function, you
can press MY BUTTON 1 for ve seconds when on a
desired source, channel or link, until the “MY BUTTON
IS SET” message is displayed on the screen. This
confirms that the selected MY BUTTON is now
associated with the selected function. Note that if

you perform rst time installation, MY BUTTON 1 will
return to its default function.

Note : My button 1 cannot be used while in portal
mode.

English - 6 -

Remote control button functions - Normal remote (DVD)

1. Standby

2. Menu

3. OK / Select

4. Return / back

5. Angle

6. Display

7. Repeat

8. Zoom

9. Lang.

10. Rapid reverse

11. Pause

12. Play

13. Stop

14. Fast forward

15. Subtitle

16. Root

17. Title

18. Search Mode

19. Navigation buttons

20. Info

21. Numeric buttons

22. Source selection

NOTE: Remote Control buttons that are not

indicated with a number cannot be used in DVD mode.

SOURCE

.

EXIT

BACK

TV

English - 7 -

Viewing the Connections

NOTE: When connecting a device via the Side AV input, you must use the supplied connection cables to enable connection.
See the illustrations above. | YPbPr can be used only when you connect a device that has a YPbPr output through the PC
input with YPbPr to PC cable (YPbPr to PC cable is not supplied). When the connection is made, switch to YPbPr source.
To enable PC audio, you will need to use PC/YPBPR AUDIO CONNECTION WHITE & RED inputs. | If an external device is
connected via the SCART socket, the TV will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 H.264)
or while in Media Browser mode, output will not be available via the scart socket. | When using the wall mounting kit (optional),
we recommend that you plug all your cables into the back of the TV before mounting on the wall. | Insert or remove the CI
module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings.
Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the TV. The module
should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the
CAM is forcefully inserted.Each USB input of your TV supports devices up to 500mA. Connecting devices that have current
value above 500mA may damage your TV.

Connector Type Cables Device

Scart

Connection

(back)

VGA

Connection

(back)

SIDE AV

PC/YPbPr

Audio

Connection

(side)

Side Audio/Video

Connection Cable

(Supplied)

PC Audio Cable

(Not supplied)

HDMI

Connection

(back)

SPDIFF

Connection

(back)

SIDE AV

Side AV

Connection

(side)

AV Connection Cable

(supplied)

HEADPHONE

Headphone

Connection

(side)

USB

Connection

(side)

CI

Connection

(side)

CAM

module

English - 8 -

Using a Conditional Access Module

IMPORTANT: Insert or remove the CI module only

when the TV is SWITCHED OFF.

In order to watch certain digital channels, a conditional
access module (CAM) can be necessary. This module
must be inserted in the CI slot of your TV.

1. Obtain the Conditional Access Module (CAM) and the
viewing card by subscribing to a pay channel company,
then insert those to the TV using the following procedure.

2. Insert the CAM and then the viewing card to the
slot that is located in the terminal cover at the rear
side of the TV.

3. The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The CAM or
the TV terminal may be damaged if the CAM is
forcefully inserted.

4. Connect the TV to the mains supply, switch on
and then wait for few moments until the card is
activated.

5. When no module is inserted, “No Common
Interface module detected” message appears

on the screen.

You can refer to the module instruction manual for details
of the settings.

CAM

module

Standby Notications

If the TV does not receive any input signal (e.g. From
an aerial or HDMI source) for 5 minutes, the TV will
go into standby. When you next switch-on the TV, the
following message will be displayed:

When the Auto Tv Off timeout is reached, the following
message will be displayed on the screen. Select YES
to shut down the TV. Select NO to cancel. The TV
will switch off as well, if you do not make a selection
on this screen.

If the TV has been left on and not been operated for
4 hours, the TV will go into standby. When you next
switch-on, the following message will be displayed:

English - 9 -

Installing the Batteries to the Remote

1. Lift the cover on the back of the remote upward

gently.

2. Install two AAA batteries. Make sure to match the +
and - ends of the batteries in the battery compartment
(observe the correct polarity.

3. Replace the cover.

Connect Power & Antenna/Cable/Satellite

IMPORTANT: The TV set is designed to operate on

220-240V AC, 50 Hz socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.

SPDIF

VGA

13Vdc /18V dc

300mAMax.

Aerial or Cable

Satellite

DiSEqC
Switch

Switching On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC, 50
Hz. Then the standby LED lights up.

To switch on the TV from standby mode either:

Press the “

” button, P+ / P- or a numeric button on

the remote control.
Press the control switch located on the left side of

the TV. The TV will then switch on.

To Switch the TV Off

Press the “ ” button on the remote control or press
and hold the control switch on the TV, so the TV will
switch to standby mode.

To power down the TV completely, unplug the
power cord from the mains socket.

Note: When the TV is switched to standby mode, standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the rst time, the “language
selection” menu appears. The message “Welcome
please select your language!” is displayed in all
language options listed alphabetically.

Press the “ ” or “ ” button to highlight the required
language, press OK button to select. “First Time

Installation” appears. Use “

” or “ ” button to set

the required country, and press “ ” button to select

Search Type. Use “

” or “ ” to set the desired
search type. Available search types are Digital and
analog, digital only and analog only. When set, press

“

” to select Teletext Language. Use “ ” or “
” button to set the “Teletext Language” and select
“Scan Encrypted” using “ ” or “ ” button. You
can set Scan Encrypted as Yes if you want to scan
coded stations.

Deafult PIN code can change depending on the
selected country.

If you are asked to enter a PIN code for viewing a
menu option, use one of the following codes: 4725,
0000 or 1234.

Press OK button on the remote control to continue and
the following message will be displayed on the screen.

You can activate Store mode (optional) option by

using “

” or “ ” button. If Store Mode (optional)

is selected, Store mode option will be available in

English - 10 -

other settings menu and your TV’s settings will be
optimized for best display quality. A confirmation
screen will be displayed after selecting the
Store Mode (optional). Select YES to proceed.

If Home Mode is selected, Store mode (optional) will
not be available after the First Time Installation. Press
OK button on the remote control to continue and the
following message will be displayed on the screen.

You must select a search type to search and store
broadcasts from the desired source.

Aerial Installation

If you select AERIAL option from the Search Type
screen, the television will search for digital terrestrial
TV broadcasts.

NOTE: You can press MENU button to cancel.

After all the available stations are stored, Channel
List will be displayed on the screen. If you like the
sort channels, according to the LCN(*), please select
“Yes” and than press OK.

Press OK button to quit channel list and watch TV.

(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a

recognizable channel sequence.

Cable Installation

If you select CABLE option and press OK button on
the remote control to continue, the following message
will be displayed on the screen:

To continue please select YES and press OK. To
cancel operation, select NO and press OK.

You can select frequency ranges from this screen. For
highlighting lines you see, use “

” or “ ” button.

You can enter the frequency range manually by using
the numeric buttons on the remote control.

Set Start and Stop Frequency as desired by using
numeric buttons on the remote control.

After this operation, you can set Search Step as 8000
KHz or 1000 KHz.

If you select 1000 KHz, the TV will perform search
process in a detailed way. Searching duration will
thus increase accordingly. When nished, press OK
button to start automatic search. The TV will search
and store available broadcasts.

(*) Network option will not be available for UK.

Satellite Installation

If you select Normal, satellite conguration screen
will be displayed. There are three types of antenna
selection. You can select Antenna type as Direct,

Unicable or DiSEqC switch by using “

” or “ ”

buttons.

*

English - 11 -

Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. After selecting
Direct, another menu screen will be displayed. Select

an available satellite and press OK to scan for services.

Unicable: If you have multiple receivers and a
unicable system, select this antenna type. Press OK to
continue. Congure settings by following instructions

on the screen. Press OK to scan for services.

DiSEqC switch: If you have multiple satellite dishes
and a DiSEqC switch, select this antenna type. After
selecting DiSEqC switch, another menu screen will
be displayed. You can set four DiSEqC options (if
available). Press GREEN button to scan all satellites
or press YELLOW button to scan only the highlighted
satellite. To save and exit press OK button.

Media Playback via USB Input

You can connect a USB hard disk drive or USB
memory stick to your TV by using the USB inputs of
the TV. This feature allows you to play les stored in a
USB drive. 2.5” and 3.5” inch (hdd with external power
supply) external hard disk drives are supported.

IMPORTANT! You should back up your les before
making any connections to the TV set in order to
avoid any possible data loss. Manufacturer will not
be responsible for any le damage or data loss. It is
possible that certain types of USB devices (e.g. MP3
Players) or USB hard disk drives/memory sticks may
not be compatible with this TV. The TV supports FAT32
and NTFS disk formatting but recording will not be
available with NTFS formatted disks. Note: While
formatting a USB hard disk that has 1TB (Tera Byte)
or more le capacity, you can experience problems
with the formatting process.

Quickly plugging and unplugging USB devices, is a
very hazardous operation. Do not repeatedly quickly
plug and unplug the drive. This may cause physical
damage to the USB player and USB device itself. Do
not pull out USB module while playing a le.

Media Browser Menu

You can play photo, music, and movie les stored
on a USB disk by connecting it to your TV and using
the Media Browser screen. To do this, perform the
following: Connect a USB disk to one of the USB
inputs located on the side of the TV.

You can connect two USB devices to your TV. If both
USB devices include music, picture or video les, USB
selection OSD will be displayed on the screen. The
rst USB device connected to the TV will be named
as USB Drive1. Select a device by using “

” or

“ ” button and press OK.

Press MENU button and select Media Browser tab by
using Left/Right and OK buttons. Main media browser
screen will be displayed. You can display the related
content by selecting the Video, Music or Picture tab.
Follow the button indications under each on screen
menu for media playback features.

You can set your Media Browser preferences by using
the Settings dialog.

Using MENU button in Media Browser Mode

Pressing MENU button in Media Browser mode
displays the following menu screen:

You can access Picture, Sound and Settings menu
options using this screen. Press MENU again to exit
from this screen.

Changing Image Size: Picture Formats

Programmes can be watched in different picture
formats, depending on the transmission received.
You can change the aspect ratio (image size) of the
TV for viewing the picture in different zoom modes.
Press “

” button repeatedly to change the image

size. You can shift the screen up or down by using

“ ” or “ ” buttons while in, 14:9 Zoom,
Cinema or Subtitle.

English - 12 -

Using the Channel List

The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options. Press MENU button to view main menu.
Select Channel List item by using Left or Right button.
Press OK to view menu contents. Select Edit Channel
List to manage all stored channels. Use Up or Down
and OK buttons to select Edit Channel List. Press
Up or Down button to select the channel that will be
processed. Press Left or Right button to select a
function on Channel List menu. Use P+/P- buttons to
move page up or down. Press MENU button to exit.

Sorting Channel List

You can select broadcasts to be listed in the
channel list. To display specic types of broadcast,
you should use Active channel list setting. Select
Active channel list from the Channel list menu by
using “ ” or “ ” button. Press OK button to
continue. You can select a network type option

from the list by using “

” or “ ” and OK buttons.

Quick Menu

Quick Settings menu allows you to access some
options quickly. This menu includes Power Save

Mode, Picture Mode, Equalizer Settings,
Favourites and Sleep Timer options. Press Q.MENU

button on the remote control to view quick menu.
See the following chapters for the details of the listed
features.

English - 13 -

Menu Features and Functions

Picture Menu Contents

Mode

For your viewing requirements, you can set the related mode option. Picture mode can
be set to one of these options: Cinema,Game,Sport,Dynamic and Natural.

Contrast

Sets the lightness and darkness values of the screen.

Brightness

Sets the brightness value for the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colors.

Power Save
Mode

To set Power Save Mode as Eco, Picture Off and Disabled. See the section, “Environmental
Information” in this manual for further information on Power Save Mode.

Backlight
(optional)

This setting controls the backlight level and it can be set to Auto, Maximum, Minimum
and Eco Mode. Backlight function will be inactive if Power Save Mode is set to On.

Backlight cannot be activated in VGA, Media Browser mode or while the picture mode
is set to Game.

Noise
Reduction

If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting
to reduce the noise amount. Noise Reduction can be set to one of these options: Low,

Medium, High or Off.

Advanced Settings

Dynamic

Contrast

You can change contrast rate by using dynamic contrast function. Dynamic contrast
can be set to one of these options: Low, Medium, High or Off.

Colour Temp

Sets the desired colour tone.

Picture Zoom

Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3 or Cinema. Auto (Only
available in Scart mode with SCART PIN8 high voltage/low voltage switching).

HDMI True

Black

(optional)

While watching from HDMI source, this feature will be visible in the Picture Settings
menu. You can use this feature to enhance blackness in the picture.

Film Mode
(optional)

Films are recorded at a different number of frames per second to normal television
programmes. Turn this feature on when you are watching lms to see the fast motion
scenes clearly.

Skin Tone

Adjust the desired skin tone.

Colour Shift

Adjust the desired colour tone.

RGB Gain

Press OK button to edit RGB gain. You can congure the colour temperature values
using the RGB Gain feature.

Reset

Resets the picture settings to factory default settings.

Autoposition
(in PC mode)

Automatically optimizes the display. Press OK to optimize.

H Position (in
PC mode)

This item shifts the image horizontally to right hand side or left hand side of the screen.

V Position (in
PC mode)

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock (in
PC mode)

Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase (in PC
mode)

Depending on the resolution and scan frequency that you input to the TV set, you may
see a hazy or noisy picture on the screen. In such a case you can use this item to get
a clear picture by trial and error method.

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings
will be added to the Picture Settings while in PC mode.

English - 14 -

Menu Features and Functions

Sound Menu Contents

Volume Adjusts volume level.

Equalizer:

In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic and
User. Press the MENU button to return to the previous menu. Equalizer menu settings can

be changed manually only when the Equalizer Mode is in User.

Balance This setting is used for emphasizing left or right speaker balance.

Headphone Sets headphone volume.

Sound Mode

You can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel supports
that mode.

AVL

Automatic Volume Limiting (AVL) function sets the sound to obtain xed output level
between programmes (For instance, volume level of advertisements tend to be louder than
programmes).

Headphone/Lineout

(Optional)

When you connect an external amplier to your TV using the headphone jack, you can
select this option as Lineout. If you have connected headphones to the TV, set this option
as Headphone.

Dynamic Bass
(Optional)

Enables or disables the Dynamic Bass.

Surround Sound
(Optional)

Surround sound mode can be changed as On or Off.

Digital Out Sets digital out audio type.

Install and Retune Menu Contents

Automatic Channel

Scan (Retune)

Displays automatic tuning options.

Digital Aerial: Searches and stores aerial DVB stations.

Digital Cable: Searches and stores cable DVB stations.

Analogue: Searches and stores analogue stations.

Digital Aerial & Analogue: Searches and stores aerial DVB and analogue stations.

Digital Cable & Analogue: Searches and stores cable DVB and analogue stations.

Satellite: Searches and stores satellite channels.

Manual Channel Scan This feature can be used for direct broadcast entry.

Network Channel Scan
(Optional)

Searches for the linked channels in the broadcast system.

Analogue Fine Tune

You can use this setting for ne tuning analogue channels. This feature is not available if no
analogue channels are stored.

First Time Installation

Deletes all stored channels and settings, resets TV to factory settings and starts
rst time installation. You can follow the instructions in the Initial Installation section
for more information on this process.

Clear Service List
(Optional)

(*) This setting is visible only when the Country option is set to Denmark, Sweden, Norway
or Finland. Use this setting to clear channels stored.

English - 15 -

Menu Features and Functions

Settings Menu Contents

Conditional

Access

Controls conditional access modules when available.

Language Congures language settings.

Parental

Congures parental settings.
Deafult PIN code can change depending on the selected country.

If you are asked to enter a PIN code for viewing a menu option, use one of the following
codes: 4725, 0000 or 1234.

Timers

Sets timers for selected programmes.

Recording

Conguration

Displays recording conguration menu.

Date/Time

Sets date and time.
Note:
* The TV takes the time info via the broadcast. Correct time will be available on Date/

Time Settings, if the time info is provided in the broadcast.
If the TV is in no channel mode, Date/Time settings can be changed. However, if

there is a channel preset, only “Time Settings Mode” can be changed and if this is
set to Manual, Time Zone will be enabled.

* If the TV is switched to standby mode and switched on later and there is no broadcast
available, time information will not be updated. If there is a present broadcast; however,
time information will be taken via the broadcast. In other words, time information will be
available according to these priorities: The TV rst looks for the time info in the broadcast,
then to the user preference, and lastly to the teletext time information.

Sources

Enables or disables selected source options.

Satellite Settings

Displays satellite settings.

Network Settings

(Optional)

Displays network settings.

Other Settings: Displays other setting options of the TV set:

Menu Timeout

Changes timeout duration for menu screens.

Scan Encrypted

When this setting is on, search process will locate the encrypted channels as well. If it is
set as Off, encrypted channels will not be located in automatic search or manual search.

Blue Background

Activates or deactivates blue background system when the signal is weak or absent.

Software Upgrade

To ensure that your TV always has the most update information, you can use this setting.
In order for the proper operation, please ensure that the TV is set to standby mode.

Application
Version

Displays application version.

Hard of Hearing

If the broadcaster enables any special signal concerning the audio, you can set this
setting as On to receive such signals.

Audio Description

Audio description refers to an additional narration track for blind and visually impaired
viewers of visual media, including television and movies. You can use this feature, only
if the broadcaster supports that additional narration track.

Auto TV Off

You can set the timeout value of auto off feature.After the timeout value is reached and
the Tv is not operated for selected time , the TV will go off.

Standby Search
(optional)

If you change Standby Search to Off, this function will be unavailable. To use Standby
search please make sure that you select Standby Search as On. If the Standby Search
is set to On, when the TV is in standby mode, available broadcasts will be searched. If
the TV locates any new or missing broadcasts, a menu screen will be displayed, asking
you whether or not to execute these changes. Channel list will be updated and changed
after this process. Please activate Standby Search setting in order to enable your TV for
automatically updating the broadcast frequency of the broadcaster, broadcast denition
and similar changes.

English - 16 -

Menu Features and Functions

Other Settings: Displays other setting options of the TV set:

Store Mode
(optional)

If you are displaying the TV in a store, you can activate this mode. While Store Mode
is enabled, some items in the TV menu may not be available to be set.

DLNA Renderer

DLNA Renderer feature allows you to share les stored on your smartphone. If you
have a DLNA Renderer compatible smartphone and software installed, you can
share/play photos with your TV. See instructions of your sharing software for more
information. DLNA renderer mode will not be available with internet portal feature.

Power Up Mode

This setting congures the power up mode preference. Always On: The TV always switches
on when main on/off button is pressed. / Standby: The TV always powers up in Standby
mode. / Last State: The TV always switches on with the last selected channel/source.

Biss Key

Biss is a satellite signal scrambling system that is used for some broadcasts. If you
need to enter BISS key on a broadcast, you can use Biss Key setting located in the
Other Settings menu. Highlight Biss Key and press OK to enter keys on the desired
broadcast.

Virtual Remote
(optional)

Enables or disables the virtual remote feature.

English - 17 -

Electronic Programme Guide (EPG)

Some, but not all channels send information about the
current and next programmes. Press the EPG button

to view the “

” menu.

Up/Down/Left/Right: Navigate EPG.

OK: Displays programme options.

INFO: Displays, in detail information on programme

selected.

GREEN: Switches to List Schedule EPG.

YELLOW: Switches to Timeline Schedule EPG.

BLUE: displays ltering options.

(RECORD): the TV will start to record the
selected progamme. You can press again to stop
the recording.

IMPORTANT: To record a programme, you should first
connect a USB disk to your TV while the TV is switched off.
You should then switch on the TV to enable recording feature.
Otherwise, recording feature will not be available.

Note: Switching to a different broadcast or source is not
available during the recording.

Programme Options

In EPG menu, press the OK button to enter the Event
Options menu.

Select Channel

In EPG menu, using this option, you can switch to the
selected channel.

Record / Delete Record Timer

After you have selected a programme in EPG menu,
press the OK button and and Options screen will be
displayed. Select “Record” option and press the OK
button. After this operation, a recording becomes set
to the selected programme.

To cancel an already set recording, highlight that
programme and press the OK button and select the
option “Delete Rec. Timer”. The recording will be
cancelled.

Set Timer / Delete Timer

After you have selected a programme in EPG menu,
press the OK button and and Options screen will
be displayed. Select “Set Timer on Event” option
and press OK button. You can set a timer for future
programmes. To cancel an already set timer, highlight
that programme and press the OK button. Then select
“Delete Timer” option. The timer will be cancelled.

Note: It is not possible to record or set timer for two or more
individual events at the same time interval.

Recording a Programme

IMPORTANT: When using a new USB hard disk drive, it is

recommended that you rst format the disk using your TV’s

“Format Disk” option.

To record a programme, you should rst connect a
USB disk to your TV while the TV is switched off.
You should then switch on the TV to enable recording
feature.

For using recording function, you should connect a
USB disk or an external hard disk drive to the TV
and connected USB disk should have at least 1 GB
capacity and should have 2.0 speed compatibility.
If the connected USB device does not support 2.0
speed, an error message will be displayed.

Note: Recorded programmes are saved into the connected
USB disk. If desired, you can store/copy recordings on a

computer; however, these les will not be available to be

played on a computer. You can play the recordings only
via your TV.

Note: Lip Sync delay may occur during the timeshifting.

Radio record is not supported. The TV can record

programmes up to ten hours.

Recorded programmes are split into 4GB partitions.

If the writing speed of the connected USB disk is not
sufcient, recording may fail and timeshifting feaute
may not be available.

Recordings of HD programmes can occupy bigger
size on the USB disk depending on the broadcast’s
resolution. For this reason it is recommended
to use USB hard disk drives for recording HD
programmes.

Do not plug out the USB/HDD during the recording.
This may harm the connected USB/HDD.

Multipartiton support is available. Maximum two
different partitions are supported. If the disk have more
than two partitions, crash may occur. First partition
of the usb disk is used for PVR ready features. It also
must be formatted as primary partition to be used for
PVR ready features.

Some stream packets may not be recorded because
of signal problems, so sometimes video may freezes
during playback.

English - 18 -

Record, Play, Pause, Display (for PlayListDialog)
keys could not be used when teletext is ON. If a
recording starts from timer when teletext is ON,
teletext is automatically turned off. Also teletext
usage is disabled when there is ongoing recording
or playback.

Timeshift Recording

Press (PAUSE) button while watching a broadcast
for switching to timeshifting mode. In timeshifting
mode, the programme is paused and simultaneously
recorded to the connected USB disk. Press (PLAY)
button again to watch the paused programme from
the stopped moment. You will see the timeshift gap
between the real and the timeshifted programme in
the info bar.

Instant Recording

Press (RECORD) button to start recording an
event instantly while watching a programme. You can
press (RECORD) button on the remote control
again to record the next event on the EPG. In this
case, OSD will display the programmed events for
recording. Press (STOP) button to cancel instant
recording. Switching to a different broadcast or source;
and viewing Media Browser are not available during
the recording.

Watching Recorded Programmes

In the main menu, use “ ” or “ ” buttons to select
Media Browser. Highlight Recordings Library item
by using “ ” or “ ” button and press OK button to
enter. Recordings Library will then be displayed.
Select a recorded item from the list (if previously
recorded) by using “ ” / “ ” button. Press OK button
to view Play Options. Select an option by using “ ”
/ “ ” or OK buttons.

Available playback options:

• Play from start: Plays the recording from the
beginning.

• Resume: Recommences the recordings.

• Play from offset: Species a playing point.

Note: Viewing main menu and menu items will not be available
during the playback.

Press (STOP) button to stop a playback and return
to return to Recordings Library.

Slow Forward

If you press

(PAUSE) button while watching
recorded programmes, slow forward feature will be
available. You can use

button to slow forward.

Pressing

button consecutively will change slow

forwarding speed.

Recordings Library

To view the list of recordings, select “Recordings
Library” and press the OK button. Recordings Library

will then be displayed with available recordings. All the
recordings are kept in a list in the recordings library.

(Resume): Recommences the recordings.

RED button (Delete) :Erases the selected

recording.

GREEN button (Edit): Makes changes on the
selected recording.

BLUE button (Sort): Changes the order of the
recordings. You can select from a wide range of
sorting options.

OK button: Activates play options menu:

INFO (Details): Displays the short extended programmes

in detail.

Connectivity Functions

Connecting to a Wired Network

For connecting to a wired LAN network, you
should perform the following steps:

• Connect broadband ISP connection ethernet cable

to the ETHERNET INPUT of your modem.

• Ensure that Nero Media Home software is installed

to your PC.(for DLNA function). See Appendix G for
more information on the installation process.

• Afterwards, you should connect your PC to the one

of your modem’s LAN connectors (e.g. LAN 1) by
using a proper LAN cable.

• Use another LAN output of your modem (e.g. LAN

2) to enable the connection to your TV. You can add
your TV to your LAN by connecting the LAN port at
the rear of your TV to your modem’s LAN connector
as illustrated.

English - 19 -

Lan(Ethernet cable)

Broadband ISP
Connection

Rear of TV

• To access and play shared les, you must Select
Media Browser. Press Menu button and select Media
Browser by using Left or Right button. Press OK to
continue. Select the desired le type and press OK.
You must always use the Media Browser screen to
access and play shared network les.

• PC/HDD/Media Player or any other devices that are
DLNA 1.5 compatible should be used with wired
connection for higher playback quality.

To congure wired settings please refer Network

Settings section in Settings menu.

• You might be able to connect your TV to your LAN
network depending on your network’s conguration.
In such a case, use an ethernet cable to connect
your TV directly to the network wall outlet.

The modem port
on the wall

Rear of TV

Connecting to a Wireless Network

IMPORTANT: “Veezy 200” USB dongle is required to

use wireless network feature.

• To use your TV with your wireless network, you
need a Veezy 200 Wireless USB dongle. To make
your modem’ s SSID visible, you should change
your SSID settings via modem’s software. The TV
cannot connect to the networks with hidden SSID.

For connecting to a wireless LAN network, you
should perform the following steps:

1. Connect broadband ISP connection ethernet
cable to the ETHERNET INPUT of your modem.

2. Ensure that Nero Media Home software is
installed to your PC (for DLNA function).

3. Afterwards, you should connect wireless adaptor
to one of the USB inputs of the TV.

4. To configure wireless settings please refer
Network Settings section in the following sections.

Wireless Lan
Adaptor

USB Inputs (Side of the TV)

Broadband ISP
Connection

• A Wireless-N router (IEEE 802.11a/b/g/n) with

simultaneous 2.4 and 5 GHz bands designed to
increase bandwidth. Optimized for smoother and
faster HD video streaming, file transfers, and
wireless gaming.

• Use LAN connection for quicker le sharing between

other devices like computers.

• The frequency and channel differ depending on

the area.

• The transmission speed differs depending on the

distance and number of obstructions between the
transmission products, the conguration of these
products, the radio wave conditions, the line trafc,
and the products that you use. The transmission
may also be cut off or get disconnected depending
on the radio wave conditions DECT phones, or any
other WiFi 11b appliances. The standard values of
the transmission speed are the theoretical maximum
values for the wireless standards. They are not the
actual speeds of data transmission.

• The location where the transmission is most effective

differs depending on the usage environment.

• Wireless LAN adaptor should be connected directly

to the TV’s USB port. USB hubs are not supported.

• To configure wireless settings please refer wifi

section in Settings menu.

English - 20 -

• Wireless LAN adaptor supports 802.11 a,b,g & n
type modems. It is highly recommended that you
should use IEEE 802.11n communication protocol
in order to avoid any possible problems while
watching videos.

• Use the other usb input, if you experience problems
with audio/video performance.

• You must change your modem’s SSID when there
are any other modems around with the same SSID.
You can encounter connection problems otherwise.
Use wired connection instead if you experience
problems with wireless connection.

Conguring Network Settings

Your TV’s Network Settings include Wired and Wireless

Connection options. However, if your TV does not have USB
Wi-Fi dongle, you should use Wired Connection type. If you
try to connect via Wireless Connection when your TV does not
have a USB Wi-Fi dongle, a warning screen will appear and
the TV will not get an IP address. Try connecting the LAN cable
after this and then the TV will be able to get an IP address.

Conguring Wired Device Settings

If you are connecting the TV via ETHERNET INPUT,
select Network Type as Wired Device to congure.

Network Type

Network type can be selected as Wired or Wireless
device, in accordance with the active connection to the
TV set. Select this as Wired if you have connected to
the TV a LAN cable. Select as Wireless if you connect
via the wireless USB dongle.

Conguration Status

This section displays the status of the connection.
Select Connected if you want to activate connection.
Select as Not Connected to end an active connection.

IP Address

If an active connection is available, the IP address will
be displayed on this section. If you want to congure
IP address preferences, press GREEN button and
switch to the advanced mode.

Conguring Wired Network Settings in

Advanced Mode

After pressing GREEN button, Advanced mode will
be available. While in Advanced Mode, press RED
button to edit settings. When nished, press OK to
save, Press RETURN/BACK to cancel.

Conguring Wireless Device Settings

(Optional)

IMPORTANT: “Veezy 200” USB dongle is required to

use wireless network feature. To use your TV with your
wireless network, you need a “Veezy 200” Wireless
USB dongle.

Wi-Fi feature can be used for a wireless network
connection. The feature is used for infrastructure
purposes only, such as connecting to the web, hbb
sites and connecting with DLNA servers (optional). If
you have the Veezy 200 Wi Dongle, select Network
Type as Wireless Device to start connection process.

To enable Wi-Fi feature, proles should be congured
properly. Please plug in the Wi-Fi dongle to one of the
USB ports.

Press YELLOW button to scan wireless network from
network settings menu. Afterwards, available network
list will be displayed. Please select your desired
network from the list.

If the selected network is protected with a password,
please enter the correct key by using the virtual
keyboard. You can use this keyboard via navigation
buttons (Left/Right/Up/Down) and OK button on the
remote control.

Wait until the IP the address is shown on the screen.

English - 21 -

This means that the connection is now established.
To disconnect from a wireless network, you should
highlight Conguration Status and press OK.

You can navigate between menu tabs by pressing left/
right buttons. The help bar on the bottom of the dialog
shows features that you may use. Press BLUE button
to check your internet connection speed.

You can check the signal strenght by using the network
settings menu for the wireless device mode.

Information

Configuration Status: Displays wi-fi status as

connected or not connected.

IP Address: Displays the current IP address.

Network Name: Connected networks’ name will be

displayed.

Press GREEN button to switch to advanced mode
and then press OK button to edit settings.

Delete Saved Wi Proles

Saved proles will be deleted if you press red button
while wireless device selection osd is on the screen.

Connecting to your Cell Phone via WiFi
(Optional)

• If your cell phone has WiFi feature, you can connect

your cell phone to your TV by using WiFi connection
via a router, in order to play content from your phone.

For this, your cell phone must have an appropriate
sharing software.

• Connect to your router following the steps stated
above in the Wireless Connection section.

• Afterwards, engage your cell phone with the router
and then activate sharing software on your cell
phone. Then, select les that you would like to share
with your TV.

• If the connection is established correctly, you should
now access the shared les of your cell phone via
the Media Browser of your TV.

• Enter Media Browser menu and playback device
selection OSD will be displayed. Select your cell
phone’s ident and press OK to continue.

Note: This feature may not be supported by some cell

phones.

Connectivity Troubleshooting

Wireless Network Not Available

Ensure that the firewalls of your network allows
the TV wireless connection. “Veezy 200” usb wi
dongle should be plugged properly (if available). If
the wireless network does not function properly, try
using the wired network in your home. Refer to the
Wired Connection section for more information on
the process.

If the Net TV does not function, check the modem
(router) rst. If the router does not have a problem,
check the internet connection of your modem.

Try searching for wireless networks again, using the
Network Settings menu screen.

Connection is Slow

See the instruction book of your wireless modem to get
information on the internal service area, connection
speed, signal quality and other settings. You need to
have a high speed connection for your modem.

Distruption during playback or slow
reactions

You could try the following in such a case:

Keep at least three meters distance from microwave
ovens, mobile telephones, bluetooth devices or any
other Wi-Fi compatible devices. Try changing the
active channel on the WLAN router.

Using DLNA Network Service

DLNA (Digital Living Network Alliance) is a standard
that eases viewing process of digital electronics and
makes them more convenient to use on a home
network. For further information, visit www.dlna.org.

English - 22 -

DLNA standard allows you to view and play photos,
music and videos stored in the DLNA media server
connected to your home network.

Step 1: Nero Media Home Installation

DLNA function cannot be used if the server program
is not install to your PC. Please prepare your PC
with the provided Nero Media Home programme.

For more information about the installation, please
refer to appendix .

Step 2: Connect to a Wired or Wireless Network

See the chapter Network Settings for detailed conguration

information.

Step 3: Play Shared Files via Media Browser

Select Media Browser by using Left or Right button
from the main menu and press OK button. Media
browser will be then displayed.

DLNA support is available only with Media Browser
folder mode. To enable folder mode, go to Settings
tab in the main media browser screen and press
OK. In the settings options, highlight View Style and
change to Folder using Left or Right button.

Please select desired media type and press OK.

If sharing congurations are set properly, the following
OSD message will be displayed after selecting the
desired media type. Select OK to display the selected
network or USB memory content. If you want to refresh
the device list, press GREEN button. You can press
MENU to exit.

If available networks are found, they will be listed on
this screen. Select media server or network that you
want to connect by using “

” or “ ” buttons and press

OK button.

If you select media type as Video and choose
a device from the selection menu, a new menu
screen will appear on the screen as below:

Select Videos from this screen to list all the available
video les from the selected network.

To play other media types from this screen, you
must go back to main Media Browser screen and
select media type as desired and then perform the
network selection again. Refer to Media Browser
USB Playback section for further information on le
playback.

Subtitle les do not work if you watch video from
network through DLNA.

You can connect only one television with DLNA to
same network. If a problem occurs with DLNA network,
please switch on/off your television. Trick mode and
jump are not supported with DLNA function.

CAUTION:

There may be some PC’s which may not be able to
utilize the DLNA function due to administrator and
security settings. (such as business PC’s).

For best home network streaming with this set, the
supplied Nero software should be installed.

English - 23 -

Internet Portal

You can access PORTAL mode using your TV. To
do this, an active internet connection is required.
Follow the steps on Connecting to a Wired (optional)
Network section to connect your TV to internet. After
the connection is established, you can select or view
portal options.

Note: Broadband internet connection is required
for high quality viewing. Ensure that the internet
connection is made properly. You must set the
Country and Language data correctly in the First Time
Installation for the proper operation of internet portal.

Press “

” button on your remote control and portal
application options will be displayed. Application
options will be displayed as the template below.
Available applications’ contents may change
depending on the application content provider.

Select a link or application using the Left and Right or
Up or Down buttons and press OK to activate.

• Use Up/Down and Left/Right buttons to navigate

between the items on Portal screen.

• Press OK button to conrm your selection.

• Press BACK to go to the previous screen.

• Press EXIT to quit internet portal mode.

Note: Possible application dependent problems may
be caused by the content service provider.

Not: Virtual remote controller application could be
available to be downloaded from your smartphone
application provider.

Not all smartphones are supported by this application

DVD MODE

Handling Discs

• To keep the disc clean, only handle the disc by its
edge. Do not touch the surface.

• Do not stick paper or tape on the disc.

• If the disc is contaminated with any substance like
glue, remove before using it.

• Do not expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as the temperature can rise
quickly and damage the disc.

• After playing, store the disc in its case.

Cleaning Discs

• Before playing, clean the disc with a cleaning cloth.
Wipe the disc from the centre out.

• Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.

DVD - Features

• DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG
playback.

• NTSC / PAL playback (according to disc content).

• LPCM audio via coaxial and optical digital audio
outputs (optional).

• Multi-Audio (up to 8) support (according to disc
content).

• Multi-Subtitle (up to 32) support (according to disc
content).

• Multi-Angle (up to 9) support (according to disc
content).

• 8 level parental control.

• Fast forward and rewind - 5 different speeds:
2x, 4x, 8x, 16x, 32x.

• Slow motion playback - 4 different speeds:
1/2x, 1/4x, 1/8x, 1/16x forward.

• Frame by frame forward playback.

• Search Mode.

• Repeat.

• Coaxial audio output (optional).

• Copied disks may be incompatible.

How to watch a DVD

NOTE: DVD mode cannot be accessed unless a DVD

is inserted or a DVD control button is pressed.

If you switch to another source by pressing
SOURCE, SWAP or P+/P- buttons on the remote
control, DVD playback will be paused automatically.
You should press PLAY and resume the playback
manually when you switch to DVD mode.

English - 24 -

1. Switch on the TV.

2. Switch to DVD source using the “

SOURCE

” button on

the remote control.

3. Insert a disc into the loader.

The disc MUST be facing you when looking at the
TV screen.

Most discs will be automatically loaded and play will
start automatically if the disc does not have any menus
recorded on it.

If play does not start automatically, press the play
button “

” on the remote control, or the play button

“

/ ” on the right side of the TV.

A menu may appear on the TV screen after a few
moments or the lm may start immediately after the
Film/TV Company introduction. This will depend on
the disc content and may differ on each disc.

NOTE: Steps 4 and 5 are only available when

a menu is recorded on the disc.

4. Press the navigation buttons “

” , “ ” ,“ ” or

“

” or the number button/s to select the required title.

5. Press the OK button. The selected item starts to play.

Notes on DVD Playback

a. No sound will be heard during Rapid advance or

Rapid reverse.

b. No sound will be heard during Slow motion play.

c. Reverse Slow motion play is not available.

d. In some cases, the subtitle language will not be

changed immediately to the selected one.

e. When the preferred language will not select, even
after pressing the button several times, it means the
language is not available on the disc.

f. When the DVD player is restarted or the disc
is changed, the subtitle selection is automatically
changed back to the initial settings.

g. If a language is selected that is not supported by
the disc, the subtitle language will automatically be
set to the disc’s priority (default) language.

h. Usually a ‘circulation’ will happen while switching
to another language, this means you can cancel

the subtitle by pressing the same button a number
of times until “Subtitle Off” appears on the screen.

i. When the power is turned on or the disc is
removed, the language heard will be the one
selected at the initial settings.

j. Some DVDs may not contain root and/or title
menus.

k. Reverse stepping is not available.

l. For reference: If you attempt to enter a number

greater than the total time of the current title, the

time search box disappears and “Input Invalid
” message appears on top-left corner of screen.

m. The slide show is disabled when the ZOOM mode
is on.

DVD Mode Conguration

1. While in DVD source, press DISPLAY button to
access DVD Setup menu. This is only possible if
there is no playback.

2. This menu is operated using “ ” or “ ” and “
” or “ ” buttons.

TV Type

TV Type is only available as ‘PAL’. The TV set also
supports NTSC signal; however, the signal will be
converted to PAL when it appears on the screen.

Language Setup

This menu is used for setting language preferences
in DVD mode. Language menu contents are detailed
below:

OSD LANG

You can select the default OSD language of the
player menus

AUDIO

You can select the default audio language if supported
by the DVD disc.

DISC MENU

You can select the DVD’s disc menu language among
these languages. Disc menu appears in the selected
language, if supported by the DVD disc.

English - 25 -

SUBTITLE

You can select the default subtitle language if
supported by the DVD disc.

Preferences: These are the DVD mode preferences.
Menu contents are detailed below:

DEFAULT

If you choose RESET and press SELECT, the factory­presets are loaded. Parental level and parental
password does not change.

DOWNMIX

This mode can be selected when the digital audio
output of the TV is used.

SURROUND

Surround sound output.

STEREO

Two channels stereo.

PARENTAL

Playing some DVDs can be limited depending on the
age of users. The “Parental Control” function allows
playback limitation level to be set by the parent.
Parental Level can be adjusted to one of the eight
levels. Level “8 ADULT” adjustment let you watch all
of the DVD titles ignoring the DVD disc’s parental
level. You can watch the DVD discs, which has the
same or lower parental level than the player’s level
only. Menu contents are detailed below:

PASSWORD

Using this item you can change the current
password. To change the password you will be
prompted to enter your old password. After you have
entered your old password, you can now enter the
new 4-digit password. You can use C key to delete
the incorrect entry.

NOTE: Factory preset of the password is
“0000”. You have to enter XXXX digital password
every time you want to change the parental level. If
you forget your password please contact technical
service.

SPDIF OUTPUT

You can set Spdif Output as PCM or RAW. If you
select PCM from SPDIF Output in DVD menu and
play DVD with Dolby audio, you can get audio output
with two channels via the speakers and the SPDIF
Out. If you select RAW from SPDIF Output in DVD
menu and play DVD with Dolby audio, speakers
will be muted and you can get 5+1 Dolby audio via
the SPDIF Out.

English - 26 -

DVD Controls

You can operate DVD, movie CD, music or picture CD’s content by using the correct buttons on your remote
control. Below are main functions of commonly used remote control buttons.

Other Functions – Button Combinations (During playback)

+

Slow forward

(

+

) +

Sets slow forward speed

+

Sets rapid advance speed

+

Sets rapid reverse speed

+

Conrms stop command

Buttons DVD Playback Movie Playback Picture Playback Music Playback

Play Play Play Play

Pause Pause Pause Pause

Stop Stop Stop Stop

/

Skip backward/forward Skip backward/forward Rotate Skip backward/forward

/

Highlights a menu item / Shifts the zoomed picture up or down (if available).

/

Rapid advance / Rapid reverse

Views the scene from different angles (if

available)

Changes slide effect

(depends on the

content)

X

Displays time / Views main setup menu

Time counter mode selection (during playback). Press repeatedly to switch between modes.

LANG. Auto language X X

MENU Displays TV menu.

OK Enter / View / Play

GREEN

BUTTON

Displays repeat options.

RETURN Returns back to the previous menu (if available).

YELLOW
BUTTON

Goes back to the root folder (if available).

Direct selection of scenes or time. Selects the desired file. Selects the desired file.

SUBTITLE Subtitle on-off. Press repeatedly to switch

between subtitle options.

X X

BLUE

BUTTON

Displays disc menu
(if available).

Displays disc menu

(if available).

X X

RED

BUTTON

Zooms picture. Press repeatedly to switch between zoom options.

English - 27 -

Teletext

“ ” Teletext / Mix: Activates teletext mode when

pressed once. Press again to place the teletext screen
over the programme (mix). Pressing again will quit
the teletext mode.

“BACK” Index: Selects the teletext index page.
“İ” Reveal: Shows hidden information (e.g. solutions

of games).

“OK” Hold: Holds a text page when convenient. Press
again to resume.

“

” / “ ” Subcode Pages: Selects subcode pages if

available when the teletext is activated.

P+ / P- and numbers (0-9): Press to select a page.

Note: Most TV stations use code 100 for their index pages.

Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics. When
FASTEXT system is available, sections in a teletext
page will become colour-coded and can be selected
by pressing the coloured buttons. Press a coloured
button that corresponds to with your needs. The
coloured writings will appear, showing you which
coloured buttons to use when TOP text transmission
is present. Pressing “ ” or “ ” commands will
request the next or previous page respec tively.

Digital Teletext (for UK only)

• Press the “ ” button. The digital teletext information

appears. Operate it with the coloured buttons, cursor
buttons and OK button.

The operation method may differ depending on the
contents of the digital teletext. Follow the instructions
displayed on digital teletext screen.

When the “

”button is pressed again, the TV returns

to television broadcasting.

Using SatcoDX Feature

You can perform SatcoDX operations using the
Satelite Settings. On SatcoDX menu, there are
two options regarding to satcodx feature as in the
following:

You can download or upload satcoDX data. In order
to perform these functions supported for satcodx
feature, a USB device must be connected to the TV
in the rst place.

You will be able to upload current services and related
satellites & transponders in TV, to a USB device.

In addition to the uploading feature you will be able
to download one of the satcodx les stored in USB
device, to the TV.

When you select one of these satcodx files, all
services and related satellites and transponders in
the selected le will be stored in TV. If there are any
installed terrestrial, cable and/or analog services, they
will be kept and only satellite services will be removed.

Afterwards, check your antenna settings and make
changes if necessary. An error message stating “No
Signal” may be displayed if antenna settings are not
congured properly.

Software Upgrade

Your TV is capable of finding and updating new
software upgrades over broadcast channels. For
broadcast channels search, TV looks the available
channels stored in your settings. So before software
upgrade search, it is advised to auto search and
update all available channels.

1) Software upgrade search via user
interface

• It is possible manually to check if there is a new
software upgrade for your TV set.

• Simply navigate on your main menu. Choose

Settings and select Other Settings menu. In Other
Settings menu navigate on to the Software Upgrade

item and press OK button to open Upgrade Options
menu.

• In Upgrade Options menu select Scan for upgrade
and press OK button.

• If a new upgrade is found, it starts to download
the upgrade. A progress bar indicates the remaining
download progress. When download completes with
success a message is displayed for reboot to activate
new software. Press OK to continue with the reboot
operation.

2) Background search and upgrade mode

• While TV is connected to Internet, in background
it searches for critical software upgrades. If a critical
software upgrade is found it downloads the upgrade
silently. When download completes with success a
message is displayed for reboot operation to activate
new software. Press OK to continue with the reboot
operation.

3) 3.AM search and upgrade mode

• If Automatic scanning in Upgrade Options menu
is enabled, TV wakes up at 03:00 and searches
broadcast channels for new software upgrade. If new
software is found and downloaded successfully, with
next power up TV opens with new software version.

Note on reboot operation: Reboot is the last step in software

upgrade operation if download of new software is nished
successfully. During reboot TV makes nal initialization. In

English - 28 -

reboot sequence panel power is closed and front led indicates
the activity with blinking. Around 5 minutes later TV restarts
with new software activated.

• If your TV fails to restart in 10 minutes, unplug power
for 10 minutes and re-plug again. TV should open with
new software safely. If you still can not get TV working,
please kindly repeat unplug and plug sequence a few
times more. If your set still can not operate, please call
the service personnel to x the problem for you.

Caution: While led is blinking during reboot do not unplug
your TV’s power. Doing this may cause your TV not to

re-open again and can only be xed by service personnel.

Manual Software Update

Ensure that the ethernet cable is connected to your
TV. If the ethernet cable is connected to the TV, ensure

that the TV is receiving. Check that the Good is
present in the following menu path:

Menu -> Settings -> Network Settings -> Conguration
Status -> Connected

Go to Settings tab from the main menu and select
Other Settings. Highlight Software Upgrade and
press OK.

Select Scan for Upgrade and press OK button.

An OSD screen including the progress bar will be
visible under the Software upgrade” title.

A warning screen will be displayed on the screen,
stating that the TV will be rebooted. Press OK button
to nalize upgrade process and reboot TV.

Troubleshooting & Tips

Image persistence - ghosting

Please note that ghosting may occur while displaying
a persistent image (still or paused image). LED TVs’
image persistence may disappear after a short time. Try
turning off the TV for a while. To avoid this, do not leave
the screen in still picture mode for extended periods.

No power

If your TV has no power, please check the power cord
plug is connect to the mains power socket.

Poor picture

1. Have you selected the correct TV system?

2. Is your TV or house aerial located too close to a

non-earthed audio equipment or neon lights, etc.?

3. Mountains or high buildings can cause double
pictures or ghost images. Sometimes you can improve
the picture quality by changing the direction of the
aerial. Is the picture or teletext unrecognisable?

4. Check if you have entered the correct frequency.

5. Please retune the channels.

6. The picture quality may degrade when two devices

are connected to the TV at the same time. In such a
case, disconnect one of the devices.

No picture

1. No Picture means that your TV is not receiving a

transmission. Have you selected the correct button on
the remote control? Try once more. Also make sure
the correct input source has been selected.

2. Is the aerial connected properly?

3. Are the plugs connected tightly to the aerial socket?

4. Is the aerial cable damaged?

5. Are suitable plugs used to connect the aerial?

6. If you are in doubt, consult your dealer.

No sound

1. Has the TV been set to mute? To cancel mute, press

the “

” button, or increase the volume level.

2. Sound is coming from only one speaker. Is the
balance set to one extreme? See Sound Menu
section.

Remote control - does not operate

Your TV no longer responds to the remote control. The
batteries may be exhausted, if so you can still use the
control buttons on the TV. (* Is only possible if they
are not blocked by parental control.)

Input sources - can not be selected

1. If you cannot select an input source, it is possible

that no device is connected.

2. Check the AV cables and connections if you have
tried to connect a device.

Recording Unavailable

To record a programme, you should  rst connect
a USB disk to your TV while the TV is switched
off. You should then switch on the TV to enable
recording feature. Otherwise, recording feature will
not be available. If you cannot perform recording, try
switching off the TV and then re-inserting the USB

device while the TV is switched off.

USB Is too Slow

If “USB is too slow” message is displayed on the
screen while starting a recording, try restarting
the recording. If you still get the same error, it is
possible that your USB disk does not meet the speed
requirements. Try connecting another USB disk.

Internet Connection Not Available / DLNA Mode
Not Operating

If the MAC address (a unique identier number) of
your PC or modem has been permanently registered,
it is possible that your TV might not connect to
the internet. In such a case, the MAC address is
authenticated each time when you connect to the
internet. This is a precaution against unauthorized
access. Since your TV has its own MAC address,
your internet service provider cannot validate the MAC
address of your TV. For this reason, your TV cannot

English - 29 -

connect to the internet. Contact your internet service
provider and request information on how to connect
a different device, such as your TV, to the internet.

It is also possible that the connection may not be
available due to a firewall problem. If you think
this causes your problem, contact your internet
service provider. A rewall might be the reason of a
connectivity and discovery problem while using the TV
in DLNA mode or while browsing via DLNA.

Invalid Domain

Ensure that you have already logged on to your PC
with an authorized username/password and also
ensure that your domain is active, prior to sharing
any les in your DLNA server program on your PC. If
the domain is invalid, this might cause problems while
browsing les in DLNA mode.

The DVD picture quality is poor

1. Make sure the DVD disc surface is not damaged

(no scratches, ngerprints etc.).

2. Clean the DVD disc and try again. See instructions
in “Cleaning Discs” to clean your disc properly.

3. Ensure that the DVD disc is in the loader with the
label facing you when looking at the TV screen.

4. A damp DVD disc or condensation may effect the
equipment. Wait for 1 to 2 hours in Stand-by mode to
dry the equipment.

The Disc does not play

1. No disc in the machine - Place a disc into the

loader.

2. Disc is incorrectly loaded - Ensure that the DVD
disc is in the loader with the label facing you when
looking at the TV screen.

3. Wrong type of disc. The DVD player cannot play
CD-ROMS etc.

4. The region code of the DVD disc must match the
player.

Ensure that the DVD disc is in the loader with the label
facing to the front.

Wrong type of disc. The machine cannot play CD­ROMS with PC-Data.

Wrong OSD language

1. Select the language in the setup menu.

2. The language for the sound or subtitles on a DVD

disc cannot be changed.

3. Multilingual sound and/or subtitles are not
recorded on the DVD disc.

4. Try to change the sound or subtitles using
DVD’s title menu. Some DVD’s do not allow the
user to change these settings without using the
disc’s menu.

Angle, Zoom etc. functions do not work

1. These functions are not available on the DVD.

2. Angle can only be changed when the angle symbol

is displayed.

If nothing works.

If you have tried the above solutions and none seem
to work, try switching your TV-DVD off and on again.
If this does not work, contact your supplier or TV-DVD
repair technician. Never attempt to repair a defective
TV-DVD yourself.

Information for Users on Disposal of Old Equipment
and Batteries

[European Union only]

These symbols indicate that equipment with these
symbols should not be disposed of as general
household waste. If you want to dispose of the product
or battery, please consider the collection systems or
facilities for appropriate recycling.

Notice: The sign Pb below the symbol for batteries indicates

that this battery contains lead.

PC Typical Display Modes

The following table is an illustration of some of the
typical video display modes. Your TV may not support
all resolutions. Your TV supports up to 1920x1200.

Index Resolution Frequency

1 640x400 70Hz

2 640x350 85Hz

3 640x400 85Hz

4 640x480 60Hz

5 640x480 66Hz

6 640x480 72Hz

7 640x480 75Hz

8 640x480 85Hz

9 800x600 56Hz

10 800x600 60Hz

11 800x600 70Hz

12 800x600 72Hz

13 800x600 75Hz

14 800x600 85Hz

15 832x624 75Hz

16 1024x768 60Hz

17 1024x768 66Hz

English - 30 -

18 1024x768 70Hz

19 1024x768 72Hz

20 1024x768 75Hz

21 1024x768 85Hz

22 1152x864 60Hz

23 1152x864 70Hz

24 1152x864 75Hz

25 1152x864 85Hz

26 1152x870 75Hz

27 1280x768 60Hz

28 1360x768 60Hz

29 1280x768 75Hz

30 1280x768 85Hz

31 1280x960 60Hz

32 1280x960 75Hz

33 1280x960 85Hz

34 1280x1024 60Hz

35 1280x1024 75Hz

36 1280x1024 85Hz

37 1400x1050 60Hz

38 1400x1050 75Hz

39 1400x1050 85Hz

40 1440x900 60Hz

41 1440x900 75Hz

42 1600x1200 60Hz

43 1680x1050 60Hz

44 1920x1080 60Hz

45 1920x1200 60Hz

Specications

TV BROADCASTING

PAL/SECAM B/G D/K K’ I/I’ L/L’

DIGITAL RECEPTION

DVB-T MPEG2

DVB-T MPEG4 HD

DVB-T MHEG-5 Engine (for UK only)

DVB-C MPEG2

DVB-C MPEG4 HD

DVB-S / S2 MPEG2

DVB-S / S2 MPEG4 HD

RECEIVING CHANNELS

VHF (BAND I/III)

UHF (BAND U)

HYPERBAND

NUMBER OF PRESET CHANNELS

10000

CHANNEL INDICATOR

On Screen Display

RF AERIAL INPUT

75 Ohm (unbalanced)

OPERATING VOLTAGE

220-240V AC, 50 Hz.

AUDIO

German + Nicam Stereo

AUDIO OUTPUT POWER (W

RMS.

) (10% THD) 2x6

POWER CONSUMPTION (W) 65 W (max)

PANEL

16:9 display, 32” Screen Size

Licence Notications

Manufactured under license from Dolby Laboratories.

TRADEMARK ACKNOWLEDGMENT

and the double-D symbol are

trademarks of Dolby Laboratories.

“DLNA

®

, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certication marks of
the Digital Living Network Alliance.”

“HDMI, the HDMI logo and High-Denition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.”

This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Rovi Corporation. Reverse
engineering and disassembly are prohibited.

English - 31 -

Supported File Formats for USB Media Browser

Media Extension Format Notes

Video Audio

Movie dat, mpg,

mpeg

Mpeg1,2 MPEG1/2 Layer 1/2/3, AAC/HEAAC,

AC3/EAC3, LPCM/ADPCM

1080P@ 30fps 50Mbit/
sec

dat, mpg,
mpeg

MPEG2 ,H.264, VC1, AVS,
MVC

MPEG1/2 Layer 1/2/3, AAC/HEAAC,
AC3/EAC3, LPCM/ADPCM

H.264:1080Px2@25fps
1080P@ 50fps MVC:
1080P@ 24fps Other:
1080P@ 30fps” 50Mbit/
sec

.vob MPEG2 MPEG1/2 Layer 1/2/3, AC3, LPCM 1080P@ 30fps 50Mbit/

sec

.mkv MPEG1,2,4, XviD,

H.264,

VC1,WMV3,

Motion JPEG

MPEG1/2 Layer 1/2/3, AAC/HEAAC,

AC3/EAC3, LPCM,OGG

H.264:1080Px2@25fps
1080P@ 50fps
Other:1080P@ 30fps
50Mbit/sec

.mp4 .mov MPEG1/2 Layer 3, AAC/HEAAC,

AC3/EAC3, LPCM/ADPCM

H.264:
1080Px2@25fps
1080P@ 50fps Other:
1080P@ 30fps 50Mbit/
sec

.avi MPEG1,2,4

Xvid

H.264,

VC1,WMV3,

Sorenson H.263

Motion JPEG

MPEG1/2 Layer 1/2/3, AAC/HEAAC,
AC3/EAC3, LPCM/ADPCM, WMA

H.264:
1080Px2@25fps
1080P@ 50fps Other:
1080P@ 30fps”
50Mbit/sec

v H.264,

Sorenson H.263

MPEG1/2 Layer 3, AAC/HEAAC,
LPCM/ADPCM

H.264: 1080Px2@25fps
1080P@ 50fps Other:
1080P@ 30fps” 50Mbit/
sec

3gp,3g2 MPEG4, H.264 1920x1080 @ 30P

20Mbit/sec

asf, wmv MPEG2,4, XviD, H.264,

VC1,WMV3

MPEG1/2 Layer 1/2/3, AAC/HEAAC,
AC3/EAC3, LPCM, WMA

1080P@ 30fps 50Mbit/
sec

Music .mp3

-

MPEG1 Layer 1/2/3 (MP3)

.wav LPCM

WMA/ASF WMA, WMA Pro

.m4a/ .aac AAC, HEAAC

Photo .jpg .jpeg Baseline JPEG MAX WxH =

14592x12288

Up to 8 MegaByte

.png Progressive JPEG

.bmp non-interlace

.png

interlace

Subtitle

sub - -

srt - -

English - 32 -

Supported DVI Resolutions

When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer
to the following resolution information.

56Hz 60Hz 66Hz 70Hz 72Hz 75Hz

640x400

þ

640x480

þ þ þ þ

800x600

þ þ þ þ þ

832x624

þ

1024x768

þ þ þ þ þ

1152x864

þ þ þ

1152x870

þ

1280x768

þ

1360x768

þ þ

1280x960

þ þ

1280x1024

þ þ

1400x1050

þ þ

1440x900

þ þ

1600x1200

þ

1680x1050

þ

1920x1080

þ

1920x1200

þ

English - 33 -

Media File

Extension

Format Supported

(Maximum resolution/Bit rate etc.)

Video Audio

Movie

.mpg/.dat/.
vob

MPEG1 MPEG Layer

1/2/3

MPEG2 MPEG2

.avi

XviD/3ivx PCM/MP3 XviD Version up to:1.1.2

MPEG4 PCM/MP3

MS ISO

MPEG4

PCM/MP3 Support SP and ASP

Music

- - PCM Sample Rate: 8K ~ 48KHz

.mp3

-

MPEG 1/2

Layer 1/2/3 MP3

Sample Rate: 8K ~ 48KHz, Bit Rate: 64K
~ 320Kbps

Photo

.jpg

Baseline JPEG

W x H = 8902 x 8902 up to 77 Mega-pixel
Support format: 444/ 440/ 422/ 420/ Grayscale

Progressive JPEG Up to 4 Mega-pixel Support format: 444/ 440/

422/ 420/ Grayscale

External

Subtitles

.srt

Support Text File Format, but do not
support
Picture File Format

.smi

.sub

.ssa

.ass

DVD Mode Supported le formats

Compatible disc types

Disc Types

(Logos)

Recording

Types

Disc
Size

Max.

Playing

Time

Characteristics

Audio

+

Video

12cm Single

sided; 240
min.

Double
sided; 480
min.

DVD contains excellent sound and video
due to Dolby Digital and MPEG-2 System.
Various screen and audio functions can
be easily selected through the on screen
menu.

Audio 12cm 74 min. An LP is recorded as an analogue signal

with more distortion. CD is recorded as a
digital signal with better audio quality, less
distortion and less deterioration of audio
quality over time.

Audio

(xxxx.mp3)

12cm Depends on

MP3 quality

MP3 is recorded as a digital signal
with better audio quality, less distortion
and less deterioration of audio quality
over time.

Video

(still

picture)

12cm Depends on

JPG
quality

JPEG is recorded as a digital signal with
better picture quality over time.

For proper operation, only 12 cm discs must be used.

English - 34 -

Appendix: Nero MediaHome Installation

This software is compatible with Windows XP
and Windows 7.

To install Nero MediaHome, please proceed as
follows:

Note: To use DLNA function, this software should be installed
to your PC.

1. Insert the Nero MediaHome installation disc in
your optical disc drive.

• The Nero MultiInstaller screen with a button to start

the installation process will open automatically.

• If below window is not displayed automatically,

double-click on the le SetupX located on the Nero
MediaHome installation disc.

2. Click on the button labeled Nero MediaHome
Essentials to start the installation process.

• The Nero MediaHome installation wizard is

displayed.

• If necessary change installation language from the

language selection menu before continuing.

3. Click the Next button.

• The integrated serial is displayed.

• Please do not change displayed serial.

4. Click the Next button.

• The License Conditions (EULA) screen is displayed.

5. Please read the license agreement carefully
and select the appropriate check box if you
agree to the terms of the agreement. Installation
is not possible without this agreement.

6. Click the Next button.

• The Select Installation Type screen is displayed.

It is possible to choose between Typical, meaning
standard installation, or Custom installation. User
dened installation allows you to determine languages
to be installed and to choose the installation path.

English - 35 -

7. Use Typical installation and click the Next

button.

• The Prerequisites screen is displayed.

The Nero MediaHome installation wizard checks the
availability of required third-party software on your PC.
If applications are missing they are listed and must be
installed before continuing installation.

8. Click the Install button.

• As soon as all prerequisites are installed, the Install
button will change to a Next button.

9. Click the Next button.

• The Ready to Start Installation Process screen
is displayed, installation begins and finishes
automatically. A progress bar informs you of the
progress of the installation process.

10. Installation nishes.

The Help us to Enhance Nero Software screen is
displayed. In order to offer a better service, Nero
is collecting anonymous data to determine which
features are used and what problems, if any, occur.

11. If you would like to help by participating in the
anonymous collection of usage data, select the

check box and click the Next button.

• The final screen of the installation wizard is

displayed.

12. Click the Exit button.

English - 36 -

13. A shortcut called Nero MediaHome 4 is now

placed on your desktop

Congratulations! You successfully installed Nero
MediaHome 4 on your PC.

14. Run Nero MediaHome by pressing shortcut icon.

• Click ADD icon from LOCAL FOLDERS to add the
folder you want to share with the network. Select
the folder that you want to share and click START
SERVER.

15. You can display all media types from the library.

Click Refresh icon to refresh. Click STOP
SERVER icon to stop server.

English - 37 -

Important Instruction

For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.

MAINS (AC) OPERATION

The wires in the mains lead are coloured in accordance with the following code :

IMPORTANT

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured green and yellow must be connected to the terminal which is marked with
the letter E, or by the earth symbol, or coloured green or green and yellow.

The wire which is coloured blue or black must be connected to the terminal which is marked with the
letter N or coloured Black.

The wire which is coloured brown or red must be connected to the terminal which is marked with the
letter L or coloured Red.

For continued protection against risk of re, replace only with same type and rating of fuse (ASTA
approved 5A 250VAC fuse).

CAUTION

TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING
COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

SAFETY PRECAUTION

THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO NOT
ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.

GREEN

&

YELLOW

(Earth)

(if there is earth cable)

FUSE

BROWN

(Live)

BLUE

(Neutral)

50239336

Executive House, Red Cow, Naas Road, Dublin 22

Rebuplic of Ireland

WALKER