Walker 56, 52, 36, 48, 62 User Manual
...
ILLUSTRATED
PARTS MANUAL
Deck and Carrier Frame Assemblies (36”, 42”, 48”, 52”, 56”, 62” & 74”)
Effective Date: P/N 5000-17
07-01-06
KEY TO ABBREVIATIONS USED IN THIS MANUAL
Abbreviation What it Represents
º (Dimension) ....................................................................................................................................Degrees (Angle)
" (Dimension) ....................................................................................................................................................inches
(-) ...................................................................................................................................................Negative (Polarity)
(+).................................................................................................................................................... Positive (Polarity)
AT................................................................................................................................................................ All-Terrain
CCW ..............................................................................................................................................Counter-clockwise
Conn. ..........................................................................................................................................................Connector
CW.............................................................................................................................................................. Clockwise
D ...................................................................................................................................................................Diameter
DGHS......................................................................Deck, Grass Handling System (number refers to size in inches)
DML ............................................................................................... Deck, Mulching (number refers to size in inches)
DSD ..................................................................................... Deck, Side Discharge (number refers to size in inches)
DU................................................................................................................................................... Garlock (Bearing)
ESNA (Fastener)........... ... ...........................................................................................................Nylon Insert Locknut
FSC........................................................................................................................................ Forward Speed Control
GA.....................................................................................................................................................................Gauge
gal. .....................................................................................................................................................................gallon
GHS .......................................................................................................................................Grass Handling System
GR (Fastener)................................................................................................................................................... Grade
HP...........................................................................................................................................................Horse Power
HT .......................................................................................................................................................... Heat-Treated
ID ..............................................................................................................................Identification or Inside Diameter
L....................................................................................................................................................................... Length
LH ..........................................................................................................Left Hand (orientated with operator on seat)
LP...............................................................................................................................................................Low Profile
mm (Dimension).. ... .... ... ... ... ... .... ................................................................................................................ millimeters
MS (Fastener).....................................................................................................................................Machine Screw
NS (as part number)................................................................................... Item is not sold by Walker Manufacturing
OD................................................................................................................................................... Outside Diameter
oz. ......................................................................................................................................................................ounce
PFH (Fastener) ............................................................................................................................... Phillips Flat Head
P/N.......................................................................................................................................... .... ... ... ... ...Part Number
PPH (Fastener).......................................... ... ... .... ... ... .....................................................................Phillips Pan Head
PTH (Fastener) .............................................................................................................................Phillips Truss Head
PTO......................................................................................................................................... .... ... ... ..Power Take-Off
QKS ..........................................................................................................................................................Quick Slide
qt......................................................................................................................................................................... quart
RH....................................................................................................... Right Hand (orientated with operator on seat)
SAE (Fastener) ....................................................................................................... Society of Automotive Eng ine er s
SBH (Fastener).......................................... ... ... .... ... ... ........................................................Socket Button Head (Bolt)
SD.......................................................................................................................................................Side Discharge
SFH (Fastener) ................................................................................................................................Slotted Flat Head
SHC (Fastener)................... ... .........................................................................................................Socket Head Cap
SHL (Fastener) ................................................................................................................................... Shoulder (Bolt)
SM (Fastener).............................................................................................................................Sheet Metal (Screw)
S/N.......................................................................................................................................... .... ... ... ... Serial Number
Spg............................................................................................................................
SQH (Fastener)...................................................................................................................................... Square Head
SS (Fastener).......................................................................................................................................Stainless Steel
ST (Fastener).............................................................................................................................Self-Tapping (Screw)
Term...............................................................................................................................................................Terminal
V...........................................................................................................................................................................Volts
........................................Spring
NOTE: In some instances, combinations of abbreviations may be used (e.g. PPHMS - Phillips Pan Head Machine Screw).
Use only genuine Walker® replacement parts. Effective Date 07-01-06
ILLUSTRATED PARTS LIST
Section of Mower Covered Page Section of Mower Covered Page
Decals & Paint
Deck Decals / Touch-Up Paint ........................ .... ... . 2
Deck and Carrier Frame Assemblies
36 Inch Complete Carrier Frame Assembly ............4
DGHS36 Deck Assembly ............. ...... .... ... ... ... .... ... . 6
DSD36 Deck Assembly ........................................... 8
42 Inch Complete Carrier Frame Assembly ..........10
DGHS42 Deck Assembly ............. ......................... 12
DSD42 Deck Assembly ......................................... 14
DML42A Deck Assembly ...................................... 16
48 Inch Complete Carrier Frame Assembly ..........18
DGHS48 Deck Assembly ............. ......................... 20
DSD48 Deck Assembly ......................................... 22
52 Inch Complete Carrier Frame Assembly ..........24
DSD52 Deck Assembly ......................................... 26
Mulching Kit (For DSD52 Deck Assembly) ...........28
56 Inch Complete Carrier Frame Assembly ..........30
DSD56 Deck Assembly ......................................... 32
62 Inch Complete Carrier Frame Assembly ..........34
DSD62 Deck Assembly ......................................... 36
74 Inch Complete Carrier Frame Assembly ..........38
DSD74 Deck Assembly ......................................... 40
Maintenance
Optional Break-Away Blades ................................ 42
Blade Usage Chart ................................................ 43
Deck Weldment Replacement Parts ..................... 44
Deck Height Adjuster Kit ....................................... 46
Lubrication Points ................................................. 48
Fastener Loctite
Torque Instructions ......................................... 50
Maintenance And Service Record Sheet .............. 52
Deck / Tractor Compatibility Chart ........................ 52
Warranty
Limited Warranty ................................................... 53
®
Application &
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
1
DECK DECALS / TOUCH-UP PAINT
I TEM PAR T D ESC R I P TIO N L OCA TIO N NO . N O.
NO. NO. REQ’D. GHS REQ’D SD
DSD52 And DSD62 Deck Decals
1 8653 Caution, Pivot Joint Carrier Frame 0 2
2 8748 Cutting Height Adjustment Footrest Pulley Guard 0 1
3 8746 Universal Joint Lube Mount Bracket/PTO Guard 0 1
4 5846 Grease Fitting Deck Cover Plate 0 3
5 5808-1 Danger, Rotating Blades Cover Plate (one on each end) 0 2
6 8647 Danger, Tilt-Up Carrier Frame 0 1
7 8653-1 Transport Warning Deck Housing, Front 0 1
8 8732 Decal (52") Deck Housing, Front 0 1
9 5809 Walker Mower Logo (3") Carrier Frame, Front 0 1
10 8734 Drive Belt Routing Underneath Deck Cover Plate 0 1
11 5848 Danger, Side Discharge Shield Side Discharge Shield 0 1
12 5808 Danger, Rotating Blades (62" Deck) Deck Housing (one on each end) 0 2
13 8750 Decal (62") Deck Housing, Front 0 1
14 8749 Drive Belt Routing Underneath Deck Cover Plate 0 1
15 8746-1 Decal, Tele PTO Shaft U-Joint Shaft Assembly 0 1
36", 42", 48" & 56" Deck Decals
1 8653 Caution, Pivot Joint Carrier Frame 2 2
4 5846 Grease Fitting Deck Cover Plate 1 1
6 8647 Danger, Tilt-Up Carrier Frame 1 1
7 8653-1 Transport Warning Deck Housing, Front 0 1
9 5809 Walker Mower Logo (3") Carrier Frame, Front 1 1
11 5848 Danger, Side Discharge Shield Side Discharge Shield 0 1
12 5808 Danger, Rotating Blades Deck Housing (one on each end) 2 2
16 6875 PTO Alignment Arrow Universal Joint Shaft Assembly 1 1
17 5807-3 Cutting Height Adjustment Gearbox Cover 1 1
18 5865 Blade Mounting Torque Carrier Frame 1 1
19 6789 Decal (56") Deck Housing, Front 0 1
DSD74 Deck Decals
1 8653 Caution, Pivot Joint Carrier Frame 0 2
5 5808-1 Danger, Rotating Blades Deck Housing (one on each end) 0 2
6 8647 Danger, Tilt-Up Carrier Frame 0 1
7 8653-1 Transport Warning Deck Housing, Front 0 1
9 5809 Walker Mower Logo (3") Carrier Frame, Front 0 1
11 5848 Danger, Side Discharge Shield Side Discharge Shield 0 1
16 6875 PTO Alignment Arrow Universal Joint Shaft Assembly 0 1
17 5807-3 Cutting Height Adjustment Middle Gearbox Cover 0 1
18 5865 Blade Mounting Torque Carrier Frame 0 1
20 7689 Decal (74") Deck Housing, Front 0 1
Touch-Up Paint
21 5866 Touch-Up Paint, Yellow (12 oz. Aerosol)
NOTE: All parts requiring decals are shipped with decals applied.
Use only genuine Walker® replacement parts. Effective Date 07-01-06
2
DECK DECALS / TOUCH-UP PAINT
11
4
GREASE
E
V
E
58
R
Y
46
25
H
R
S
.
5,12
1
2
15
3
1
10,14
9
4
.
S
R
H
25
Y
846
R
5
E
V
E
GREASE
6
4
5,12
.
S
R
H
25
Y
R
5846
E
V
E
GREASE
8,13
11
18
1
25
VERY
E
GREASE
12
17
7
19
9
6
4
RS.
H
5846
DSD52 & DSD62
1
Deck Assemblies
16
7
12
DSD36, DSD42,
DSD48 & DSD56
Deck Assemblies
11
5
18
16
1
7
9
17
1
6
16
1
18
12
RS.
H
25
VERY
E
ASE
5846
GRE
17
4
20
DSD74
1
Deck Assembly
5
9
21
6
12
DGHS36, DGHS42,
DML42A & DGHS48
Deck Assemblies
Effective Date 07-01-06 Use only genuine Walker® replacement parts.
3
36 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 5710-4)
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Spring and Pivot Mount Components
1 5975-3 Cable Tie (50# x 7") 4
2 5744-1 Spring Clip Bracket 1
3 5743-1 Spring Cover 2
4 8667-10 Pivot Mount, LH/Adj. 1
5 5830-3 Grease Fitting (45 Degree) 4
6 8667-20 Pivot Mount, RH/Adj. 1
7 5743-4 Eyebolt (3/8-16 x 2-3/4) 2
8 5743-6 Extension Spring (1-1/2 7-3/4) 2
(Includes Items # 1, F117 & F166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip (Red) 2
11 8669 Lift Handle 1
12 5748-10 Rubber Mat (1-1/2 x 6) 2
13 5740-2 Deck Pin Bushing (5/8) 4
14 5708-6 36" Carrier Frame (Less Pivots) 1
(Includes Item # 12)
5708-1 36" Carrier Frame w/Forks (Less Pivots)
(Includes Items # 12, 21-23, 25,
F055, F068 & F098)
15 8674-10 Lever, Deck Lock, RH 1
16 5830 Grease Fitting 6
*
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Fasteners
F012 3/8-16 Keps Nut 2
F014 3/8-16 ESNA Nut 2
F020 5/16-18 ESNA Nut 2
F047 3/8-16 x 4-1/2 Hex Bolt 2
F055 5/8 SAE Washer 2
F068 1/8 x 1 Cotter Pin 2
F084 5/16 Wave Spring Washer 2
F098 5/8-18 Slotted Hex Nut 2
F117 Retainer Ring 2
F123 1" External Snap Ring 4
F166 Retainer Ring 2
F226 5/16-18 x 7/8 Hex Bolt 2
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
* Service Part Only
** May be ordered as a factory-installed option or as a kit for
dealer installation. Contact your Walker dealer.
NOTE: When installing Item # 8 on decks prior to S/N DX-62875,
the swivel hook end should be attached to the deck carrier
frame.
Caster Wheel Components
17 5714-7 Bearing Cap 4
18 5714-5 Bearing, Caster Wheel 2
19 5715-4 Caster Wheel, Pneumatic (8 x 3.00-4) 2
(Includes Items # 5,17 & 18)
5715-10 Tire, Pneumatic (8 x 3.00-4)
5715-9 Tire Tube, Pneumatic (2.80/2.50-4) *
5715-3 Caster Wheel & Tire (8 x 3.00-4) **
5715-11 Tire, Caster Wheel/No-Flat (8 x 3.00-4) **
20 5714-3 Axle Spacer Tube 2
21 5770-1 Caster Wheel Fork 2
22 8768-1 Seal (1-3/4 x 1-1/8) 2
23 8037 Bearing, Cone (3/4 ID) 4
24 8769-1 Bearing Cup (1-3/4 x 1-7/16) 4
25 8769-9 Dust Cap 2
*
Use only genuine Walker® replacement parts. Effective Date 07-01-06
4
36 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 5710-4)
1
2
3
7
F336
F317
15
10
14
25
F068
F098
F055
23
24
24
23
22
21
F047
17
20
19
13
16
F123
F226
F084
F020
F012
11
F020
F084
F226
5
18
17
F335
16
F317
12
8
F117
6
5
F014
F317
F166
1
3
7
4
F317
9
10
Refer to DGHS36
DECK ASSEMBLY, Page 6
Refer to DSD36
DECK ASSEMBLY, Page 8
Refer to LUBRICATION POINTS, Page 48.
Effective Date 07-01-06 Use only genuine Walker
®
replacement parts.
5
DGHS36 DECK ASSEMBLY (P/N 5710-15)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619-2 PTO Shaft Guard 1
8618-3 PTO Shaft Guard Assembly
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 24, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-40 Gearbox and Tube Assembly 1
(Includes Items # 12-19, F124, F136,
F179, F211 & F226)
5704-45 Heavy Duty Gearbox and Tube Assembly
(Includes Items # 12-16, 18-20, F136,
F179, F211 & F226)
7 5794 Discharge Chute (6-1/2 Diameter) 1
(Includes Items # 10, 11, F223 & F224)
5794-1 Discharge Chute Assembly with
Spring Mount
(Includes Items # 6, 7, 10, 11, F223 & F224)
8 8678 Spring Mount, Chute 1
9 8677 Extension Spring (1 x 6-1/16) 1
10 5726 Chute Hinge (2 x 8) 1
11 5755 Chute Lower Lip 1
12 6054 Spline Coupling 3
13 P007 Gasket, Cap (Peerless #788030) 4
14 5061 Gearbox Connector Tube (6-11/16) 1
15 6732-2 Connecting Shaft (4-1/8) 1
16 5052-1 Gearbox (LH Rotation) 2
5052-5 Heavy Duty Gearbox (LH Rotation)
17 5706-4 Seal Protector Plate 3
18 5704-1 Gearbox Cover Support 2
19 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear
20 5060 Gearbox Connector Tube (2-5/16) 1
21 5052-3 1.375 x .750 x .187 Washer 4
22 5747-11 Rubber Mat (3 x 6) 2
23 5746-4 36" Gearbox Cover (Includes Item # 22) 1
24 8067-13 Shear Pin w/Cotter (Set of 5)
(Includes Item # F069)
25 5830 Grease Fitting 1
Deck Housing Components
26 8670 Tilt-Up Hook 1
27 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
28 8490 Roller Wheel Axle Bolt 2
29 5710-16 36 GHS Deck Housing 1
(Includes Items # 35 & 36)
30 NS Deck Serial Number Plate 1
31 5705-0 Blade, 20" (RH Rotation) 1
*
**
*
**
**
*
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
32 5705-2 Blade, 20" (LH Rotation) 1
5705-6 36 GHS Blade Set W/Hubs *
(Includes Items # 31-33, F002 & F202)
33 5706 Blade Hub & Trash Guard 2
34 7775-1 Hitch Pin, LH (Silver) #6 2
35 8735-10 Rubber Mat (5 x 6) 2
36 8788-1 Rubber Mat (1 x 2) 1
37 7775-2 Hitch Pin, RH (Gold) #6 2
38 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 9
F004 1/4-20 Keps Nut 2
F005 1/4-20 ESNA Nut 2
F013 3/8-16 Whiz Locknut 6
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F036 1/4-20 x 1/2 SBH Screw 2
F038 3/8-16 x 1 Hex Bolt 4
F039 3/8-16 x 1-1/4 Hex Bolt 4
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 2
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw
F087 #10 x 7/8 Fender Washer 2
F124 10-32 x 3/8 Taptite Machine Screw 9
F129 10-24 x 1/2 PTHMS 3
F136 AN960C416L Washer 16
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 16
F223 3/16 x 5/16 Semi-Tube Rivet
F224 3/16 x 7/16 Semi-Tube Rivet *
F229 C-Clip (13/16) 2
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
4***
***
*
*
* Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchangeable with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD and MC.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS and MB.
Use only genuine Walker® replacement parts. Effective Date 07-01-06
6
DGHS36 DECK ASSEMBLY (P/N 5710-15)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
15
F002
F069
13
27
16
1
F136
28
2
F050
F029
F295
F211
Refer to 36 INCH
CARRIER FRAME ASSEMBLY,
Page 4
6
4
F076
3
9
8
F002
F129
F223
F224
18
F005
17
10
F124
F036
11
14
13
F229
12
27
F059
5
F002
7
F087
18
F136
F179
F025
24
25
19
12
F229
F246
F050
23
F039
21
16
F013
13
20
13
38
22
12
F004
26
F403
F013
37
35
36
35
F002
F055
F056
F018
34
F202
21
32
32
F278
33
F038
31
29
F206
30
Hardware Used on
Heavy Duty Gearboxes
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
Refer to LUBRICATION POINTS, Page 48.
Effective Date 07-01-06 Use only genuine Walker
®
replacement parts.
7
DSD36 DECK ASSEMBLY (P/N 5710-17)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619-2 PTO Shaft Guard 1
8618-3 PTO Shaft Guard Assembly
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 21, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-43 Gearbox and Tube Assembly 1
(Includes Items # 7-16, F124,
F136, F179 & F211)
5704-46 Heavy Duty Gearbox and Tube Assembly
(Includes Items # 7, 9-16, F136,
F179 & F211)
7 5704-1 Gearbox Cover Support 2
8 5706-4 Seal Protector Plate 3
9 6054 Spline Coupling 3
10 P007 Gasket, Cap (Peerless #788030) 4
11 5061 Gearbox Connector Tube (6-11/16) 1
12 6732-2 Connecting Shaft (4-1/8) 1
13 5052-1 Gearbox (LH Rotation) 1
5052-5 Heavy Duty Gearbox (LH Rotation)
14 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear
15 5060 Gearbox Connector Tube (2-5/16) 1
16 5053-1 Gearbox (RH Rotation) 1
5053-5 Heavy Duty Gearbox (RH Rotation)
17 5052-3 1.375 x .750 x .187 Washer 4
18 5747-11 Rubber Mat (3 x 6) 2
19 5746-4 36" Gearbox Cover 1
(Includes Item # 18)
20 5830 Grease Fitting 1
21 8067-13 Shear Pin w/Cotter (Set of 5)
(Includes Item # F069)
Deck Housing Components
22 8670 Tilt-Up Hook 1
23 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
24 8490 Roller Wheel Axle Bolt 2
25 5710-18 36 SD Deck Housing 1
(Includes Items # 23, 24, 29 & 31)
26 NS Deck Serial Number Plate 1
27 5705-1 Blade, 20" (RH Rotation) 2
5705-5 36 SD Blade Set W/Hubs
(Includes Items # 27, 28, F002 & F202)
*
**
**
**
**
*
*
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
28 5706 Blade Hub & Trash Guard 2
29 8735-10 Rubber Mat (5 x 6) 2
30 7775-1 Hitch Pin, LH (Silver) #6 2
31 8788-1 Rubber Mat (1 x 2) 1
32 7775-2 Hitch Pin, RH (Gold) #6 2
33 5709-2 36/42 SD Discharge Shield 1
34 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 6
F004 1/4-20 Keps Nut 2
F013 3/8-16 Whiz Locknut 6
F014 3/8-16 ESNA Nut 2
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F038 3/8-16 x 1 Hex Bolt 4
F039 3/8-16 x 1-1/4 Hex Bolt 6
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 4
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw
F124 10-32 x 3/8 Taptite Machine Screw 9
F136 AN960C416L Washer 20
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 16
F229 C-Clip (13/16) 2
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
4***
***
*
* Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchangeable with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD, MC and MW.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS and MB.
Use only genuine Walker® replacement parts. Effective Date 07-01-06
8
DSD36 DECK ASSEMBLY (P/N 5710-17)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
F039
21
20
12
F002
10
23
1
F136
2
F050
F029
F295
F069
F211
24
Refer to 36 INCH
CARRIER FRAME ASSEMBLY,
Page 4
4
F076
3
7
13
8
F124
11
10
F229
23
9
F059
5
6
F025
F246
19
F050
F039
17
16
F013
10
15
10
9
33
F014
34
18
F004
22
F403
F136
F179
7
14
9
F229
F013
32
F059
29
31
28
27
F002
F055
F056
F018
F202
30
29
28
17
F278
F038
27
25
F206
26
Hardware Used on
Heavy Duty Gearboxes
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
Refer to LUBRICATION POINTS, Page 48.
Effective Date 07-01-06 Use only genuine Walker
®
replacement parts.
9
42 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 5700-11)
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Spring and Pivot Mount Components
1 5975-3 Cable Tie (50# x 7") 4
2 5744-1 Spring Clip Bracket 1
3 5743-1 Spring Cover 2
4 5743-3 Eyebolt (3/8-16 x 2) 2
5 8667-10 Pivot Mount, LH/Adj. 1
6 8667-20 Pivot Mount, RH/Adj. 1
7 5830-3 Grease Fitting (45 Degree) 4
8 5743-6 Extension Spring (1-1/2 x 7-3/4) 2
(Includes Items # 1, F117 & F166)
Carrier Frame Components
9 8674-11 Lever, Deck Lock, LH 1
10 7406-1 Handle Grip (Red) 2
11 8669 Lift Handle 1
12 5748-10 Rubber Mat (1-1/2 x 6) 2
13 5740-2 Deck Pin Bushing (5/8) 4
14 8660-13 42" Carrier Frame (Less Pivots) 1
(Includes Item # 12)
8660-12 42" Carrier Frame w/Forks (Less Pivots)
(Includes Items # 12, 21-23, 25,
F055, F068 & F098)
15 8674-10 Lever, Deck Lock, RH 1
16 5830 Grease Fitting 6
*
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Fasteners
F012 3/8-16 Keps Nut 2
F014 3/8-16 ESNA Nut 2
F020 5/16-18 ESNA Nut 2
F047 3/8-16 x 4-1/2 Hex Bolt 2
F055 5/8 SAE Washer 2
F068 1/8 x 1 Cotter Pin 2
F084 5/16 Wave Spring Washer 2
F098 5/8-18 Slotted Hex Nut 2
F117 Retainer Ring 2
F123 1" External Snap Ring 4
F166 Retainer Ring 2
F226 5/16-18 x 7/8 Hex Bolt 2
F317 3/16 x 1 Split Spring Pin 4
F335 3/8-16 x 7/8 Set Screw, SS 2
F336 3/8-16 Jam Nut 2
* Service Part Only
** May be ordered as a factory-installed option or as a kit for
dealer installation. Contact your Walker dealer.
NOTE: When installing Item # 8 on decks prior to S/N DX-62875,
the swivel hook end should be attached to the deck carrier
frame.
Caster Wheel Components
17 5714-7 Bearing Cap 4
18 5714-5 Bearing, Caster Wheel 2
19 5715-4 Caster Wheel, Pneumatic (8 x 3.00-4) 2
(Includes Items # 7, 17 & 18)
5715-10 Tire, Pneumatic (8 x 3.00-4)
5715-9 Tire Tube, Pneumatic (2.80/2.50-4) *
5715-3 Caster Wheel & Tire (8 x 3.00-4) **
5715-11 Tire, Caster Wheel/No-Flat (8 x 3.00-4) **
20 5714-3 Axle Spacer Tube 2
21 5770-1 Caster Wheel Fork 2
22 8768-1 Seal (1-3/4 x 1-1/8) 2
23 8037 Bearing, Cone (3/4 ID) 4
24 8769-1 Bearing Cup (1-3/4 x 1-7/16) 4
25 8769-9 Dust Cap 2
*
Use only genuine Walker® replacement parts. Effective Date 07-01-06
10
42 INCH COMPLETE CARRIER FRAME ASSEMBLY (P/N 5700-11)
1
F317
8
F117
F335
7
2
F166
1
3
6
4
5
F317
9
10
3
F317
15
10
14
25
F068
F098
F055
23
24
24
23
22
21
F047
17
20
19
13
16
F226
F123
F084
F020
F020
F084
F012
11
7
18
17
16
12
F226
F336
4
F014
F317
Refer to DGHS42
DECK ASSEMBLY,
Page 12
Refer to DSD42
DECK ASSEMBLY,
Page 14
Refer to LUBRICATION POINTS, Page 48.
Effective Date 07-01-06 Use only genuine Walker
®
replacement parts.
11
DGHS42 DECK ASSEMBLY (P/N 5705)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 26, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-50 Gearbox and Tube Assembly 1
(Includes Items # 12-21, F124, F136,
F179 & F211)
5704-8 Heavy Duty Gearbox and Tube Assembly
(Includes Items # 12-16, 18-21, F136,
F179 & F211)
7 5794 Discharge Chute (6-1/2 Diameter) 1
(Includes Items # 9, 11, F223 & F224)
5794-1 Discharge Chute Assembly with
Spring Mount
(Includes Items # 6, 7, 10, 11, F223 & F224)
8 8678 Spring Mount, Chute 1
9 8677 Extension Spring (1 x 6-1/16) 1
10 5726 Chute Hinge (2 x 8) 1
11 5755 Chute Lower Lip 1
12 6054 Spline Coupling 4
13 P007 Gasket, Cap (Peerless #788030) 4
14 5063 Gearbox Connector Tube (8-5/8) 1
15 6732-3 Connecting Shaft (6-1/4) 1
16 5052-1 Gearbox (LH Rotation) 2
5052-5 Heavy Duty Gearbox (LH Rotation)
17 5706-4 Seal Protector Plate 2
18 5704-1 Gearbox Cover Support 2
19 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear
20 6732-1 Connecting Shaft (2") 1
21 5062 Gearbox Connector Tube (4-3/8) 1
22 5052-3 1.375 x .750 x .187 Washer 4
23 5747-11 Rubber Mat (3 x 6) 2
24 5785-5 42" Gearbox Cover (Includes Item # 23) 1
25 5830 Grease Fitting 1
26 8067-13 Shear Pin w/Cotter (Set of 5)
(Includes Item # F069)
Deck Housing Components
27 8670 Tilt-Up Hook 1
28 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
29 8490 Roller Wheel Axle Bolt 2
30 NS Deck Serial Number Plate 1
31 5705-3 Blade, 22" (RH Rotation) 1
32 5706 Blade Hub & Trash Guard 2
*
**
*
**
**
*
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
33 5705-4 Blade, 22" (LH Rotation) 1
5705-8 42 GHS Blade Set with Hubs
(Includes Items # 31-33, F002 & F202)
34 8735-10 Rubber Mat (5 x 6) 2
35 7775-1 Hitch Pin, LH (Silver) #6 2
36 8788-1 Rubber Mat (1 x 2) 1
37 5704-4 42 GHS Deck Housing 1
(Includes Items # 34 & 36)
38 7775-2 Hitch Pin, RH (Gold) #6 2
39 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 9
F004 1/4-20 Keps Nut 2
F005 1/4-20 ESNA Nut 2
F013 3/8-16 Whiz Locknut 6
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F036 1/4-20 x 1/2 SBH Screw 2
F038 3/8-16 x 1 Hex Bolt 4
F039 3/8-16 x 1-1/4 Hex Bolt 4
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 2
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw
F087 #10 x 7/8 Fender Washer 2
F124 10-32 x 3/8 Taptite Machine Screw 6
F129 10-24 x 1/2 PTHMS 3
F136 AN960C416L Washer 20
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 16
F223 3/16 x 5/16 Semi-Tube Rivet
F224 3/16 x 7/16 Semi-Tube Rivet *
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
*
***
*
*
***
* Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchangeable with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD and MC.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS.
Use only genuine Walker® replacement parts. Effective Date 07-01-06
12
DGHS42 DECK ASSEMBLY (P/N 5705)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
F246
F050
24
23
22
16
12
F229
13
21
38
F013
13
20
F229
12
39
F039
F004
F403
18
F179
27
F136
F025
12
19
F229
F013
1
2
F050
F029
F002
3
26
F295
25
18
F069
16
15
13
28
F136
29
F211
17
F124
14
13
28
F059
10
F036
F229
F013
4
F002
9
F129
F005
11
F224
12
Refer to 42 INCH
CARRIER FRAME ASSEMBLY,
Page 10
F076
5
F002
8
F223
6
7
F087
34
37
36
34
35
32
F002
F055
F056
F018
F202
F206
33
32
22
F278
F038
31
30
Hardware Used on
Heavy Duty Gearboxes
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
Refer to LUBRICATION POINTS, Page 48.
Effective Date 07-01-06 Use only genuine Walker
®
replacement parts.
13
DSD42 DECK ASSEMBLY (P/N 5707-10)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
Gearbox and Drive Components
1 8618-1 Cover, PTO Shaft Guard 1
2 8619 PTO Shaft Guard 1
8618 PTO Shaft Guard Assembly
(Includes Items # 1, 2, F002 & F025)
3 5285-15 U-Joint Shaft Assy, 90 Degree, Spline 1
(Includes Items # 22, F069 & F295)
4 7275-16 U-Joint Tube Assy, Spline 1
5 5275-15 U-Joint Tube Assy (9.5" OAL), Spline 1
(Includes Item # F076)
6 5704-51 Gearbox and Tube Assembly 1
(Includes Items # 7-17, F124, F136,
F179 & F211)
5704-54 Heavy Duty Gearbox and Tube Assembly
(Includes Items # 8-17, F136, F179 & F211)
7 5706-4 Seal Protector Plate 3
8 6054 Spline Coupling 4
9 P007 Gasket, Cap (Peerless #788030) 4
10 5063 Gearbox Connector Tube (8-5/8) 1
11 6732-3 Connecting Shaft (6-1/4) 1
12 5052-1 Gearbox (LH Rotation) 1
5052-5 Heavy Duty Gearbox (LH Rotation)
13 5704-1 Gearbox Cover Support 2
14 5051-16 Tee Gearbox, Shear 1
5051-6 Heavy Duty Tee Gearbox, Shear
15 6732-1 Connecting Shaft (2") 1
16 5062 Gearbox Connector Tube (4-3/8) 1
17 5053-1 Gearbox (RH Rotation) 1
5053-5 Heavy Duty Gearbox (RH Rotation)
18 5052-3 1.375 x .750 x .187 Washer 4
19 5747-11 Rubber Mat (3 x 6) 2
20 5785-5 42" Gearbox Cover 1
(Includes Item # 19)
21 5830 Grease Fitting 1
22 8067-13 Shear Pin w/Cotter (Set of 5)
(Includes Item # F069)
Deck Housing Components
23 8670 Tilt-Up Hook 1
24 5162-11 Roller Wheel (5" Poly) 2
(Includes Item # F059)
25 8490 Roller Wheel Axle Bolt 2
26 NS Deck Serial Number Plate 1
27 5705-3 Blade, 22" (RH Rotation) 2
5705-7 42 SD Blade Set with Hubs
(Includes Items # 27, 28, F002 & F202)
28 5706 Blade Hub & Trash Guard 2
29 7775-1 Hitch Pin, LH (Silver) #6 2
*
**
**
**
**
*
*
ITEM PART DESCRIPTION NO.
NO. NO. REQ’D
30 8735-10 Rubber Mat (5 x 6) 2
31 8788-1 Rubber Mat (1 x 2) 1
32 5703-3 42 SD Deck Housing 1
(Includes Items # 30 & 31)
33 7775-2 Hitch Pin, RH (Gold) #6 2
34 5709-2 36/42 Discharge Shield 1
35 5727-1 Washer Shim (5/8 ID) 4
Fasteners
F002 10-24 Keps Nut 6
F004 1/4-20 Keps Nut 2
F013 3/8-16 Whiz Locknut 6
F014 3/8-16 ESNA Nut 2
F018 5/8-18 Hex Nut 2
F025 10-24 x 3/8 PPHMS 2
F029 1/4-20 x 1/2 Hex Bolt 2
F038 3/8-16 x 1 Hex Bolt 4
F039 3/8-16 x 1-1/4 Hex Bolt 6
F050 1/4 SAE Washer 4
F055 5/8 SAE Washer 2
F056 5/8 Split Lock Washer 2
F059 3/8 Wave Spring Washer 4
F069 3/32 x 1/2 Cotter Pin 1
F076 3/8-16 x 5/8 SQH Set Screw
F124 10-32 x 3/8 Taptite Machine Screw 9
F136 AN960C416L Washer 20
F179 1/4-20 x 1 Hex Bolt 4
F202 10-24 x 5/8 SHC Screw, GR5 SS 4
F206 #2 x 3/16 Drive Pin 2
F211 1/4-20 x 7/8 Hex Bolt 16
F229 C-Clip (13/16) 4
F246 1/4-20 x 1/2 PTHMS 2
F278 3/8 Split Lock Washer 4
F295 3/16 x 1-1/2 Split Spring Pin 1
F403 1/4-20 x 1/2 PTHMS SS 2
***
*
***
* Service Part Only
** Item(s) used on the Heavy Duty version of standard gear-
boxes. The Heavy Duty cast iron gearboxes are interchangeable with Standard aluminum gearboxes.
*** Used on Heavy Duty gearbox configuration.
NOTE: Order Item # 4 to use the splined deck PTO shaft with
Model MT, MD, MC and MW.
NOTE: Order Item # 5 to use the splined deck PTO shaft with
Model MS and MB.
Use only genuine Walker® replacement parts. Effective Date 07-01-06
14
DSD42 DECK ASSEMBLY (P/N 5707-10)
INCL. OPTIONAL HEAVY DUTY GEARBOXES
F039
F246
F050
20
19
18
17
F013
8
F229
9
16
9
35
F014
34
F059
33
30
32
31
28
F002
F055
F056
F018
F039
13
F179
15
F229
8
F004
23
F403
30
29
F136
F202
F025
8
27
14
F229
F013
28
22
21
F069
12
11
1
2
F050
F029
F002
3
F295
13
7
F124
9
F136
F211
24
18
F278
F038
10
25
Hardware Used on
Heavy Duty Gearboxes
27
26
9
24
F059
F229
F013
F206
4
8
F076
Refer to FASTENER LOCTITE APPLICATION &
TORQUE INSTRUCTIONS, Page 50.
Refer to LUBRICATION POINTS, Page 48.
Refer to 42 INCH
CARRIER FRAME ASSEMBLY,
Page 10
5
6
Effective Date 07-01-06 Use only genuine Walker
®
replacement parts.
15
Loading...