WalimeXPro LED 500 Instruction Manual
1
Copy of Instruction Manual
LED 500 Fluorescent Light
Gewerbering 26
86666 Burgheim
Tel. +49/84 32 / 9489-0
Fax: +49/84 32 / 9489 - 8333
eMail:
info@foto-walser.de
www.foto-walser.de
2
Content
1. How to understand the instruction manual .................................................... 4
1.1 Markings on the device .......................................................................................... 4
1.2 Markings in this manual ......................................................................................... 4
2. Important safety notes .................................................................................. 4
3. Unpack and check the device ......................................................................... 6
4. Overview about the parts .............................................................................. 7
5. Quick start guide ........................................................................................... 7
6. Preparation for operation .............................................................................. 7
6.1 Mount on tripod (optional) .................................................................................... 7
6.2 Connect to power supply ....................................................................................... 8
7. Operation of the device ................................................................................. 8
7.1 Adjust tilt angle ...................................................................................................... 8
7.2 Switch device on and off ........................................................................................ 8
7.3 Switch lamps on and off ......................................................................................... 8
8. Transportation and storage ............................................................................ 8
9. Solve problems .............................................................................................. 9
10. Maintenance ................................................................................................. 9
10.1 Continuous inspections .......................................................................................... 9
10.2 Cleaning .................................................................................................................. 9
10.3 Change lamps ....................................................................................................... 10
10.4 Change micro-fuse................................................................................................ 10
11. Accessories and options ................................................................................10
12. Spare parts ...................................................................................................10
13. Disposal and environment protection ...........................................................11
14. Technical specifications ................................................................................11
3
Thank you very much for your confidence. We wish you much pleasure and success with your new
device.
The LED 500 Fluorescent Light is equipped with long-living, energy-saving LED. The Light is especially
developed for ambitious beginners and professional users in film and studio photography. It is
characterized through its longevity, stable colour temperature and constant luminance (without
flickering).
The barndoors provide a rectangular illumination, cover large projecting area and distribution without
shadow effect. An electronic ballast guarantees high power efficiency. The body of the Fluorescent
Light is attractive in its appearance and made up of aluminium alloy. The Fluorescent Light is the right
choice for you, also because of its security and compatibilty!
The main features of your device as follows:
− stable light with constant colour temperature
− sturdy aluminium/metal housing
− rotatable and tiltable socket, which fits on every common lamp tripod
− low heat development
− low energy demand
− long service life
− vertical and horizontal usage possible
− Please read these instructions carefully before using your device for the first time. It includes
everything you need to know to avoid physical injuries and damages.
− Please pay attention to all safety notes in this instruction manual.
− Please keep this manual safe. In case of selling or leaving the device to other persons, please
don´t forget to hand this manual over as well.
4
1. How to understand the instruction manual
1.1 Markings on the device
This marking means, that your device meets the safety requirements of all
relevant European Directives.
This marking means, that your device should be disposed in the local
disposal points.
1.2 Markings in this manual
Marking Meaning
Indicates the handling and consequences of safety
notes.
WARNING Indicates a hazardous situation, which, if not
avoided, could result in a serious injury or death.
CAUTION Indicates a hazardous situation, which, if not
avoided, may result in minor or moderate injury.
ADVICE
: Indicates potentially physical damages and other
important information in connection with your
device.
2. Important safety notes
WARNING
The optical radiation of the lamps could blind your eyes and lead to afterimages, if persons and
animals look into the lamp directly. This could lead to injuries. Please avoid persons and animals
looking into the flash directly.
WARNING
Danger of crashing, entrapment and fire through the falling down of the device
The weight of the device is approx. 3kg.
− Make sure, that the device is always positioned tilt and skid resistant and stored securely.
− Keep out of reach of children and animal. They could overturn the device.
− Avoid placing cables where they can be tripped over. The device could be overturned.
WARNING
Danger of electric shock, burn hazard
Please note, that the device is still connected with the supply voltage even if it is switched off. Just
after disconnecting the device from the power supply through pulling out the power cable, the
device is actually de-energized.
− Switch off your device when it is not in use.
− Switch off your device before mounting and maintenance and disconnect from power supply.
− Protect your device against unintended switching-on.
− Unplug the power cord, if the flash is not in use for a long time.
Loading...