Waldi Leuchten 65271.0 User guide

Ceiling lamp 3-lights „Football“

Dear Client,

Congratulations o n buying a ligh t produced by WAL DI and you made a good choice! Nevertheless, for your own securit y we recommend to
carefully read this manual .

Instruction for installation:

1. The lig ht is provided for a ceiling-mounting in dry rooms .

2. The lig ht is provided for a permanent mounting. It may be fastened on normal infl ammable sur faces.

3. We recommend to ask a t rained electrici an to perform t he connection (V DE 0100).

4. When mounting the light, make sure that the power cord is stress free (switc h “out”, fuse “out”).

Installation:

1. Take the enc losed acryl glasses out of the ca rton package.

2. push the acryl glasses in the in tended sidewise slots on the spots (fi g4).
please take care t hat the acryl glass is snap fi xed (the little burls have to loo k towards in the front) .

3. After you completed the connec tion, put the supplied cover on the luster terminals . Then position the terminal on the pi n inside the lamp (Fig . 1).

4. Should th ere be a protect ion wire at-si te, insulate it approp riately (F ig. 1).

5. The light is fi xed by screws, if necessa ry use dowels (not pa rt of the delive ry).
After the light is mounted, take the protective caps out of the polybag and press them into t he two holes.

6. Be sure not to squash the lines when mou nting.

General informations:

1. Please note the minimum distance between the lamp and the fl oodlit surfa ce marked on the li ght. The distance is 0, 5 m and has to
be obser ved because of possible fi re risk . (Fig. 2)

2. Only use the lamp indicated on the light ( Fig.3)

3. The light serves on ly for decoration and is not sui ted as a child’s toy.

4. For safet y reasons no other decoration p arts should be fastened to the ceili ng light.

5. For cleaning the l ight we recommend to use a dr y or slightly damp cloth. Pay attention not to penetrate with the cloth inside the socket.
Before cleaning switch of f the light! When using a sligh tly damp cloth, you have to dry the light before switching it on again.

6. Please keep the manual for later communication purposes.

The manufacturer shall not be liable for injuries or damage which are a result of the incorrect use or connection of the lamp.
In the case of doubt, please consult a qualifi ed electrician.

Art.-No.: 65271.0

min. 0, 5m

Safe ty catego ry II L: blac k or brown

N: blue

lamp

R50

max. 4 0W/E14

or

Energ y Saver

R50

max. 9 W/E14

®

Waldi-Leuchten GmbH - Am Güterbahnhof 2 - D-31303 Burgdorf - Tel. [phone] - 809830

2006/95/EC
2004/108/EC 05/11

Fig. 1

Example Fig.2 Fig. 3 Fig. 4