Wald D584, 675 Assembly Instructions Manual
WALD QUICK RELEASE
WALD QUICK RELEASE
BICYCLE BASKET
with handle & mounting holder
• NO TOOLS REQUIRED, QUICK ATTACHMENT TO BIKE
• BASKET EASILY REMOVED FOR CARRYING
• SIZED FOR GROCERY BAG & MANY OTHER USES
• RUST RESISTANT DURABLE FINISH
• FITS MOST HANDLEBARS, EXCEPT RACING STYLE
BICYCLE BASKET
with handle & mounting holder
• NO TOOLS REQUIRED, QUICK ATTACHMENT TO BIKE
• BASKET EASILY REMOVED FOR CARRYING
• SIZED FOR GROCERY BAG & MANY OTHER USES
• RUST RESISTANT DURABLE FINISH
• FITS MOST HANDLEBARS, EXCEPT RACING STYLE
B
C
ASSEMBLY INSTRUCTIONS ON OTHER SIDE
PAT. D584,675
WARNINGS :
!
•
DO NOT
Overloading basket may
cause difficulty in steering
and/or loss of bicycle control
which could result in injury.
• Make sure hooks of mounting
holder are securely down
against top of handlebar.
Mfgr.No.133WH (White)
Made in U.S.A. by Wald
overload basket.
C
2009 Wald LLC
Rev.C 3/18/2009
PAT. D584,675
ASSEMBLY INSTRUCTIONS ON OTHER SIDE
WALD QUICK RELEASE
WALD QUICK RELEASE
BICYCLE BASKET
with handle & mounting holder
SLOT
LOCK END
MOUNTING
HOLDER
SPIRAL WRAP
BICYCLE BASKET
with handle & mounting holder
LOCK END
MOUNTING
HOLDER
A
PAT. D584,675
ASSEMBLY INSTRUCTIONS
• Apply spiral wrap to holder by unwinding one end and
wrapping it on holder as shown.
• Center and place large hooks of mounting holder over
handlebar.
securely down against top of handlebar.
• Hold basket so lock end of handle is toward holder.
• Center and insert bottom basket wire over bottom
hooks of holder.
• Raise handle upright and insert lock end of handle
through slot at top of holder.
• Lay handle flat to lock.
Make sure hooks of mounting holder are
TO REMOVE BASKET FROM HOLDER
• Raise basket handle upright.
• Pull away from holder and lift basket from bottom
hooks of holder.
PAT. D584,675
ASSEMBLY INSTRUCTIONS
• Apply spiral wrap to holder by unwinding one end and
wrapping it on holder as shown.
• Center and place large hooks of mounting holder over
handlebar. Make sure hooks of mounting holder are
securely down against top of handlebar.
• Hold basket so lock end of handle is toward holder.
• Center and insert bottom basket wire over bottom
hooks of holder.
• Raise handle upright and insert lock end of handle
through slot at top of holder.
• Lay handle flat to lock.
TO REMOVE BASKET FROM HOLDER
• Raise basket handle upright.
• Pull away from holder and lift basket from bottom
hooks of holder.
Mfgr.No.133WH (White)
Mfgr.No.133WH (White)
Loading...