Wahl ZX841 User Manual

James Martin Table Blender

Table Blender

ZX841

Safety rst

Never touch the blades while the appliance is plugged in.

Always read your instructions before using for the rst time.

1

James Martin Table Blender

Please read all instructions carefully to familiarize yourself with the

Wahl James Martin Table Blender before using.

THIS TABLE BLENDER IS INTENDED FOR HOUSEHOLD USE ONLY.

Save these instructions for further reference.

For any further assistance or information call customer services on

INDEX

T: 01227 740066

or visit

W: www.wahl.co.uk

E: [e-mail]

DESCRIPTION OF PARTS Page 3
IMPORTANT SAFEGUARDS Page 4
HOW TO USE Page 5
CLEANING AND MAINTENANCE Page 8
RECIPES Page 10
WIRING Page 14
PRODUCT REGISTRATION Page 15
GUARANTEE Page 15

2

DESCRPITION OF PARTS

A: Measuring Cup
B: Lid
C: Glass Jug
D: Handle
E: Rubber Seal
F: Blade
G: Blade Housing
H: Main Body
I: Speed Control Dial
J: Grinder Attachment

James Martin Table Blender

A.

B.

C.

D.

E.

F.

G.

H.

J.

I.

3

James Martin Table Blender

IMPORTANT SAFEGUARDS

When using this electrical appliance, especially when children are present, basic
safety precautions should always be observed including the following.

TO REDUCE THE RISK OF FIRE AND INJURY

1. This appliance is not intended for use by persons (including
children)with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they do
not play with the appliance.

2. Never touch or allow contact with moving parts while in
motion. Keep hands, hair clothing and other utensils away
from the moving parts during operation to prevent accident,
injury or damage to the appliance.

3. Switch off the appliance and unplug from outlet when not
in use, before putting on or taking off attachments and also
before cleaning the appliance.

4. Never use your appliance without paying attention! Always
unplug the unit when not in use, even for a moment.

5. Do not operate the appliance with a broken cord or plug, or
if the appliance malfunctions, or is dropped or damaged in
anyway.

6. Any servicing or repair must be performed by an authorized
service representative.

7. Do not use outdoors or in damp areas.

8. Do not let the cord hang over the edge of the work surface
or let it touch any hot surfaces.

9. The use of attachments that are not supplied by the
manufacturer may cause fire, electric shock or injury and
damage to the appliance.

10.To protect against risk of electrical shock, never immerse
the unit or let it come into contact with water or any other
liquids. Do not use the unit with wet hands. If the appliance
should become wet, damp or fall in water, remove plug
from mains socket immediately. Do not put your
hands in the water.

4

James Martin Table Blender

11.Never carry the unit by its power cord.

12.Use this appliance only for its intended purpose.

INSTALLATION

1. Remove all packaging and clean the jug, measuring cup and lid
thoroughly before using for the first time. Only clean the main unit with
a damp cloth. Never immerse the unit in water or place under running
water. See cleaning & storage section page 8 for full cleaning
instructions.
The blender should be placed on flat surface before operation.

WARNING: THE BLADE IS VERY SHARP. WASH WITH CARE AND
NEVER TOUCH THE BLADE WITH YOUR FINGERS.

2. Do not plug in the appliance before assembling.

3. Place the appliance on a flat surface.

4. Place the glass jug on to the motor unit and lock into place by turning
clockwise.

5. Put the lid on top of the jug and push it down. Insert the measuring cup
into the cover and turn until it locks into place.

6. Make sure the appliance is turned off before plugging in.

HOW TO USE

1. Before plugging in ensure that the mains voltage matches that shown
on the rating label.

2. This unit has a safety design, it will not work if the jug is not installed
onto the main body properly.

3. Turn the control dial to position 0 in order to make sure the unit is
turned off.

4. Place ingredients into the jug, do not exceed the maximum 1.5L
capacity.

IMPORTANT: Do not operate with out any ingredients.

5. Put the cover on top of the jug ensuring it is fitted correctly.

6. Turn the control dial clockwise to your desired speed as you need, or
use the pulse function by turning the dial anti-clockwise.

IMPORTANT: Do not open the lid while the blender is working.

5