WAGO WAGO-PERSPECTO 762-3104/000-001, WAGO-PERSPECTO 762 Series, PERSPECTO WP 35 QVGA 762-1035, PERSPECTO 762-3057 User Manual

Pos: 2 /Dokumentation allgemein/Einband/Einband Handbuch - Deckblatt ohne Variantenfeld (Standard) @ 9\mod_ 1285 229289866_0.doc @ 64941 @ @ 1

Manual

WAGO-PERSPECTO® 762

CP 104 VGA TV

762-3104/000-001

PERSPECTO® CP, Control Panel with CoDeSys

Target Visualisation

Version 1.0.1

Pos: 3 /Alle Serien (Allgemeine Module)/Hinweise zur D oku mentation/Impressum für Standardhandbücher - allg. Anga ben, Anschriften, Telefonnummern und E-Mail-Adr essen @ 3\mod_1219151118203_21.doc @ 21060 @ @ 1

2 WAGO-PERSPECTO® 762
762-3104/000-001 CP 104 VGA TV

© 2012 by WAGO Kontakttechnik GmbH & Co. KG
All rights reserved.

WAGO Kontakttechnik GmbH & Co. KG

Hansastraße 27
D-32423 Minden

Phone: [phone] – 0
Fax: [phone] – 1 69

E-Mail: [e-mail]
Web: http://www.wago.com

=== Ende der Liste für Textmarke Einband_vorne ===

Technical Support

Phone: [phone] – 5 55
Fax: [phone] – 85 55

E-Mail: [e-mail]

Every conceivable measure has been taken to ensure the accuracy and
completeness of this documentation. However, as errors can never be fully
excluded, we always appreciate any information or suggestions for improving the
documentation.

E-Mail: [e-mail]
We wish to point out that the software and hardware terms as well as the

trademarks of companies used and/or mentioned in the present manual are
generally protected by trademark or patent.

Manual
Version 1.0.1

WAGO-PERSPECTO® 762 Table of Contents 3
762-3104/000-001 CP 104 VGA TV

Po s: 5 /Dokumentation allgemein/Verzeichnisse/I nhaltsverzeichnis - ohne Gliederung - und Verzeichnis @ 3\ mod_1219151230875_21.doc @ 21063 @ @ 1

Table of Contents

1 Notes about this Documentation................................................................. 5

1.1 Scope of Validity....................................................................................... 5

1.2 Copyright................................................................................................... 5

1.3 Symbols..................................................................................................... 6

1.4 Number Notation....................................................................................... 8

1.5 Font Conventions ...................................................................................... 8

2 Important Notes........................................................................................... 9

2.1 Legal Bases ............................................................................................... 9

2.1.1 Subject to Changes............................................................................... 9

2.1.2 Personnel Qualification........................................................................ 9

2.1.3 Use of the 762 Series in Compliance with Underlying Provisions.... 10

2.1.4 Technical Condition of Specified Devices......................................... 10

2.2 Safety Advice (Precautions).................................................................... 11

3 Device Description ..................................................................................... 13

3.1 Control Panel with Target Visualization PERSPECTO CP TV ............. 13

3.2 View........................................................................................................14

3.2.1 Front View.......................................................................................... 14

3.2.2 Back view...........................................................................................15

3.3 Connectors............................................................................................... 16

3.3.1 X1 – Supply Voltage.......................................................................... 16

3.3.2 X2 – Serial Interfaces RS-232 (COM 3) and RS-485/RS-422 (COM 2)17

3.3.3 X3 – Serial Interface RS-232 (COM 1).............................................. 18

3.3.4 X4 – CAN 1 Interface......................................................................... 19

3.3.5 X5 – CAN 0 Interface......................................................................... 20

3.3.6 X6 – Ethernet Interface ...................................................................... 21

3.3.7 X8/X9 – USB Interfaces..................................................................... 22

3.4 Battery Case ............................................................................................ 23

3.5 Slot for Memory Card.............................................................................24

3.6 Operating Elements................................................................................. 25

3.6.1 Service Button.................................................................................... 25

3.7 Technical Data ........................................................................................ 26

3.7.1 Housing............................................................................................... 26

3.7.2 Power Supply...................................................................................... 26

3.7.3 Display................................................................................................ 26

3.7.4 Hardware ............................................................................................ 27

3.7.5 Software.............................................................................................. 27

3.7.6 Interfaces ............................................................................................ 27

3.8 Approvals................................................................................................28

3.9 Standards and Guidelines........................................................................ 28

4 Mounting..................................................................................................... 29

4.1 Front Panel Installation ........................................................................... 29

5 Connect Devices ......................................................................................... 30

6 Commissioning...........................................................................................31

6.1 Switch on................................................................................................. 31

Manual
Version 1.0.1

4 Table of Contents WAGO-PERSPECTO® 762
762-3104/000-001 CP 104 VGA TV

6.2 IP address of the device........................................................................... 32

6.2.1 General ............................................................................................... 32

6.2.2 Setting the IP Address........................................................................ 32

6.2.3 IP Address .......................................................................................... 33

6.3 The WAGO Control Center.................................................................... 34

6.3.1 Starting the WAGO Control Center................................................... 34

6.3.2 “General” Tab..................................................................................... 35

6.3.3 “Autostart Applications” Tab............................................................. 36

6.3.4 “Users” Tab........................................................................................ 37

6.3.5 “FTP” Tab .......................................................................................... 38

6.3.6 “HTTP” Tab ....................................................................................... 39

6.3.7 “RAS” Tab.......................................................................................... 40

6.3.8 “Backup/Restore” Tab........................................................................ 41

6.3.9 “Advanced” Tab................................................................................. 43

6.3.10 Saving the Configuration.................................................................... 44

6.4 Target-Visu ............................................................................................. 45

7 Service......................................................................................................... 46

7.1 Battery Maintenance ............................................................................... 46

=== Ende der Liste für Textmarke Verzeichnis_vorne ===

List of Figures...................................................................................................... 47

List of Tables........................................................................................................ 48

Manual
Version 1.0.1

WAGO-PERSPECTO® 762 Notes about this Documentation 5
762-3104/000-001 CP 104 VGA TV

Po s: 7 /Alle Serien (Allgemeine Module)/Überschr i ften für alle Serien/Hinweis zur Dokumentation/Hin weise zur Dokumentation - Überschrift 1 @ 4\mod_123798766175 0_21.doc @ 29029 @ 1 @ 1

1 Notes about this Documentation

Po s: 8 /Serie 762 (PERSPECTO)/Hinweise zu Dokumentation/Hin weis e zur Dokumentation 0762-xxxx @ 9\mod_1294732681438_2 1.doc @ 68130 @ @ 1

The CP 104 VGA TV 762-3104/000-001 shall only be installed and operated
according to the instructions in these operating.

Po s: 9 /Alle Serien (Allgemeine Module)/Hinweise zur Doku mentation/Hinweis: Dokumentation aufbewahren @ 4\ mod_1237987339812_21.doc @ 29026 @ @ 1

Keep this documentation!

The operating instructions are part of the product and shall be kept for the entire
lifetime of the device. They shall be transferred to each subsequent owner or user
of the device. Care must also be taken to ensure that any supplement to these
instructions are included, if applicable.

s: 10 /Serie 762 (PERSPECTO)/Hinweise zu Dokumentation/ Gültigkeitsbereich 0762-xxxx @ 9\mod_129473283 8794_21.doc @ 68133 @ 2 @ 1 Po

1.1 Scope of Validity

This documentation applies to PERSPECTO-Panel 762-3104/000-001 (CP 104

Po s: 11.1 /Alle Serien (Allgemeine Module)/Hinweise zur Dokumentation/Urheberschutz ausführlich @ 4\ mod_1235565145234_21.doc @ 27691 @ 2 @ 1

VGA TV).

1.2 Copyright

This Manual, including all figures and illustrations, is copyright-protected. Any
further use of this Manual by third parties that violate pertinent copyright
provisions is prohibited. Reproduction, translation, electronic and phototechnical
filing/archiving (e.g., photocopying) as well as any amendments require the
written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.
Non-observance will involve the right to assert damage claims.

Po s: 11.2 /Dokumentation allgemein/Gliederungse le mente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1

Manual
Version 1.0.1

6 Notes about this Documentation WAGO-PERSPECTO® 762
762-3104/000-001 CP 104 VGA TV

s: 11.3 /Alle Serien (Allgemeine Module)/Überschr iften für alle Serien/Hinweis zur Dokumentation/Sy mbole - Überschrift 2 @ 13\mod_1351068042408_21.doc @ 105270 @ 2 @ 1 Po

1.3 Symbols

Po s: 11.4.1 /Alle Serien (Allgemeine Module)/W ic htige Erläuterungen/Sicherheits- und sonstige Hinweise/ Gefahr/Gefahr: _Warnung vor Personenschäden allg e mein_ - Erläuterung @ 13\mod_1343309450020_21.doc @ 10102 9 @ @ 1

Personal Injury!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.

s: 11.4.2 /Alle Serien (Allgemeine Module)/W ic htige Erläuterungen/Sicherheits- und sonstige Hinweise/ Gefahr/Gefahr: _Warnung vor Personenschäden durc h elektrischen Strom_ - Erläuterung @ 13\mod_1343309694914 _21.doc @ 101030 @ @ 1 Po

Personal Injury Caused by Electric Current!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will
result in death or serious injury.

s: 11.4.3 /Alle Serien (Allgemeine Module)/W ic htige Erläuterungen/Sicherheits- und sonstige Hinweise/ Warnung/Warnung: _Warnung vor Personenschäden al lgemein_ - Erläuterung @ 13\mod_1343309877041_21.doc @ 101035 @ @ 1 Po

Personal Injury!

Indicates a moderate-risk, potentially hazardous situation which, if not avoided,
could result in death or serious injury.

s: 11.4.4 /Alle Serien (Allgemeine Module)/W ic htige Erläuterungen/Sicherheits- und sonstige Hin weise/ Vorsicht/Vorsicht: _Warnung vor Personenschäden a llgemein_ - Erläuterung @ 13\mod_1343310028762_21. doc @ 101038 @ @ 1 Po

Personal Injury!

Indicates a low-risk, potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.

4.5 /Alle Serien (Allgemeine Module)/Wichtige Er läut Sicherheits- und sonstige Hinweise/Achtung/A c htung: _Warnung vor Sachschäden allgemein_ - Erläuterung @ 13\ mod_1343310134623_21.doc @ 101041 @ @ 1 Pos: 11.

erungen/

Damage to Property!

Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.

4.6 /Alle Serien (Allgemeine Module)/Wichtige Er läuterungen/Sicherheits- und sonstige Hinweise/Ac htung/Achtung: _Warnung vor Sachschäden durch elektros tatische Aufladung_ - Erläuterung @ 13\mod_1343310 2277 02_21.doc @ 101044 @ @ 1 Pos: 11.

Damage to Property Caused by Electrostatic Discharge (ESD)!

Indicates a potentially hazardous situation which, if not avoided, may result in
damage to property.

4.7 /Alle Serien (Allgemeine Module)/Wichtige Er läut Sicherheits- und sonstige Hinweise/Hinweis/ Hinweis: _Wichtiger Hinweis allgemein_ - Eräuter ung @ 13\ mod_1343310326906_21.doc @ 101047 @ @ 1 Pos: 11.

erungen/

Important Note!

Indicates a potential malfunction which, if not avoided, however, will not result in
damage to property.

s: 11.4.8 /Alle Serien (Allgemeine Module)/W ic htige Erläuterungen/Sicherheits- und sonstige Hinweise/ Information/Information: _Weitere Inf ormation allgemein_ - Erläuterung @ 13\mod_1343310439814_2 1.doc @ 101051 @ @ 1 Po

Manual
Version 1.0.1

WAGO-PERSPECTO® 762 Notes about this Documentation 7
762-3104/000-001 CP 104 VGA TV

Additional Information:

Refers to additional information which is not an integral part of this
documentation (e.g., the Internet).

s: 11.5 /Dokumentation allgemein/Gliederungse le mente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1 Po

Manual
Version 1.0.1

8 Notes about this Documentation WAGO-PERSPECTO® 762
762-3104/000-001 CP 104 VGA TV

s: 11.6 /Alle Serien (Allgemeine Module)/Hinweise zur Dokumentation/Zahlensysteme @ 3\mod_1221059454 015_ 21.doc @ 21711 @ 2 @ 1 Po

1.4 Number Notation

Table 1: Number Notation

Number code Example Note

Decimal 100 Normal notation
Hexadecimal 0x64 C notation
Binary '100'

'0110.0100'

In quotation marks, nibble separated with
dots (.)

Po s: 11.7 /Alle Serien (Allgemeine Module)/Hinweise zur Dokumentation/Schriftkonventionen @ 3\mod_12210 59521437_21.doc @ 21714 @ 2 @ 1

1.5 Font Conventions

Table 2: Font Conventions

Font type Indicates

italic

Menu

>

Input

“Value” Input or selective values are marked in inverted commas.

[Button]

[Key]

Po s: 12 /Dokumentation allgemein/Gliederungsele m ent e/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1

Names of paths and data files are marked in italic-type.
e.g.: C:\Programme\WAGO-I/O-CHECK

Menu items are marked in bold letters.
e.g.: Save

A greater-than sign between two names means the selection of a
menu item from a menu.
e.g.: File > New

Designation of input or optional fields are marked in bold letters,
e.g.: Start of measurement range

e.g.: Enter the value “4 mA” under Start of measurement range.
Pushbuttons in dialog boxes are marked with bold letters in square

brackets.
e.g.: [Input]

Keys are marked with bold letters in square brackets.
e.g.: [F5]

Manual
Version 1.0.1

WAGO-PERSPECTO® 762 Important Notes 9
762-3104/000-001 CP 104 VGA TV

s: 13 /Alle Serien (Allgemeine Module)/Überschri ften für alle Serien/Wichtige Erläuterungen/W ichtige Erläuterungen - Überschrift 1 @ 4\mod_1241428899 156_ 21.doc @ 32170 @ 1 @ 1 Po

2 Important Notes

Po s: 14.1 /Alle Serien (Allgemeine Module)/Wichti ge Erläuterungen/Einleitung Wichtige Erläuterung en @ 3\ mod_1221059818031_21.doc @ 21717 @ @ 1

This section includes an overall summary of the most important safety
requirements and notes that are mentioned in each individual section. To protect
your health and prevent damage to devices as well, it is imperative to read and
carefully follow the safety guidelines.

Po s: 14.2 /Alle Serien (Allgemeine Module)/Überschr iften für alle Serien/Wichtige Erläuterungen/Rech tliche Grundlagen - Überschrift 2 @ 3\mod_12210606263 43_21.doc @ 21726 @ 2 @ 1

2.1 Legal Bases

Po s: 14.3 /Alle Serien (Allgemeine Module)/Wichti ge Erläuterungen/Änderungsvorbehalt - Überschr i ft 3 und Inhalt @ 3\mod_1221060036484_21.doc @ 21720 @ 3 @ 1

2.1.1 Subject to Changes

WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications that serve to increase the efficiency of technical
progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from
the granting of patents or from the legal protection of utility patents. Third-party
products are always mentioned without any reference to patent rights. Thus, the
existence of such rights cannot be excluded.

Po s: 14.4 /Serie 762 (PERSPECTO)/Wichtige Erläuterungen/ Personalqualifikation 0762-xxxx @ 9\mod_12947 33290824_21.doc @ 68136 @ 3 @ 1

2.1.2 Personnel Qualification

Po s: 14.5 /Dokumentation allgemein/Gliederungse le mente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1

All sequences implemented on Series 762 devices may only be carried out by
electrical specialists with sufficient knowledge in automation. The specialists
must be familiar with the current norms and guidelines for the devices and
automated environments.

All changes to the controller shall always be performed by qualified personnel
with sufficient skills in PLC programming.

Manual
Version 1.0.1

10 Important Notes WAGO-PERSPECTO® 762
762-3104/000-001 CP 104 VGA TV

s: 14.6 /Serie 762 (PERSPECTO)/Wichtige Erläuterungen/ Bestimmungsgemäße Verwendung 0762-xxxx @ 9\mod_129 4733371727_21.doc @ 68139 @ 3 @ 1 Po

2.1.3 Use of the 762 Series in Compliance with Underlying Provisions

762 Series modules are suitable for use in the area of time control and automation.
Their use extends beyond residential and commercial areas, as well as industrial
areas. Technical data must be observed for all types of applications.

Radio interference in residential areas

This is a class A device. This device can cause radio interference in residential
areas. In this case, the operator may be required to take appropriate measures.

Po s: 14.7 /Alle Serien (Allgemeine Module)/Wichti ge Erläuterungen/Technischer Zustand der Geräte - Übersc hr ift 3 und Inhalt @ 3\mod_1221060446109_21.doc @ 21723 @ 3 @ 1

2.1.4 Technical Condition of Specified Devices

The components to be supplied Ex Works, are equipped with hardware and
software configurations, which meet the individual application requirements.
WAGO Kontakttechnik GmbH & Co. KG will be exempted from any liability in
case of changes in hardware or software as well as to non-compliant usage of
components.

Please send your request for modified and new hardware or software
configurations directly to WAGO Kontakttechnik GmbH & Co. KG.

Po s: 14.8 /Serie 762 (PERSPECTO)/Wichtige Erläuterungen/ Sicherheitshinweise/Hinweis/Hinweis: Pi xelfehler im TFT-Display @ 10\mod_1306840913476_21. doc @ 73481 @ @ 1

Pixel error in TFT display

Any pixel errors of the TFT display due to production reasons do not represent
grounds for complaint!

Po s: 14.9 /Dokumentation allgemein/Gliederungse le mente/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1

Manual
Version 1.0.1

WAGO-PERSPECTO® 762 Important Notes 11
762-3104/000-001 CP 104 VGA TV

s: 14.10 /Alle Serien (Allgemeine Module)/Überschr iften für alle Serien/Wichtige Erläuterungen/Si cherheitshinweise - Überschrift 2 @ 6\mod_1260180299 987_21.doc @ 46724 @ 2 @ 1 Po

2.2 Safety Advice (Precautions)

Po s: 14.11 /Alle Serien (Allgemeine Module)/Wichti ge Erläuterungen/Sicherheits- und sonstige Hinweis e/Einleitung Sicherheitshinweise Hardware @ 6\mo d_12 60180170493_21.doc @ 46720 @ @ 1

For installing and operating purposes of the relevant device to your system the
following safety precautions shall be observed:

Po s: 14.12.1 /Alle Serien (Allgemeine Module)/W ic htige Erläuterungen/Sicherheits- und sonstige Hin weis e/Gefahr/Gefahr: Nicht an Geräten unter Spannung arbei ten! @ 6\mod_1260180365327_21.doc @ 46727 @ @ 1

Do not work on components while energized!

All power sources to the device shall be switched off prior to performing any
installation, repair or maintenance work.

s: 14.12.2 /Serie 762 (PERSPECTO)/Wichtige Erläuterungen/Si cherheitshinweise/Gefahr/Gefahr: Einbau 0762- xxxx nur in Gehäusen, Schränken oder elektrischen Betr iebsräumen! @ 10\mod_1300116248588_21.doc @ 70737 @ @ 1 Po

Installation only in appropriate housings, cabinets or in electrical operation
rooms!

The PERSPECTO Panel is an open system. As such, install the system
exclusively in appropriate housings, cabinets or in electrical operation rooms.
Allow access to such equipment and fixtures to authorized, qualified staff only by
means of specific keys or tools.

s: 14.12.3 /Alle Serien (Allgemeine Module)/W ic htige Erläuterungen/Sicherheits- und sonstige Hin weis e/Gefahr/Gefahr: Unfallverhütungsvorsc hriften beachten! @ 6\mod_1260180657000_21.doc @ 46735 @ @ 1 Po

s: 14.12.4 /Alle Serien (Allgemeine Module)/W ic htige Erläuterungen/Sicherheits- und sonstige Hin weis e/Gefahr/Gefahr: Auf normgerechten Anschluss achten! @ 6\ mod_1260180753479_21.doc @ 46739 @ @ 1 Po

s: 14.13.1 /Alle Serien (Allgemeine Module)/W ic htige Erläuterungen/Sicherheits- und sonstige Hin weis e/Achtung/Achtung: Defekte oder beschädigte Geräte a ustauschen! @ 6\mod_1260180857358_21.doc @ 46743 @ @ 1 Po

Replace defective or damaged devices!

Replace defective or damaged device/module (e.g., in the event of deformed
contacts), since the long-term functionality of device/module involved can no
longer be ensured.

s: 14.13.2 /Alle Serien (Allgemeine Module)/W ic htige Erläuterungen/Sicherheits- und sonstige Hin weis e/Achtung/Achtung: Geräte vor kriechenden und iso lierenden Stoffen schützen! @ 6\mod_1260181036216_21. doc @ 46747 @ @ 1 Po

Protect the components against materials having seeping and insulating
properties!

The components are not resistant to materials having seeping and insulating
properties such as: aerosols, silicones and triglycerides (found in some hand
creams). If you cannot exclude that such materials will appear in the component
environment, then install the components in an enclosure being resistant to the
above-mentioned materials. Clean tools and materials are imperative for handling
devices/modules.

s: 14.13.3 /Alle Serien (Allgemeine Module)/W ic htige Erläuterungen/Sicherheits- und sonstige Hin weis e/Achtung/Achtung: Reinigung nur mit zulässigen Mater i alien! @ 6\mod_1260181203293_21.doc @ 46751 @ @ 1 Po

Cleaning only with permitted materials!

Clean soiled contacts using oil-free compressed air or with ethyl alcohol and
leather cloths.

13.4 /Alle Serien (Allgemeine Module)/Wichtige Er läuterungen/Sicherheits- und sonstige Hinweise/ Achtung/Achtung: Kein Kontaktspray verwenden! @ 6\ mod_1260181290808_21.doc @ 46755 @ @ 1 Pos: 14.

Manual
Version 1.0.1

12 Important Notes WAGO-PERSPECTO® 762
762-3104/000-001 CP 104 VGA TV

Do not use any contact spray!

Do not use any contact spray. The spray may impair contact area functionality in
connection with contamination.

s: 14.13.5 /Alle Serien (Allgemeine Module)/W ic htige Erläuterungen/Sicherheits- und sonstige Hin weis e/Achtung/Achtung: Elektrostatische Entladung vermeiden! @ 6\mod_1260181364729_21.doc @ 46759 @ @ 1 Po

Avoid electrostatic discharge!

The devices are equipped with electronic components that you may destroy by
electrostatic discharge when you touch. Pay attention while handling the devices
to good grounding of the environment (persons, job and packing).

s: 15 /Dokumentation allgemein/Gliederungsele m ent e/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1 Po

Manual
Version 1.0.1

WAGO-PERSPECTO® 762 Device Description 13
762-3104/000-001 CP 104 VGA TV

s: 16 /Alle Serien (Allgemeine Module)/Überschri ften für alle Serien/Gerätebeschreibung/Geräteb eschreibung - Überschrift 1 @ 3\mod_1233756084656_21. doc @ 27096 @ 1 @ 1 Po

3 Device Description

Pos: 17 /Serie 762 (PERSPECTO)/Gerätebeschreibung/Be schreibung/Gerätebeschreibung 0762-xxxx allg emein @ 9\mod_1294144990053_21.doc @ 67820 @ @ 1

The 762 Series panels are used to operate and visualize the controllers of the
WAGO-I/O-SYSTEM. The integrated WAGO-AUTOMATION COCKPIT
development environment is used to program the panels and controllers.

Po s: 18 /Serie 762 (PERSPECTO)/Gerätebeschreibung/Be schreibung/Gerätebeschreibung 0762-3xxx/0000- 000x CPTV @ 9\mod_1294213875416_21.doc @ 67880 @ 2 @ 1

3.1 Control Panel with Target Visualization PERSPECTO CP TV

In addition to target visualization, the control panel with target vizualisation also
has a CoDeSys runtime, making it a full-fledged automation device. PERSPECTO
CP provides configurable functions for operation and monitoring, and can
independently process control tasks.

The PLC functionality is based on the IEC 61131-compatible CoDeSys
environment. Corresponding libraries provide hardware access - even from a PLC
program.

Po s: 19 /Dokumentation allgemein/Gliederungsele m ent e/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1

Manual
Version 1.0.1

14 Device Description WAGO-PERSPECTO® 762
762-3104/000-001 CP 104 VGA TV

s: 20 /Alle Serien (Allgemeine Module)/Überschri ften für alle Serien/Gerätebeschreibung/Ansic ht - Überschrift 2 @ 4\mod_1240984217343_21.doc @ 31958 @ 2 @ 1 Po

3.2 View

Po s: 21 /Serie 762 (PERSPECTO)/Gerätebeschreibung/An sicht/Frontansicht 0762-x104/xxxx-xxxx @ 9\ mod_1294231211300_21.doc @ 67993 @ 3 @ 1

3.2.1 Front View

Po s: 22 /Dokumentation allgemein/Gliederungsele m ent e/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1

Figure 1: Front view

Table 3: Legend acc. to figure “Front view”

No. Description

1 Front panel
2 Touch screen display

Manual
Version 1.0.1

WAGO-PERSPECTO® 762 Device Description 15
762-3104/000-001 CP 104 VGA TV

s: 23 /Serie 762 (PERSPECTO)/Gerätebeschreibung/An sicht/Rückansicht 0762-3104/xxxx-xxxx @ 10\ mo d_1 313591868511_21.doc @ 77198 @ 3 @ 1 Po

3.2.2 Back view

Po s: 24 /Dokumentation allgemein/Gliederungsele m ent e/---Seitenwechsel--- @ 3\mod_1221108045078_0.doc @ 21810 @ @ 1

Figure 2: Back view

Table 4: Legend acc. to figure “Back view”

No. Designation Description

1 - Housing
2 X1 Connection for 24VDC power supply

3 X2

RS-232 serial interface (COM 3) and RS-485/RS-422

serial interface (COM 2) as D-sub 9 connector
4 X3 RS-232 serial interface (COM 1) as D-sub 9 connector
5 X4 CAN-Bus 1 (CANopen) interface as D-sub 9 connector
6 X5 CAN-Bus 0 (CANopen) interface as RJ45 jack
7 X8/X9 USB host interfaces
8 X6 Ethernet interface as RJ45 jack
9 Service Service button

10

3V Battery

CR1/2AA

Battery case

11 X13 Slot for CF memory card

Manual
Version 1.0.1