Wago 762-3150/000-001 Users Manual

Manual

WAGO PERSPECTO® 762

762-3150/000-001

CP 150 XGA TV

PERSPECTO Target Visualization

Version 1.0.2

CP, Control Panel with CoDeSys

2 WAGO PERSPECTO® 762 762-3150/000-001 CP 150 XGA TV

Manual Version 1.0.2

WAGO PERSPECTO® 762 Table of Contents 3 762-3150/000-001 CP 150 XGA TV

Table of Contents

1 Notes about this Documentation ............................................................. 5

1.1 Scope of Validity ..................................................................................... 5

1.2 Copyright ................................................................................................ 5

1.3 Symbols ................................................................................................. 6

1.4 Number Notation .................................................................................... 8

1.5 Font Conventions ................................................................................... 8

2 Important Notes ........................................................................................ 9

2.1 Legal Bases ............................................................................................ 9

2.1.1 Subject to Changes ............................................................................ 9

2.1.2 Personnel Qualification ...................................................................... 9

2.1.3 Use of the 762 Series in Compliance with Underlying Provisions ....... 9

2.1.4 Technical Condition of Specified Devices........................................... 9

2.2 Safety Advice (Precautions) ................................................................. 11

3 Device Description .................................................................................. 13

3.1 Control Panel with Target Visualization PERSPECTO CP TV .............. 13

3.2 View ..................................................................................................... 14

3.2.1 Front View ........................................................................................ 14

3.2.2 Back View ........................................................................................ 15

3.3 Connectors ........................................................................................... 16

3.3.1 X1 – Supply Voltage ........................................................................ 16

3.3.2 X2 – Serial Interface RS-232/RS-485/RS-422 (COM 2) ................... 17

3.3.3 X3 – Serial Interface RS-232 (COM 1) ............................................. 18

3.3.4 X6 – ETHERNET Interface 10/100/1000 MBit .................................. 19

3.3.5 X8/X9/X10/X11 – USB Interfaces ..................................................... 20

3.4 Battery Case ......................................................................................... 21

3.5 Slot for Memory Card ........................................................................... 22

3.6 Operating Elements .............................................................................. 23

3.6.1 S

3.7 Technical Data ..................................................................................... 24

3.7.1 Housing............................................................................................ 24

3.7.2 Power Supply ................................................................................... 24

3.7.3 Display ............................................................................................. 24

3.7.4 Hardware ......................................................................................... 25

3.7.5 Software........................................................................................... 25

3.7.6 Interfaces ......................................................................................... 25

3.8 Approvals ............................................................................................. 26

3.9 Standards and Guidelines .................................................................... 26

ervice Button.................................................................................. 23

4 Mounting .................................................................................................. 27

4.1 Front Panel Installation ......................................................................... 27

5 Connect Devices ..................................................................................... 28

5.1 Supply voltage ...................................................................................... 28

5.2 Grounding............................................................................................. 28

5.3 Peripheral Devices ............................................................................... 28

6 Commissioning ....................................................................................... 29

Manual Version 1.0.2

4 Table of Contents WAGO PERSPECTO® 762 762-3150/000-001 CP 150 XGA TV

6.1 Switch on .............................................................................................. 29

6.2 IP Address of the Device ...................................................................... 30

6.2.1 General ............................................................................................ 30

6.2.2 Setting the IP Address ..................................................................... 30

6.2.3 IP Address ....................................................................................... 31

6.3 The WAGO Control Center ................................................................... 32

6.3.1 Starting the WAGO Control Center .................................................. 32

6.3.2 “General” Tab .................................................................................. 33

6.3.3 “Autostart Applications” Tab ............................................................. 34

6.3.4 “Users” Tab ...................................................................................... 35

6.3.5 “FTP” Tab ........................................................................................ 36

6.3.6 “HTTP” Tab ...................................................................................... 37

6.3.7 “RAS” Tab ........................................................................................ 38

6.3.8 “Backup/Restore” Tab ...................................................................... 39

6.3.9 “Advanced” Tab ............................................................................... 41

6.3.10 Saving the Configuration .................................................................. 42

6.4 Target-Visu ........................................................................................... 43

7 Service ..................................................................................................... 44

7.1 Battery Maintenance ............................................................................. 44

List of Figures .................................................................................................. 45

List of Tables .................................................................................................... 46

Manual Version 1.0.2

WAGO PERSPECTO® 762 Notes about this Documentation 5 762-3150/000-001 CP 150 XGA TV

1 Notes about this Documentation

The CP 150 XGA TV 762-3150/000-001 shall only be installed and operated according to the instructions in these operating.

Always retain this documentation!

This documentation is part of the product. Therefore, retain the documentation during the entire service life of the product. Pass on the documentation to any subsequent user. In addition, ensure that any supplement to this documentation is included, if necessary.

1.1 Scope of Validity

This documentation applies to PERSPECTO-Panel 762-3150/000-001 (CP 150 XGA TV).

1.2 Copyright

This Manual, including all figures and illustrations, is copyright-protected. Any further use of this Manual by third parties that violate pertinent copyright provisions is prohibited. Reproduction, translation, electronic and phototechnical filing/archiving (e.g., photocopying) as well as any amendments require the written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany. Non-observance will involve the right to assert damage claims.

Manual Version 1.0.2

6 Notes about this Documentation WAGO PERSPECTO® 762 762-3150/000-001 CP 150 XGA TV

1.3 Symbols

Personal Injury!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will result in death or serious injury.

Personal Injury Caused by Electric Current!

Indicates a high-risk, imminently hazardous situation which, if not avoided, will result in death or serious injury.

Personal Injury!

Indicates a moderate-risk, potentially hazardous situation which, if not avoided, could result in death or serious injury.

Personal Injury!

Indicates a low-risk, potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Damage to Property!

Indicates a potentially hazardous situation which, if not avoided, may result in damage to property.

Damage to Property Caused by Electrostatic Discharge (ESD)!

Indicates a potentially hazardous situation which, if not avoided, may result in damage to property.

Important Note!

Indicates a potential malfunction which, if not avoided, however, will not result in damage to property.

Manual Version 1.0.2

WAGO PERSPECTO® 762 Notes about this Documentation 7 762-3150/000-001 CP 150 XGA TV

Additional Information:

Refers to additional information which is not an integral part of this documentation (e.g., the Internet).

Manual Version 1.0.2

8 Notes about this Documentation WAGO PERSPECTO® 762

Table 1: Number Notation

Number Code

Example

Note

Decimal

100

Normal notation

Hexadecimal

0x64

C notation

Binary

'100' '0110.0100'

In quotation marks, nibble separated with dots (.)

Table 2: Font Conventions

Font Type

Indicates

italic

Names of paths and data files are marked in italic-type.

Menu items are marked in bold letters. e.g.: Save

A greater-than sign between two names means the selection of a

e.g.: File > New

Input

Designation of input or optional fields are marked in bold letters,

Start of measurement range

“Value”

Input or selective values are marked in inverted commas.

Start of measurement range

[Button]

Pushbuttons in dialog boxes are marked with bold letters in square

e.g.: [Input]

[Key]

Keys are marked with bold letters in square brackets. e.g.: [F5]

762-3150/000-001 CP 150 XGA TV

1.4 Number Notation

1.5 Font Conventions

e.g.: C:\Program Files\WAGO Software

menu item from a menu.

e.g.:

e.g.: Enter the value “4 mA” under

brackets.

Manual Version 1.0.2

WAGO PERSPECTO® 762 Important Notes 9 762-3150/000-001 CP 150 XGA TV

2 Important Notes

This section includes an overall summary of the most important safety requirements and notes that are mentioned in each individual section. To protect your health and prevent damage to devices as well, it is imperative to read and carefully follow the safety guidelines.

2.1 Legal Bases

2.1.1 Subject to Changes

WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any alterations or modifications. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from the granting of patents or from the legal protection of utility patents. Third-party products are always mentioned without any reference to patent rights. Thus, the existence of such rights cannot be excluded.

2.1.2 Personnel Qualification

All sequences implemented on Series 762 devices may only be carried out by electrical specialists with sufficient knowledge in automation technology. These specialists must be familiar with the current standards and guidelines for the devices and the automated environments.

All changes to the controller shall always be performed by qualified personnel with sufficient skills in PLC programming.

2.1.3 Use of the 762 Series in Compliance with Underlying Provisions

762 Series modules are suitable for use in the area of time control and automation. Their use extends beyond residential and commercial areas, as well as industrial areas. Technical data must be observed for all types of applications.

Radio interference in residential areas

This is a class A device. This device can cause radio interference in residential areas. In this case, the operator may be required to take appropriate measures.

2.1.4 Technical Condition of Specified Devices

The devices to be supplied ex works are equipped with hardware and software configurations, which meet the individual application requirements. These modules contain no parts that can be serviced or repaired by the user. The

Manual Version 1.0.2

10 Important Notes WAGO PERSPECTO® 762 762-3150/000-001 CP 150 XGA TV

following actions will result in the exclusion of liability on the part of WAGO Kontakttechnik GmbH & Co. KG:

• Repairs,

• Changes to the hardware or software that are not described in the

operating instructions,

• Improper use of the components.

Further details are given in the contractual agreements. Please send your request for modified and new hardware or software configurations directly to WAGO Kontakttechnik GmbH & Co. KG.

Pixel error in TFT display

Any pixel errors of the TFT display due to production reasons do not represent grounds for complaint!

Manual Version 1.0.2

WAGO PERSPECTO® 762 Important Notes 11 762-3150/000-001 CP 150 XGA TV

2.2 Safety Advice (Precautions)

For installing and operating purposes of the relevant device to your system the following safety precautions shall be observed:

Do not work on devices while energized!

All power sources to the device shall be switched off prior to performing any installation, repair or maintenance work.

Install only in appropriate housings, cabinets or in electrical operation rooms!

The device is an open unit. As such, install it exclusively in appropriate housings, cabinets or in electrical operation rooms. Allow access to authorized staff only by means of specific keys or tools.

Replace defective or damaged devices!

Replace defective or damaged device/module (e.g., in the event of deformed contacts), since the long-term functionality of device/module involved can no longer be ensured.

Protect the components against materials having seeping and insulating properties!

The components are not resistant to materials having seeping and insulating properties such as: aerosols, silicones and triglycerides (found in some hand creams). If you cannot exclude that such materials will appear in the component environment, then install the components in an enclosure being resistant to the above-mentioned materials. Clean tools and materials are imperative for handling devices/modules.

Clean only with permitted materials!

Clean housing and soiled contacts with propanol.

Manual Version 1.0.2

12 Important Notes WAGO PERSPECTO® 762 762-3150/000-001 CP 150 XGA TV

Do not use any contact spray!

Do not use any contact spray. The spray may impair contact area functionality in connection with contamination.

Do not use in telecommunication circuits!

Only use devices equipped with ETHERNET or RJ-45 connectors in LANs. Never connect these devices with telecommunication networks.

Avoid electrostatic discharge!

The devices are equipped with electronic components that may be destroyed by electrostatic discharge when touched. Please observe the safety precautions against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the devices, please ensure that environmental factors (personnel, work space and packaging) are properly grounded.

Manual Version 1.0.2

WAGO PERSPECTO® 762 Device Description 13 762-3150/000-001 CP 150 XGA TV

3 Device Description

The 762 Series panels are used to operate and visualize the controllers of the WAGO-I/O-SYSTEM. The integrated WAGO-AUTOMATION COCKPIT development environment is used to program the panels and controllers.

3.1 Control Panel with Target Visualization PERSPECTO CP TV

In addition to target visualization, the control panel with target visualization also has a CODESYS runtime, making it a full-fledged automation device. PERSPECTO CP provides configurable functions for operation and monitoring, and can independently process control tasks.

The PLC functionality is based on the IEC 61131-compatible CODESYS environment. Corresponding libraries provide hardware access - even from a PLC program.

Manual Version 1.0.2

14 Device Description WAGO PERSPECTO® 762

Table 3: Legend for Figure “Front View”

No.

Description

Front panel

Touch screen display

762-3150/000-001 CP 150 XGA TV

3.2 View

3.2.1 Front View

Figure 1: Front View

Manual Version 1.0.2

WAGO PERSPECTO® 762 Device Description 15

Table 4: Legend for Figure “Back View”

No.

Designation

Description

Housing 2 X1

Connection for 24VDC power supply

3V Battery

RS-232 or RS-485/RS-422 serial interface (COM 2) as Dsub 9 connector

RS-232 serial interface (COM 1) as D-sub 9 connector

ETHERNET interface as RJ45 jack

X8/X9

USB host interfaces

X10/X11

USB host interfaces

CAN-R

Not used

X13

Slot for SD memory card

762-3150/000-001 CP 150 XGA TV

3.2.2 Back View

Figure 2: Back View

4 X2

CR2477N

Battery case

Manual Version 1.0.2

+ 33 hidden pages