Page 1
750-963
CANopen Fieldbus Connector
<_22.9 mm>
5.4 mm>
<
< 5.8 mm >
<_________45 m m ________>
<_1 9 m __>
<_____________54 mm_________>
The fieldbus connector links a CANopen device to a CANopen line.
The fieldbus connector has the following features:
• 2 horizontal cable entries. One input and one output.
• Fast and maintenance-free CAGE CLAMP
®
connection, can be held in the
open position with the help of an actuation slide mechanism.
• Externally operable switch to activate and/or deactivate the network
terminating resistor.
•
15 °
120 Ω
<__36 mm / 1.42 in
<__5-6 mm / 0.22 in
__>
<__10 mm / 0.394 in
16 mm
w 750
<_____37.2 mm_____>
<_____ 36 .7mm _____>
L
H
GND
L
H
GND
1 2 3 4 5
6 7 8 9
__>
__>
For the first and last station on the bus, the switch must be set to “ON”
(terminating resistor activated). Switch setting to “OFF” for the intermediate
stations on the bus (terminating resistor deactivated).
Description
Bus connector with D-Sub female
Item no.
750-963 1
Pack.
unit
connector; 9 poles
Accessories
Item no.
Pack.
unit
Screwdriver with partially insulated shaft 210-619 50
Type 1, blade 2.5 x 0.4 mm / 0.098 x 0.016 in
Screwdriver with partially insulated shaft; 210-620 50
Type 2, blade 3.5 x 0.5 mm / 0.137 x 0.020 in
Operating tool for strain relief
Phillips screwdriver (PH 0)
Test pin, 1 mm / Test wire for soldering 735-500 100
Marking possibilities
Miniature WSB Quick marking system or WMB Multi marking system
Approvals
r UL 508
Technical Data
Double cable input min. Ø 4.5 mm/0.177 in / max. Ø 9.5
Data transmission rate corresponding to CANopen specification
Fixing screw UNC- 2 A 4-40
Max. tightening torque 0.4 Nm
Housing material PA66-105-V2
Housing color light gray
Degree of protection IP20
Ambient operating temperature 0 °C ... +60 °C
Storage temperature -25 °C ... +85 °C
Relative air humidity (no condensation) 95 %
Wire connection CAGE CLAMP
Cross sections 0.08 mm² ... 0.5 mm² / AWG 28 ... 20
Stripped length see graphic
10 kbaud ... 1 Mbaud
®
terminal strip with locking
slide (Series 218)
sep. connection 0.75 mm² / AWG 18
possible
Subject to design changes WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Tel.: +49(0)571/887-0 E-Mail: info@wago.com
10.09.2008 Hansastr. 27 •D-32423 Minden Fax: +49(0)571/887-169 www.wago.com
Loading...