Data sheet | Item number: 2092-1409
THT male header; 1.4 mm Ø solder pin; straight; Pin spacing 5 mm; 9-pole
2092-1409
L = (pole number x pin spacing) + 2.2 mm
A = 3.6 mm THT solder pin
A = 2.4 mm THR solder pin
Color:
Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
The female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20 g
Safety information 1:
The picoMAX® pluggable connection system is designed without breaking capacity for compliance with DIN EN 61984. When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
02.05.2019 Page 1/4
Data sheet | Item number: 2092-1409
2092-1409
Ratings per IEC/EN 60664-1
Rated voltage (III / 3) |
250V |
Rated impulse voltage (III / 3) |
4kV |
Rated voltage (III / 2) |
320V |
Rated impulse voltage (III / 2) |
4kV |
Rated voltage (II / 2) |
630V |
Rated impulse voltage (II / 2) |
4kV |
Rated current |
16A |
Rated voltage UL (Use Group B) |
300V |
Rated current UL (Use Group B) |
15A |
Rated voltage UL (Use Group D) |
300V |
Rated current UL (Use Group D) |
10A |
No. of poles |
9 |
Total number of potentials |
9 |
Number of connection types |
1 |
Number of levels |
1 |
Pin spacing |
5 mm / 0.197 inch |
Width |
47.2 mm / 1.858 inch |
Height |
23.1 mm / 0.909 inch |
Height from the surface |
19.5 mm / 0.768 inch |
Depth |
14.4 mm / 0.567 inch |
Solder pin length |
3.6mm |
Solder pin diameter |
1.4mm |
Drilled hole diameter (tolerance) |
1.6(- … +0.1) mm |
Contact type (pluggable connector) |
Male connector/plug |
Connector connection type |
for PCBs |
Mismating protection |
No |
Mating direction to the PCB |
90° |
Locking of plug-in connection |
Male locking latch |
02.05.2019 Page 2/4