Data sheet | Item number: 2091-1177/200-000/997-407
1-conductor THR female header; 1.0 mm Ø solder pin; straight; in tape-and- reel packaging; 1.5 mm²; Pin spacing 3.5 mm; 7-pole; 1,50 mm2; light gray
2091-1177_200-000_997-407
L = (pole number x pin spacing)
A = 3.6 mm THT solder pin
A = 2.4 mm THR solder pin
Color:
Item description
Universal connection for all conductor types
Simple, push-in termination of solid and ferruled conductors
Easy-to-use design does not require specialty tools
Ability to wire while mated or unmated
Integrated test ports for testing parallel to conductor entry
Factory-installed, straight or angled solder pins allow horizontal or vertical mounting to the PCB
Safety information 1:
The picoMAX® pluggable connection system is designed without breaking capacity for compliance with DIN EN 61984. When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.
22.08.2019 Page 1/4
Data sheet | Item number: 2091-1177/200-000/997-407
2091-1177_200-000_997-407
Data
Electrical data
Ratings per IEC/EN 60664-1
Rated voltage (III / 3) |
160V |
Rated impulse voltage (III / 3) |
2.5kV |
Rated voltage (III / 2) |
160V |
Rated impulse voltage (III / 2) |
2.5kV |
Rated voltage (II / 2) |
320V |
Rated impulse voltage (II / 2) |
2.5kV |
Rated current |
10A |
Approvals per UL 1059
Rated voltage UL (Use Group B) |
300V |
Rated current UL (Use Group B) |
10A |
Rated voltage UL (Use Group D) |
300V |
Connection data
Connection technology |
Push-in CAGE CLAMP® |
|||
Actuation type |
Push-button |
|
||
Solid conductor |
0.2 |
|
1.5 mm² / 24 |
14 AWG |
Fine-stranded conductor |
0.2 |
|
1.5 mm² / 24 |
14 AWG |
Fine-stranded conductor with ferrule with plastic collar |
0.25 |
0.75 mm² |
|
|
Fine-stranded conductor with ferrule without plastic collar |
0.25 |
1.5 mm² |
|
|
Strip length |
8 |
9 mm / 0.31 |
0.35 inch |
|
Conductor entry angle to the PCB |
90° |
|
|
|
Total number of connection points |
7 |
|
|
|
Total number of potentials |
7 |
|
|
|
Number of connection types |
1 |
|
|
|
Number of levels |
1 |
|
|
|
No. of poles |
7 |
|
|
|
Geometrical Data
Pin spacing |
3.5 mm / 0.138 inch |
Width |
24.5 mm / 0.965 inch |
Height |
14 mm / 0.551 inch |
Depth |
11.4 mm / 0.449 inch |
Solder pin length |
2.4mm |
Solder pin diameter |
1mm |
22.08.2019 Page 2/4