Wago 2001-1411/1000-410 Data Sheet

Data sheet | Item number: 2001-1411/1000-410

Component terminal block; 4-conductor; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 1.5 mm²; Push-in CAGE CLAMP®

2001-1411/1000-410

Color:

Data

Electrical data

Nominal voltage	250V
Reverse voltage	1000V

Ratings per IEC/EN 60664-1

Rated current

0.5A

Approvals per UL 1059

Rated voltage UL (Use Group B)	600V
Rated current UL (Use Group B)	15A
Rated voltage UL (Use Group C)	600V
Rated current UL (Use Group C)	15A

Connection data

Connection technology	Push-in CAGE CLAMP®
Actuation type	Push-in
	Open Tool Slot
Connectable conductor materials	Copper
Nominal cross section	1.5 mm²

02.05.2019 Page 1/8

Data sheet | Item number: 2001-1411/1000-410

2001-1411/1000-410
Solid conductor	0.25 … 2.5 mm² / 22 … 14 AWG
Solid conductor, push-in termination	0.75 … 2.5 mm² / 18 … 14 AWG
Fine-stranded conductor	0.25 … 2.5 mm² / 22 … 14 AWG
Strip length	9 … 11 mm / 0.35 … 0.43 inch
Note (conductor cross-section)	Depending on the conductor characteristic, a conductor with a
	smaller cross section can also be inserted via push-in termination.
Total number of connection points	4
Total number of potentials	1
Number of levels	1
Type of wiring	Front-entry wiring
Geometrical Data
Width	4.2 mm / 0.165 inch
Height from upper-edge of DIN-35 rail	32.9 mm / 1.295 inch
Depth	69.9 mm / 2.752 inch
Mechanical data
Design	horizontal
Type of mounting	DIN-35 rail
Marking level	Center/side marking
Material Data
Color	gray
Insulating material	Polyamide 66 (PA 66)
Fire load	0.124MJ
Weight	6.19g
Commercial data
Product Group	22 (TOPJOB S)
Country of origin	CN
GTIN	4045454537609
Customs Tariff No.	85369010000
Compatible products

02.05.2019 Page 2/8

Data sheet | Item number: 2001-1411/1000-410

2001-1411/1000-410

	Insulation stop
	Item no.: 2001-171	2001-171
	Insulation stop; 0.25 - 0.5 mm²; 5 pieces/strip
	Carrier rail
	Item no.: 210-112	210-112
	Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to EN 60715; "Hole width 25
	mm
	Item no.: 210-113	210-113
	Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; unslotted; according to EN 60715
	Item no.: 210-114	210-114
	Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; unslotted; similar to EN 60715
	Item no.: 210-115	210-115
	Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to EN 60715; "Hole width 18
	mm
	Item no.: 210-118	210-118
	Steel carrier rail; 35 x 15 mm; 2.3 mm thick; 2 m long; unslotted; according to EN 60715
	Item no.: 210-196	210-196
	Aluminum carrier rail; 35 x 8.2 mm; 1.6 mm thick; 2 m long; unslotted; similar to EN 60715
	Item no.: 210-197	210-197
	Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; slotted; similar to EN 60715
	Item no.: 210-198	210-198
	Copper carrier rail; 35 x 15 mm; 2.3 mm thick; 2 m long; unslotted; according to EN 60715
	Protective Warning Marker
	Item no.: 2001-115	2001-115
	Protective warning marker; with high-voltage symbol, black; for 5 terminal blocks
	Marking accessories
	Item no.: 2009-110	2009-110
	Marking strips; on reel; not stretchable; plain; snap-on type
	Item no.: 2009-114	2009-114
	WMB-Inline; for Smart Printer; on reel; stretchable 4 - 4.2 mm; plain; snap-on type
	Item no.: 2009-114/000-002	2009-114
	WMB-Inline; for Smart Printer; on reel; stretchable 4 - 4.2 mm; plain; snap-on type	/000-002
	Item no.: 2009-114/000-005	2009-114
	WMB-Inline; for Smart Printer; on reel; stretchable 4 - 4.2 mm; plain; snap-on type	/000-005
	Item no.: 2009-114/000-006	2009-114
	WMB-Inline; for Smart Printer; on reel; stretchable 4 - 4.2 mm; plain; snap-on type	/000-006
	Item no.: 2009-114/000-007	2009-114
	WMB-Inline; for Smart Printer; on reel; stretchable 4 - 4.2 mm; plain; snap-on type	/000-007

02.05.2019 Page 3/8