Wagan WXY10010 Owner Manual
Item No. / Artículo No : 8589-9
RoHS
compliant
Solar + LED Floodlight 2000
Solar + Làmpara LED 2000
Us er’s Ma nu al / Manual de Usuario
We are constantly improving our products so specifications are subject to change
without notice. Visit our website for the latest product information.
Estamos mejorando nuestros productos constantemente, por lo tanto, las
especificaciones están sujetas a cambios sin previo aviso. Visite nuestro sitio
web para obtener la información más reciente de los productos.
Solar + LED Floodlight 2000 by Wagan Tech
①
®
Thank you for purchasing the Solar + LED Floodlight 2000 with Remote Control
by Wagan Tech®. With normal care and proper treatment, it will provide years of
reliable service. Please read all operating instructions carefully before use.
⑧
⑨
⑩
⑦
②
③
⑤
④
⑧
⑥
1. Solar panel
2. Light panel
3. PIR detector
4. Timer indication LED
5. Mounting plate
6. Remote control
1
7. U-bolt
8. M6 big flat washer
9. M6 spring washer
10. M6 nut
11. Expansion bolt
www.wagan.com
User’s Manual—Read before using this equipment
SPECIFICATIONS
Solar panel 6.5W, 10 year life span
Battery 3.7V, 13000 mAh, Li-ion
LED count 30
Brightness (Lumens) Up to 2000 lm
Recharge time 10 hours bright sunlight
Lighting time More than 3 nights (Dim lighting mode)
PIR sensor 16–26 ft (5~8 m), 120°
Waterproof IP65
Install height 8–11 ft (2.5~3.5 m)
Materials Aluminum, Poly-carbonate
Size 18.0 × 9.7 × 3.4 inches
Working temperature −13 °F to 149 °F (−25 °C to 65 °C)
Warranty 1 year
(450 × 246 × 86 mm)
FEATURES
• Flexible installation: pole or wall mounted.
• Wide area lighting
• Adjustable installation angle
• Remote control function can choose lighting time and brightness.
©2019 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
2
Solar + LED Floodlight 2000 by Wagan Tech
®
APPLICATIONS
Suitable for outdoor wall or pole installation in plazas, parks, gardens,
courtyards, streets, walkways, pathways, campuses, airfields, farms, and
perimeter security.
INITIAL ACTIVATION
Activate the light by pressing the button on the underside of the light for 3
seconds. The light will come on for 5 seconds before turning off. To deactivate,
press and hold the button for 3 seconds. Otherwise, use the remote control to
switch it on or off.
3
www.wagan.com
User’s Manual—Read before using this equipment
M6 big flat washers
DEVICE INSTALLATION
Pole installation
As the below image shows: Take out the bolts and washers from the accessories
bag for pole installation and attach the light to the pole with the U-bolts.
M6 spring washer
M6 nut
Wall installation
First, remove the U-bolts. Make 4 holes in the wall and take out the expansion
bolt and washer. Attach the light onto the wall.
M6 big flat washers
M6 spring washer
M8 nut
Expansion bolts
U-bolts
Please install the solar panel in a place without any shade and facing direct
sunlight for better charging.
©2019 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
4
Solar + LED Floodlight 2000 by Wagan Tech
①
®
After installation, the light angle can be adjusted.
As shown in the diagram below, there are 3 different available angles.
②
③
15°
DEFAULT OPERATION
By default the light is off during the day and comes on automatically at night.
Without programming, it operates in motion detection mode M1 (described later).
5
www.wagan.com
°
30
User’s Manual—Read before using this equipment
REMOTE CONTROL
The remote control uses 2 AAA batteries (not included)
Brightness control
Motion detection control
On/Off buttons
Timer control
PROGRAMMING THE LIGHT WITH THE REMOTE CONTROL
On/Off
ON: Turns on the light. When you first turn on the light, the initial default lighting
mode is motion detection mode M1 .
OFF: Turns off the light and saves the last lighting mode.
If you turn the light off one night, it will not come on the next night. You need to
press the ON button to turn it on for the next night.
©2019 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
6
Solar + LED Floodlight 2000 by Wagan Tech
®
There are 3 main modes the light can be operated in:
Motion Detection, Brightness Override and Timer mode.
Motion Detection
• M1 (default mode): Steady on at 10% brightness and then 100% brightness
when motion is detected by the PIR sensor. 30 seconds after motion ceases,
the light returns to 10% brightness.
• M2: Steady on at 30% brightness and then 100% brightness when motion
is detected by the PIR sensor. 30 seconds after motion ceases, the light
returns to 30% brightness.
8m
8m
Brightness Override
A constant brightness can be selected by pressing one of the four brightness
buttons on the remote. This will override the motion detection modes (M1 or M2).
• 10% - 200 lumens
• 30% - 600 lumens
• 60% - 1200 lumens
• 100% - 2000 lumens
The light will remain at the set brightness until dawn, the end of the timer mode
(see next section) or until battery is low. If the battery is too low during the night
7
www.wagan.com
Loading...