Item No. : 7312
12V Direct Drive Air Compressor 88
We are constantly improving our products so specifications are subject to change
without notice. Visit our website for the latest product information.
User ’s M anual
12V Direct Drive Air Compressor 88 by Wagan Tech
Thank you for purchasing the 12V Direct Drive Air Compressor 88 by Wagan
Tech®. With normal care and proper treatment, it will provide years of reliable
service. Please read all operating instructions carefully before use.
®
SPECIFICATIONS
Maximum Pressure 100 PSI
Air Hose Length 30 in.
DC Cord Length 10 ft
Power Required 12V 15A DC
Flow Rate 0.88 CFM (25 LPM @ 0 PSI)
Dimensions 7.4 × 5.0 × 2.6 (in.)
Weight 3.0 lbs
FEATURES
• Compact and powerful
• Easy-locking air nozzle
• Adapter tips for balls and inflatables
CAUTION
• Do not overheat the unit! If the compressor is not pumping a steady stream
of air and appears sluggish or if metal fittings get too warm to the touch,
these are indicators that the compressor has been in operation for too long.
Immediately turn off the compressor and allow it to cool for approximately
1
www.wagan.com
User’s Manual—Read before using this equipment
Unlocked Position Locked Position
Thumb Latch
30 minutes before resuming operation. Never leave compressor unattended
while in use.
• Do not over inflate items beyond their needs. Most car tires will inflate
properly between 30 and 35 psi depending upon the tire. Some racing
bicycle tires require pressure in excess of 75 psi. Other bicycle tires may
require substantially lower pressures. This unit is not fitted for high-pressure
tires such as those used on large commercial trucks.
• Keep out of reach of children.
OPERATION
1. To achieve optimal performance, your vehicle’s engine should be running
when operating your air compressor.
2. Insert the DC plug into the 12V cigarette lighter socket of your vehicle.
3. For vehicle tires: Unlock thumb latch of air nozzle by moving to vertical
position (see diagram below) and place air nozzle over valve stem of tire.
For other inflatable items: Select the appropriate adaptor and insert it
into the unlocked air nozzle. Lock air nozzle with thumb latch. Tip: When
inflating athletic balls, moisten needle before inserting it into the ball valve.
4. Push air nozzle down firmly onto valve stem and quickly lock into place by
pressing thumb latch to horizontal position.
©2017 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
Air Nozzle
2
Loading...