Wadia Digital, LLC. 2 Chambers Street Binghamton, New York 13903-2699
Phone: 607-723-3539 Fax: 607-724-0549 www.wadia.com
m330 media server
Owner’s Manual
2
The lightning ash with arrowhead, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING - TO REDUCE RISK
OF FIRE OR ELECTRICAL
SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
To prevent the risk of electric
shock, do not remove cover or
back. No user-serviceable parts
inside.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the pro-
vided plug does not t into your outlet, consult
an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specied by
the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table specied by the manufacturer, or sold with the apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus
has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
15. Do not expose this equipment to dripping or
splashing and ensure that no objects lled with
liquids, such as vases, are placed on the equipment.
16. To completely disconnect this equipment from
the a.c. mains, disconnect the AC / DC Adapter
from the a.c. receptacle.
17. The mains plug of the power supply cord shall
remain readily operable. If the AC /DC Adapter
is provided with a mains power supply cord
attachment, the plug of this power supply cord
shall remain readily operable.
18. Do not expose batteries to excessive heat such
as sunshine, re or the like.
19. Connect mains power supply cord only to a
mains socket outlet with a protective earthing
connection.
20. Warning: The Ethernet connector of this
equipment must not be directly connected to
a public network. Connection is to be made
only by way of a modem or router approved
for this purpose.
IMPORTANT SAFETY
INSTRUCTIONS!
PLEASE READ THEM BEFORE
OPERATING THIS EQUIPMENT.
3
WARNING
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
The remote control supplied with this product contains
a coin/button cell battery. If the coin/button cell battery
is swallowed, it can cause severe internal burns in just
2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment
does not close securely, stop using the product and keep
it away from children. If you think batteries might have
been swallowed or placed inside of the body, seek immediate medical attention.
1. Press the tab and lift up on the Battery Cover and
temporarily place it aside.
Refer to figures 2 and 3.
2. Refering to figure 6, press
on the bottom edge of the
battery to release the battery
from the molded battery
socket. Then remove the
battery from inside of the
Remote Control.
3. Reinstall the Battery Cover.
4. Store the battery in a cool dry place
for future use or dispose of the battery
in accordance with the local regulations for lithium battery disposal. Batteries should never be thrown away or
incinerated.
The Wadia m330 Remote Control uses a long life Lithium Coin Cell type battery. The m330 may be supplied with a battery depending on the country where
the m330 is purchased. When purchasing a battery for
use in the m330 refer to the following list:
Approved Lithium Batteries
Brand IEC No. ANSI/NEDA No.
Energizer CR2032
1
5004LC
1
Panasonic CR2032(PA/1B)15004LC
1
1
CR Lithium Coin Cells contain Perchlorate Material - special handling
may apply. For additional information go to www.dtsc.ca.gov/hazaedous
waste/perchlorate/index.cfm
Access to the recessed battery compartment is located
on the Rear of the Remote Control. Refer to figure 1.
Perform the following steps to install the battery:
1. Press the tab towards the bottom edge of the
Remote Control and lift up on the Batter y Cover
and temporarily place it aside. Refer to figures 2
and 3.
The life of the Lithium Battery used in the Wadia
Remote Control is dependent on the actual amount of
use. It is advisable to remove the battery from the Remote Control when it is not to be used for an extended
period of time. This will help to extend battery life
and avoid possible damage to the Remote Control.
Perform the following steps to remove the battery
from the Remote Control:
2. Remove the CR2032 Battery from
its packaging.
3. Orient the battery so the + symbol
(engraved into one side of the bat-
tery) is facing up.
4. Refering to figures 4 and 5, insert
the battery into the socket. Make
sure the battery is touching both
contact points and is seated in the
socket.
5. Reinstall the Battery Cover.
6. The Remote Control is now ready for operation.
Battery Installation and Replacement
Battery Installation
Battery Removal
CAUTION:
Danger of explosion if the battery is incorrectly installed. Only install one of the
approved Lithium Batteries listed below.
Figu re 1
Battery
Compartment
Figu re 2
TAB
Figu re 3
LIFT
UP
Figu re 5
C
R
2
0
3
2
CR2032
3V
Figu re 4
C
R
2
0
3
2
Contact
Points
Battery
Figu re 6
4
Your decision to own this Wadia m330 media server
ranks you at the very top among discriminating music
listeners. You now have the best. The Wadia dedication to precision performance assures many years of
musical enjoyment.
Please take a short time to read the information in this
guide. We want you to be as familiar as possible with
all the features and functions of your new Wadia.
Thank You
Please Take A Moment
Technical Assistance
If at any time you have questions about your Wadia
product, contact your Wadia Dealer who is familiar
with your Wadia equipment and any other brands that
may be part of your system. If you or your Dealer
wish additional help concerning a suspected problem,
you can receive technical assistance for all Wadia
products at:
Wadia Digital, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3512
Fax: 607-724-0549
Customer Service
If it is determined that your Wadia product is in need
of repair, you can return it to your Dealer. You can
also return it to the Wadia Digital Service Department. For assistance on factory repair return procedure, contact the Wadia Service Department at:
Wadia Digital, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
The serial number, purchase date and Wadia Dealer
name are important to you for possible insurance
claim or future service. The spaces below have been
provided for you to record that information:
Serial Number: _______________________________
Purchase Date: _______________________________
Dealer Name: ________________________________
Copyright 2015 © by Wadia Digital, Inc.
Safety Instructions ............................................................... 2
Thank You and Please Take a Moment ...............................3
Technical Assistance and Customer Service ....................... 3
Table of Contents ................................................................. 3
General Information ............................................................ 4
Connector and Cable Information ....................................... 4
Introduction .........................................................................5
Performance Features .......................................................... 5
Dimensions .......................................................................... 6
Installation ...........................................................................7
Rear Panel Connections .......................................................8
AC/ DC Ada pter ...................................................................9
m330 Connections ........................................................ 10 -11
Front Panel Display and Push-button ................................ 12
How to use the Remote Control ......................................... 13
How to Operate the Setup Mode .................................. 14-15
How to Operate the m330 .............................................16-20
Specifications ............................................................ 22
Packing Instructions ................................................. 23
Table of Contents
The Wadia m330 incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights.
Trademark and License Information
5
A 3.5mm stereo mini phone plug is used for connection to the Trigger Control Jacks.
Ethernet RJ45 Socket
1. Transmit Data (+) 5. N/C
2. Transmit Data (-) 6. Receive Data (-)
3. Receive Data (+) 7. N/C
4. N/C 8. N/C
Ethernet Cable - Straight Thru Connections
Pin Number - Wire Color Pin Number - Wire Color
1. Orange/White → 1. Orange/White
2. Orange → 2. Orange
3. Green/White → 3. Green/White
4. Blue → 4. Blue
5. Blue/White → 5. Blue/White
6. Green → 6. Green
7. Brown/White → 7. Brown/White
8. Brown → 8. Brown
concerning battery disposal.
8. If it should become necessary to replace the supplied AC / DC Power Adapter,
order part number 32056300
from the Wadia Parts Department.
9. For additional information on
other Wadia Products and the downloadable m330
“Advanced Setup and Operation Guide” please
visit the Wadia Web Site at www.Wadia.com.
10. Mobile Device Apps, for remote control operation of the m330, were not available at the time
this Owner’s Manual was printed. When the Apps
become available, an announcement will be made
on the Wadia Web Site at www.Wadia.com/en-us/
products/m330. Please note, for remote operation
via mobile devices the m330 needs to be connected to a home network with wi-fi capabilities.
1. For additional connection information, refer to the
owner’s manual(s) for any component(s) connected
to the m330 Media Server.
2. When the m330 Media Server is connected to an
audio system, playback of music already stored
on it may be listened to. To take full advantage
of the many features the m330 is capable of, such
as importing and storing additional music on the
Media Server, requires connection to a Computer
Network System.
3. For best performance, the speed of the Computer
Network the m330 Media Server would be connected to should be 1 Gigabit or faster.
4. The m330 internal Digital to Analog Converter
Circuitry is designed to decode 2-channel PCM
(Pulse Code Modulation) Digital Signals. The
Digital Output Signal present at the Coaxial and
Optical Output Connectors is a 2-channel PCM
(Pulse Code Modulation).
5. The m330 is designed to be compatible with the
majority of Audio Power Amplifiers. However,
do to a wide range of Power Amplifier Designs, it
is important the input sensitivity of the amplifier
be at least 2 Volts. This will assure the playback
of most music recordings are reproduced with
adequate dynamic range. Check with your Wadia
Dealer for additional information.
6. The IR Input, with a 3.5mm mini phone jack, is
configured for non-Wadia IR sensors such as a
Xantech Model HL85BK Kit. Use a Connection
Block, such as a Xantech Model ZC21, when two
or more IR sensors need to be connected to the
m330.
7. When discarding the unit, comply with local rules
or regulations. Batteries should never be
thrown away or incinerated but disposed
of in accordance with the local regulations
General Information
Connector and Cable Information
XLR Connectors
Below is the Pin configuration for the XLR Balanced
Output Connectors on the m330. Refer to the diagram
for connection:
PIN 1: Shield/Ground
PIN 2: + Output
PIN 3: - Output
Trigger Control Connector
The Trigger Input Jack receives Power On/Off Signals
(+12 volt/0 volt) when connected to other Wadia Components.
The Trigger Output Jack sends
Power On/Off Signals (+12
volt/0 volt) when connected
to other Wadia Components.
PIN 1
PIN 2
Pin 1
Pin 8
Pin 1
Pin 8
Trigger
Control
Ground
N/C
6
General Information, Cable Information, Disc Information, Introduction and Performance Features
Introduction
Performance Features
• Built-in Networking Capability
The m330 has the ability to connect to an existing network for connecting to other devices also connected to
the network, including the Internet (the Cloud).
• High Storage Capacity
The m330 incorporates a massive 1 Terabyte Hard
Drive capable of storing the contents of a large Music
Collection.
• Expand the Music Server System
The m330 can provide seamless access to music
contained on other m330(s) from different physical
locations. It can also access music stored on other devices such as Computers and NAS (Network Assisted
Storage) Devices connected to the same network as
the m330. This provides for unlimited music storage
capacity.
• USB 3 and USB 2 Inputs
Connect external storage devices to the m330 for
increased music storage capacity.
• Graphical User Interface
When connected to a TV/Monitor, the On Screen
Display provides information such as Album Name,
Artist Name, Song Name, Playing Time and Location
for each of the selections. This allows for easy song
selection from multiple rooms in your home.
• HD Video Outputs
The m330 has DVI-I and HDMI Connections for
providing High Definition Video Signals of 1080p or
720p resolutions.
• Internet Streaming Services
The m330 also allows for listening to Internet Radio
Stations when connected.
• Local AM/FM Radio Stations
The m330 also allows for listening to local AM/FM
Stations via the Internet.
• Select your Music
Listen to the music you want by creating your own
play lists and/or groups of music types.
• Digital Audio Outputs
There is a Coaxial and an Optical Digital Audio Output for connection to other components.
• Balanced and Unbalanced Analog Outputs
The m330 has both Unbalanced Outputs and Balanced
Outputs which permit long cable lengths without a
loss in sound quality.
• On Screen Setup
The On Screen Setup allows for customizing various
settings such as audio, video, network and external
control to match the components in your system.
• Trigger Control
The Trigger Input connection provides convenient
Turn-On/Off of the m330 when connected to a Wadia
System with Trigger Outputs.
• Remote Control
The Remote Control provides control of the m330
operating functions.
• LED Front Panel Indicator
A long life Light Emitting Diode (LED) is used to
indicate the On/Off m330 status.
• Die Cast Aluminium Chassis
Maintains cool operating temperatures of the internal
circuitry by the heat dissipating properties of the die
cast aluminium chassis. The aluminium chassis with
illuminated top glass panel is very durable and will
retain its appearance for many years to come.
The Wadia m330 Media Server offers the latest in audio technology, providing state of the art audio reproduction with the convenience of instant access to your
music library. When the m330 is added to a Wadia
System, the music from this source may be enjoyed in
your home. The advanced design ensures many years
of smooth trouble free operation.
7
Dimensions
The following dimensions can assist in determining
the best location for your m330.
Dimensions
Side View of the m330
Front View of the m330
17-
7/8"
45.4cm
2-7/8"
7.3cm
3-3/8"
8.6cm
17-7/8"
45.4cm
16-7/16"
41.8cm
Rear View of the m330
17-
7/8"
45.4cm
16-7/16"
41.8cm
8
Installation
Installation
The m330 is designed to be placed upright on a table
or shelf, standing on its feet. The ventilation requirements are shown.
Always provide adequate ventilation for your m330.
Cool operation ensures the longest possible operating
life for any electronic instrument. Do not install the
m330 directly above a heat generating device, such
as a Power Amplifier. Allow at least 2 inches (5.1cm)
above the top, 5/8 inches (1.6cm) below the bottom
and 1 inch (2.5cm) on each side of the m330, so that
airf low is not obstructed. Allow 20 inches (50.8cm) of
depth for airflow and cable connections.
m330 Side View
20"
50.8cm
m330 Front View
2"
5.1cm
1"
2.5cm
1"
2.5cm
2"
5.1cm
9
TRIGGER IN receives turn-on
signals from a Wadia component and
TRIGGER OUT sends turn-on signals on to another Wadia Component
Connect the supplied
AC/DC Power Adapter
(Refer to the illustrated
of the Adapter below)
COAXIAL and OPTICAL AUDIO
OUTPUTS send a Digital Audio
Signal to a Preamplifier or an A/V
Control Center with a D/A Converter
or a decoder
BALANCED AUDIO OUTPUTS supply analog audio
signals to connect to Balanced
Inputs of other components
UNBALANCED AUDIO
OUTPUTS supply analog
audio signals to Unbalanced
Inputs of other components
Rear Panel and AC/DC Adapter Connections
USB3 (version 3)
for connection of an
external storage device
capable of transferring
data at high speed
DVI (Digital Video Interface)
Output for connecting to a
HDTV or Monitor with a DVI
Input Connector with a video
resolution 720p or 1080p
HDMI (High-Definition Multimedia
Interface) Output (Audio and Video
Digital Signals) for connecting to
a HDTV or Monitor with a HDMI
Input with a video resolution 720p or
1080p
eSATA (Exter nal Serial ATA)
for connection of an exter nal
storage device capable of transferring data at very high speed
NETwork Connector for
connecting the m330 to
a Broadband Ethernet
Network
USB (version 2)
for connection of
an external storage
device capable of
transferring d ata
Connect to the DC IN
connector on the Rear
Panel of the m330
Media Server
Connect to a live AC outlet (always On)
using the supplied AC Power Cord. Refer to information on the power supply
to determine the correct voltage.
AC/DC Power Adapter supplied
with the m330 Media Server
10
m330 Connections
The m330 has the ability to be remotely switched On/
Off from a Wadia Digital Decoder, Preamplifier or
A/V Control Center via the Trigger Control connection. The connection instructions below together with
the m330 Connection Diagram on the next page is
an example of a typical audio or audio/video system.
Your system may vary from this, however the actual
components would be connected in a similar manner.
For additional information refer to “Connector and
Cable Information” on page 4.
Trigger Control Connections:
1. Connect a Control Cable from the Digital Decoder, Preamplifier or A/V Control Center Trigger
Out Jack to the TRIGGER IN Jack on the Wadia
m330 Media Server.
2. Optionally, connect a Control Cable from the
m330 Media Server TRIGGER OUT Jack to another component.
3. Connect any additional components in a similar
manner, as outlined in steps 1 thru 3.
Digital Audio Connections:
4. Connect a Cable from the Wadia m330 Media
Server AUDIO OUTPUT SPDIF Optical output to
the Digital Optical 1 Input on the Digital Decoder,
Preamplifier or A/V Control Center.
Note: A Coaxial connection may be used instead of
the Optical Connection.
Digital Video Connections:
5. Connect a HDMI Cable between the HDMI Socket
on the Rear Panel of the m330 Media Server to a
HDMI Input Socket on the HD Monitor/TV.
Note: If the HD/Monitor/TV has a DVI Input
instead of a HDMI input, then connect a DVI
cable between the m330 and the HD/Monitor/
TV.
Network Connections:
6. Using a CAT 5/6 Ethernet Cable, connect the cable
from the Router to the NET (Network) connector
on the Rear Panel of the m330.
7. Optionally, Connect another CAT 5/6 Ethernet
Cable from the Computer (Network Connector) to
the Router.
Note: For additional information on Networks and
Network Connections refer to the documentation supplied with the Router and Computer.
AC Power Cords Connections:
8. Locate the plug at the end of the cable coming out
of the supplied AC/DC Power Supply and connect
it to the DC Input connector on the Rear Panel of
the m330 Media Server.
9. Connect the supplied AC Power Cord between the
socket on the AC/DC Power Supply and a live AC
outlet (that is always On).
11
m330 Connections
Optional Computer
Network Router
(Wireless or Wired)
Digital Decoder
m330 supplied
AC/ DC
Power Supply
Connect to a
live AC Outlet
(always On)
Connect to a
live AC Outlet
(always On)
HD Monitor/TV
12
Front Panel Display and Push-button
STANDBY/ON Push-button with indicator
switches the m330 ON or OFF (Standby)
and resets the microprocessors
IR Sensor receives commands
from a Remote Control
13
How to use the Remote Control
Starts playback, pauses
playback and used to
select a menu choice or
menu item
Directional Left
Push-button and
used to select the
previous selection
Moves forward in time
through a selection
Momentarily press
to Power the m330
ON or OFF
Directional Right
Push-button and
used to select the
next selection
Selects available
information
Selects a Menu
Current selection
is liked
Current selection
is disliked
Directional Up
Push-button and
used to increase
the volume level
Reserved for
future use
The Remote Control is capable of performing most
Operating Functions for the m330 Media Server.
Note: Refer to the “How to Operate” Section of this
manual for additional information using this
Remote Control.
Dual Function Push-buttons
The four push-buttons in the ellipse dashed area of
the Remote Control, are dual function. When music
is playing, the (+) Push-button increases the volume
level
1
and the (-) Push-button decreases the volume
level
1
. Push the : Push-button for the next selection
or push the 9 Push-button for the previous selection.
During the time a m330 Menu is being accessed,
the push-buttons at the front/top of the Remote
Control provide the ability to navigate the menus and
select the desired choice or function. The (+) Push-button is used to move the cursor Up through the menu.
Likewise, the (-) Push-button is used to move Down.
The 9 Push-button is used to move to the left, the :
Push-button is used to move to the right and the
► is
used to select the highlighted choice.
How to use the Remote Control
1
Adjusting the volume level using the Remote
Control rst requires a change to the default setting
located in the Setup Mode, refer to pages 16 and 17
for additional information.
Directional Down
Push-button and
used to decrease the
volume level
Directional Push-buttons
14
is displayed. When a firmware update is available,
click on the “Release Notes” button. A new window will appear containing addition information
about the update and how to proceed.
5. To exit out of the setup mode, first save any
changes made by clicking on the “Save Changes”
button and then close down the Internet Web
Browser Application.
6. Proceed to “How to Operate” starting on page 18,
or to switch Off the m330, press the STANDBY/
ON Push-button on the Front Panel or press the
(Power) Push-button on the Remote Control.
Note: If the “Server IP Address” number appears
as 0.0.0.0, the m330 was unable to obtain an
IP Address from the computer network. Power
down the m330, wait several minutes and then
Switch it back On. If the m330 is still unable
to obtain an IP Address, the default automatic
configuration setting (DHCP, Dynamic Host
Configuration Protocol) might have to be set
manually. Contact your Computer Dealer and/
or the manufacture of the computer/network
hardware for assistance.
3. Using a computer connected to the same network
as the m330, launch an Internet Web Browser
Application (such as Windows Internet Explorer).
Type in, on the “URL-Address line”, the following:
The IP Address Number written down in step 2
HTTP://__.__.__ _._ __/config
Then press enter on the computer keyboard. Refer to
figure 3. There are selection tabs located across the
top of the window (Server Settings, Display Settings,
Source Settings, Contents, Source Settings and Firm-
ware). Each of the tabs have subheadings with current
status information along with various setup options.
There are explanations located to the right of the various options and settings.
4. Click on the “Firmware” Tab (located on the top
right side). The current running firmware version
Your Wadia m330 has been factory configured for
default operating settings that will allow immediate
enjoyment of superb audio without the need for further adjustments. If you wish to make changes to the
factory default settings, a Setup Feature is provided to
customize the operating settings using a PC Computer
(not supplied) and the m330 connected to a HD Monitor/TV. Refer to the m330 Remote Control Illustration and Operation on page 13, while performing an
introduction into operating the Setup Mode, follow the
st e ps b elow.
1. Press the STANDBY/ON Push-button on the Front
Panel or press the (Power) Push-button on
the Remote Control to switch On the m330. The
LED above the STANDBY/ON Push-button will
illuminate. The m330 will go through a startup
initialization of which might take upwards of 1.5
minutes with the connected HD Monitor/TV indicating the progress. Refer to figure 1.
2. When the initialization has completed, the operational screen will appear and in the upper left corner is the “Server IP Address: _ _ . _ _. ___. ___.
Write down the IP Address Number, as it will be
used in the next step. Refer to figure 2.
How to Operate the Setup Mode
Figu re 2
IP Address location
Figu re 3
Figu re 1
15
Slacker Radio
Spotify
TuneIn Radio
Additional TuneIn Radio Stations
Source Settings
Media Schedule:
Name, Status, Triggers, Next Start Time, Last
Start Time and Action
Firmware
Firmware Update:
You are running rmware _._._____._ Release
Other software:
Media Server Client
License:
Media Server Client
Support:
Remote Support
Display Order:
Picture duration:
Scale:
Show Now Playing:
Show song overlay:
Source Settings
Server Audio Outputs:
Name
Form factor
Gain
Format
Control System:
AirPlay:
Password
Contents
Album Art:
Media Synchronization:
Wadia Media Sync for Windows
(Install Software Application on PC Computer)
Wadia Media Sync for MAC OS
(Install Software Application on Apple Computer)
Computers
Storage:
Volumes (External USB or E-Sata Drives)
Name (Built in storage total size and free)
Network Content:
NAS Synchronization
Network Content:
NAS Synchronization
Online Credentials:
Amazon Cloud Drive
iTunes
MP3tunes
Pandora Internet Radio
Rhapsody
SiriusXM Internet Radio
Server Settings
Server Identication:
Name
Description
Conguration Security:
User
Password
Recovery email address
Remote Control Security:
User
Password
Recovery email address
Date and Time:
Time Zone
NTP Server
Wired Ethernet:
Connection
Storage:
82.47% available of 931.51 GB total
Logging:
Your email
Comments
Utilities:
Restart your server
Display Settings
Screen Resolution:
720p - 1280x720
1080p - 1920x1080
On screen display:
Source
Screen Saver:
Enabled
Timeout (seconds)
Slide Show:
Effect in
Effect out
Setup
16
2. To switch Off the m330,
press the STANDBY/ON
Push-button on the Front
Panel or press the (Pow-
er) Push-button on the
Remote Control. Refer to
figures 22 and 23.
How to Playback Music
Music was imported into the
m330 Media Server, at the factory, for your enjoyment. To start
listening to the music, perform
the following:
1. Press the (MENU) Push-
button on the Remote Control to select the operation Menu. Then using the - (Dow n) Push-button
on the Remote Control, select the Music Menu followed by pressing the ► (ENTER) Push-button.
Refer to figures 23, 30 and 31.
Power On and Off
Your Wadia m330 has been factory configured for
default operating settings that will allow immediate
enjoyment of superb audio without the need for further adjustments. Refer to the m330 Remote Control
Illustration and Operation on page 13, while performing an introduction into operating the Setup Mode,
follow the steps below.
1. Press the STANDBY/ON Push-button on the Front
Panel or press the (Power) Push-button on the
Remote Control to switch On the m330. The LED
above the STANDBY/ON Pushbutton will illuminate. The m330
will go through a startup initialization which might take upwards
of several minutes with the m330
indicating the progress on the connected HD Monitor/TV. Refer to
figures 20 thru 24.
How to Operate the m330
Figu re 22
Figu re 24
2. Press the ► (ENTER) Push-button on the Remote Control to view the available Albums. Refer
to figure 32.
3. Use the + (Up) or - (Down) Push-button on
the Remote Control to select the desired album. In this instance, select “Various Artists Beethoven:Symphonies. Then press the
► (EN-
TER) Push-button to select the album. Refer to
figu re 33.
Figu re 31
Figu re 32
Figu re 30
Fig ure 21
Figu re 23
Figu re 20
17
2. Press the ► (ENTER) Push-button on the Remote Control to select the Streaming Menu. Refer
to figure 41.
There are many pre-setup Internet Radio Sites to
choose from, including Pandora, SiriusXM, Slacker,
etc. Some Internet Radio Sites require registering and
in some instances a subscription fee in order to enjoy
their music services. Using the m330 Setup Mode on
pages 16 and 17, refer to the Contents tab and then the
Online Credentials for additional information. In the
following example, TuneIn Radio will be selected to
stream music from local FM/AM radio stations.
3. Using the + (Up) or - (Down) Push-button on the
Remote Control, select TuneIn Radio from the
menu. Refer to figure 42.
4. Referring to figure 43 (on the next page), press the
► (ENTER) Push-button to select Local Radio.
again. To see the status of the track currently playing, press the MENU Push-button and refer to
information located at the bottom of the screen.
Refer to figure 34 and 35.
4. Referring to figure 34, the track for the album just
selected will appear. In this instance there is one
track “ Symphony No. 9 (Scherzo). Refer to figure
34. Press the
► (ENTER) Push-button on the
Remote Control to start playback of the first track.
Refer to figure 35.
The TV/Monitor will start to display various scenes
while the music is playing. Refer to figures 36 and 37.
5. To pause playback of the music, press the ►
(ENTER) Push-button on the Remote Control. To
resume playback, just press the same Push-button
Figure 33
Figure 35
Figu re 36
Figu re 37
Figure 34
How to Stream Music
The m330 Media Server provides access to virtually
unlimited music by streaming music from the Internet.
To start streaming music from the Internet, perform
the following:
1. Press the (MENU) Push-button on the Remote Control to select the Home Menu. Refer to
figure 40.
Figu re 40
Fig ure 41
How to Operate the m330
Figu re 42
18
2. A connection progress indicator will appear in the
Web Browser. Refer to figure 61.
3. When the connecting process is completed, the
Media Server interface will appear in the Web
Browser. Refer to figure 62.
The operation of the m330 using the Web Browser is
similar to using the m330 connected a monitor/TV
along with the supplied Remote Control. The major
difference is the computer pointing device (mouse) is
used for selection and navigating.
On the left side is a column of buttons for select-
ing music sources (Streaming, Local Music, Favorites,
Playlists and Queue) along with Back and Next control
commands. Along the bottom are buttons for standard
control functions such as Previous, Play, Pause, Next,
Shuff le and Replay.
5. There are now menu choices AM, FM or Internet
only radio stations. Referring to figure 44, use
the + (Up) or - (Down) Push-button to select FM,
followed by pressing the the
► (ENTER) Push-
button. Refer to figure 45.
6. Following the same procedure as in step 5, select
the second choice, “89.3 WSKG-FM (classical)”.
The sound from the station will start, figures 46
and 47 will appear in sequence on the TV/Monitor.
Figu re 44
Figu re 45
Figu re 46
Figu re 47
After the m330 has powered up and completed initialization, note the IP Address assigned to the Media
Server in the upper left corner. Refer to figure 60.
1. Using a computer connected to the same network
as the m330, launch an Internet Web Browser
Application (such as Windows Internet Explorer).
Type in on the “URL-Address line” the following:
The IP Address Number
HTTP://__.__.__ _._ __/MediaServer
Figure 60
IP Address location
Fig ure 61
How to Operate the m330 via a Computer
How to Operate the m330, con’t
Figu re 62
Figu re 43
19
To start streaming music from the Internet, perform
the following:
1. Click on the Streaming button and the Radio
sources menu will appear. Refer to figure 65.
In the following example TuneIn Radio will be selected to stream music from local FM/AM radio stations.
2. Select and click on TuneIn Radio. Click on Local
Radio followed by selecting FM. Refer to figures
66 and 67.
3. Referring to figure 68, select the second choice,
“89.3 WSKG-FM (classical)”. The sound from the
station will start and figure 69 will appear.
How to Playback Music
Wadia Music was imported into the m330, at the
factory, for your enjoyment. To start listening to the
music, perform the following:
1. Click on the Local Music button. Refer to
figure 62.
2. Click on “Albums”, then select “Beethoven”. Refer
to figure 63.
3. Click on the track listing of “1 Symphony No. 9
(Scherzo) 1:15” and click on “Play now”. Refer to
figures 63 and 64.
4. Return to the previous menu selection of “Play
now, Play next, Replace queue, Add to queue or
Add to playlist” by clicking on the Track (Name)
currently playing.
How to Stream Music
The m330 Media Server provides access to virually
unlimited music by streaming music from the Internet.
How to Operate the m330, con’t
Figu re 63
Figu re 64
Figu re 65
Figu re 66
Figu re 67
Figu re 68
Figu re 69
20
6. To listen to the music just imported (when the im-
porting process is complete) enter into the “URL-
Address line” below:
The IP Address Number
HTTP://__.__.__ _._ __/MediaServer
7. Then select local music, click on albums, selecting the desired music, followed by selecting either
“Play all” or the desired track. Refer to figures 86
and 87.
Referring to figure 82, the “Volumes” window indi-
cates both the m330 internal storage drive (931.51GB)
and an external connected drive (7.35GB).
4. Click on the word “Import” and a window will appear with additional information about the importing process. Refer to figure 83.
Note: The import process will copy all of the music
files it finds on the externally connected storage drive. Depending on the amount of music
files on the drive, the copying process could
take some time.
5. Start the import process by clicking on the button “OK, Import the volume”. Refer to figures 84
and 85.
How to Import Music from External Drives
Before proceeding with the steps below, switch power
Off to the m330. Then connect the External Drive
(HDD or SDD) to an USB or eSata connector on the
Rear Panel of the m330. After the m330 has powered
up and completed initialization, note the IP Address in
the upper left corner.
1. Using a computer connected to the same network
as the m330, launch an Internet Web Browser
Application (such as Windows Internet Explorer).
Type in on the “URL-Address line” the following:
The IP Address Number
HTTP://__.__.__ _._ __/config
2. Then press enter on the computer keyboard. Refer
to figure 80 (partial view).
3. Click on the “Content” Tab (located along the top),
then scroll down to “Storage”. Refer to figure 81.
Figure 80 (pa rtial view)
Fig ure 81
Figu re 84
Figu re 85
Figu re 86
Figu re 87
Figu re 82
Figu re 83
How to Operate the m330, con’t
How to Operate the m330, con’t
21
22
Specications
Audio Specifications
Digital Audio Specifications
Digital Output
Coaxial: 0.5V p-p/75 ohms
Optical: - 15dbm to -21dbm (TOS Link)
Digital Output Format
SPDIF ( PCM1)
Digital Output Sample Rate
Up to 24-Bit/192kHz
1
PCM (Pulse Code Modulation) Digital Signal Type
Power Requirements
Field AC Voltage conversion of the m330 is not possible. The m330 is factory configured for the following AC Voltages:
100-240 Volts, 50/60Hz at 2.0 Amps
Standby: Less than 0.5 watt
Overall Dimensions
Width is 17-7/8 inches (45.4cm)
Height is 3-3/8 inches (8.6cm)
Depth is 20 inches (50.8cm) including the Front Panel
and connection cables.
Wei ght
25 pounds (11.3Kg) net (includes the external Power
Supply), 29.5 pounds (13.3Kg) in shipping carton
Shipping Carton Dimensions
Width is 22-1/2 inches (57.2cm)
Height is 8-1/8 inches (20.6cm)
Depth is 22-1/2 inches (57.2cm)
General Specifications
Fixed Output Level
2.0Vrms Unbalanced
4.0Vrms Balanced
Output Impedance
600 ohms Unbalanced and Balanced
Signal to Noise Ratio
102dB (IHF A-Weighted)
Dynamic Range
96dB
Harmonic Distortion
0.005%
Channel Separation
95dB (1,000Hz)
Video Specications
Signal System
Digital Video
Signal Format
HDMI and DVI
Screen Resolution
720p or 1080p
Power Control Input
5-15VDC, less than 1mA
Power Control Output
12VDC, 25mA maximum total
Trigger Control Specications
23
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as
shown below. It is very important to ensure the proper
equipment location between the bottom and top foam
pads. Failure to do this will result in shipping damage.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition. If
a shipping carton or any of the interior part(s) are
needed, please call or write Customer Service Department of Wadia. Refer to page 4. Please see the Part
List for the correct part numbers.
Quantity Part Number Description
1 034555 Shipping carton only
1 034556 Top foam pad
1 034564 Bottom foam pad
TOP FOAM PAD
BOTTOM FOAM PAD
SHIPPING CARTON
AC POWER CORD
UNIT
OWNER’S
MANUAL
REMOTE
CONTROL
The continuous improvement of its products is
the policy of Wadia Digital who reserve the right
to improve design without notice. Printed in the
U.S.A.
Wadia Digital, LLC
2 Chambers Street
Binghamton, NY 13903
www.wadia.com
Wadia Digital Part No. 04152400
Loading...