Page 1
WALL SHELF
ASSEMBLY MANUAL
We support the proper recycling of waste materials, and
encourage you to properly recycle any leftover or waste
materials. Help us preserve the environment for a better WORLD.
Thank you for choosing our products.
Page 2
Dear Customer,
This product has been extensively tested prior to shipment. However, some components
may be missing or damaged during transportation. If this happens, please send a request
for the missing or damaged parts. Use the included service card to describe the part
completely and we will replace the part as quickly as possible. Before assembling, check
the included parts list to verify all parts are available. Prior to assembly, clean all
components with a damp cloth. Lift the product with a minimum of two people. For longer
distances, carry the product while inside the package, if possible. Product surfaces can be
easily cleaned with a damp and soapy cloth, or household cleaners. Do not expose the
product to direct and extreme heat, cold, or humidity, as this may damage the product.
Page 3
ATTENTION !!!
Minifix is the main connection material used in our products.
Before starting assembly, please check the drawings below...
ACCESSORY LIST
This unit should
be assembled by
two people
A09
4x50 YHB Screw
16x
A08
Ø8 Anchor
A16
Small Sticker
4x
GENERAL VIEW
4x
01
Page 4
ASSEMBLY MANUAL
02
A09
01
02
02
Back
01
4x50
YHB Screw
Ø7 mm
A09
A08
01
01
Page 5
A16
IMPORTANT; The screw supplied with the anti-topple bracket is to be used only for fixing
the anti-topple bracket to the furniture. In addition, you will need to choose a screw or
fitting which is suitable for securing the bracket to the type of walls you have. If you are
unsure about what type of screw to use, contact your local hardware store.
Page 6
• This unit contains small parts which could be a choking hazard for small children.
Children should be under adult supervision at all times.
• Do not overload the unit. Each shelf has a recommended capacity of 13 pounds, and the
total weight on the unit should not exceed 39 pounds for wall shelves.
• Do not climb, step, or stand on the unit.
• Do not mount or attach items to the front, rear, or sides of the unit. This can cause the
unit to become unbalanced and fall.
• Do not stack units.
• All units must be secured individually to wall studs using hardware provided. If wall
studs are not accessible, consult your local hardware store for appropriate mounting
hardware.
• We recommend you hand-tighten screws. Use care not to overtighten if using power
tools. Follow proper safety procedures if using power tools and/or ladders.
• We recommend you protect your work surface during assembly to prevent scratching or
damage to tabletops, wood floors, etc.
• Failure to follow the instructions listed here could result in bodily injury or damage to
personal belongings. Use caution and follow safety procedures.
Loading...