ARMCHAIR AND SOFA SET OF 2
Thank you for purchasing the SOFA!
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the sofa, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of small children.
Hardware:
Component:
1
1
A
B
C
D
Bolt x 8
Spring Washer x 8
Flat Washer x 8
Allen Wrench x 1
2
1
Sofa Body x1
3
Support Leg x1
2
2
3
2
Leg x4
Page 1 of 2
2
STEP 1:
Please find the package of Legs (2) and hardware on the top of the seat.
Then put the Sofa Body (1) upside down on a carpeted or padded area by two adults to make fully visible the corners.
Position one of Legs (B) at one of the four wooden corners.
Insert 2 pieces of Spring Washer (B), Flat Washer (C) into 2 pieces of Bolt (A) as shown.
Then insert assembled 2 pieces of Bolts (A) into the corner to connect the Leg (2).
Use Allen Wrench (D) to tighten the Bolts (A) clockwise until secure.
Repeat the same steps for the other three Legs (2).
Secure the Support Leg (3) to the bottom of Sofa Body (1) as shown.
1
2
A
2
Ax8 Bx8
STEP 2:
Carefully turn over the sofa.
2
D
B
A A
A
C
1
3
2
A
2
Cx8
Dx1
Hardware & Tool required
Assembly is completed. The sofa is ready to enjoy now!
Page 2 of 2
Thank you for purchasing the CHAIR!
Before you start, here i
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the chair/loveseat, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of small children.
s some helpful advice:
Component:
Hardware:
A
B
C
D
1
Bolt x 8
Spring Washer x 8
Flat Washer x 8
Allen Wrench x 1
2
Chair or Loveseat Body x1
1
2
2
2
2
Leg x4
Page 1 of 2
STEP 1:
Please find the package of Legs (2) and hardware on the top of the seat.
Then put the Chair or Loveseat Body (1) upside down on a carpeted or padded area by two adults to
make fully visible the corners.
Position one of Legs (B) at one of the four wooden corners.
Insert 2 pieces of Spring Washer (B), Flat Washer (C) into 2 pieces of Bolts (A) as shown.
Then insert assembled 2 pieces of Bolts (A) into the corner to connect the Leg (2).
Use Allen Wrench (D) to tighten the Bolts (A) clockwise until secure.
Repeat the same steps for the other three Legs (2).
2
Ax8 Bx8
2
A
A
2
D
B
A
A
C
1
1
2
A
2
Cx8
Dx1
Hardware & Tool required
STEP 2:
Carefully turn over the chair
Assembly is completed. The chair
Page 2 of 2
/loveseat is ready to enjoy now!
Loading...