ASSEMBLY INSTRUCTIONS &
PARTS IDENTIFICATION
5 PACK TABLE & CHAIRS
5-Pack Hardware Kit
Table Hardware
Ltr Qty Description
8 pcs
A
B
C
D
8 pcs
8 pcs
1 pc
Flat Washer
Lock Washer
Nut Øm6
Key Wrench
Table Parts Key
No
1
2
3
4
Qty
4 pcs.
4 pcs.
4 pcs.
1 pc.
Description
TableFloor Glide
Leg
Corner Block
Table top
STEP 1
-Carefully lay table top upside down on
a smooth flat surface to prevent scratches.
-Affix a leg to each corner of the table top as shown
in Detail A using a flat washer , lock washer and nut .
-Once all legs are in place, fully tighten the nuts
MADE IN VIET NAM
Detail A
5-Pack Hardware Kit
Chair Hardware
Ltr
A
44 pcs.
B
44 pcs.
C
16 pcs.
4 pcs.
D
16 pcs.
E
12 pcs.
F
4 pcs.
G
24 pcs.
H
No
5
6
7
8
9
10
11
12
* Quantities noted are for a tolal of four chairs.
Chair Parts Key
16 pcs.
4 pcs.
4 pcs.
6
Description
Flat Washer
Lock Washer
Nut Øm6
Key Wrench
Long KD. Bolt Øm6x 75mm.
Short KD. Bolt Øm6x 40mm.
Left Facing Side Stretcher4 pcs.
7
Allen Wrench
Screw Ø4 x 38mm
Description
Chair Floor Glide
Chair Back4 pcs.
Complete Seat
Right Facing Front Leg4 pcs.
Left Facing Front Leg4 pcs.
Right Facing Side Stretcher
Front Stretcher4 pcs.
Detail C
STEP 1
- Carefully lay chair back flat on a smooth flat surface to
prevent scratches.
- Affix the complete seat to chair back, as shown in Detall
A, using a flat washer, lock washer and short KD bolt.
- Secure complete seat to chair back corners, as shown in
Detail B, using a flat washer, lock washer and long KD
bolt. - - Tighten screws with provided Allen Wrench.
Detail A Detail B
8
STEP 2
- Carefully turn Chair upside down and attach each Leg to the front corners of the
Complete Seat. Noting Right and Left Side Leg.
- Place Flat Washer, Lock Washer and Nut on for each bolt, using provided Key
Wrench.
- Do not fully tighten the Nuts at this stage until all the parts are in position (See
Detail C).
- Insert 2 Side Stretchers between the Front Legs and Back Legs(Noting Right and
Left Side Stretcher), and insert the Front Stretcher between the Front Legs; fasten
with Wood Screw using phillíp-head screwdriver. (not provided).(See Detail D)
- Be sure to tighten all screws and nuts prior to using Chair.
E
11
8
10
FABRIC CARE INSTRUCTION
REGULAR CARE:
Wlpe gently using a soft damp cloth and
mid deter gent DO NOT SATURATE.
FABRIC CONTERT:
1OO% p/u vinyl; Cleaning code "W"
5
9
12
Loading...