Page 1
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come
loose inside the carton during shipment.
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come
loose inside the carton during shipment.
No
Description
A
B
C
D
E
F
G
H
Qty
4 pcs
11 pcs
11 pcs
4 pcs
3 pcs
1 pc
1 pc
6 pcs
Hex nut M8
Lock washer Ø8
Flat washer Ø8 x 18mm
Long bolt M6 x 80mm
Short bolt M6 x 40mm
Allen key K4
Key wrench 13
Wood Screw Ø4 x 40mm
STEP 2
DETAIL B
B
C
F D
4 x
DETAIL A
F
E
B
C
3 x
B
A
2
1
C
H
x 6
4
3
5
6
7
8
- Carefully turn chair upside down and attach each Front Leg to the front
corners of the Complete Seat (Keeping in mind of the right side and left side
leg) with a Flat Washer (C), Lock Washer (B) and Nut (A). (See detail C).
Keep nut loose at this point. Insert right side stretcher and left side stretcher
between the Front and Back Legs, then insert the Front Stretcher between
the two Front Legs. (Make sure that the side stretchers are not at an angle
as the front legs are on the wrong side). Fasten stretchers to legs with
Screws (I) using a Screwdriver (not proviđe).
- Be sure to level the chair prior to tightening front leg nuts with wrench
provided (G).
DETAIL C
3
G
A B
C
4 x
- Carefully lay Chair Back flat on a smooth flat surface to prevent scratches.
- Attach Complete Seat to Chair Back by inserting a Flat Washer, Lock
Washer and Short bolt into each of the hole on the back of the seat.
Tighten screws with provided Allen Key by turning clockwise until secure.
(See Detail A).
- Insert a Flat Washer, Lock Washer an Long screw into each of 2 holes in
the Complete Seat corners. Tighten screws with provided Key Wrench.
(See Detail B).
STEP 1
· Fabric Content : 73%POLYESTER / 27%COTTON
· Cleaning Code W : Clean only with water-based
shampoo or foam upholstery cleaner.
Do not over wet. Do not use solvents to spot clean.
ASSEMBLY INSTRUCTIONS &
PARTS IDENTIFICATION
UPH COUNTER STOOL
Hardware kit
MADE IN VIET NAM
Loading...