ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Parts:
Mounting Plate (A)
Mounting Screw (B)
Wire Nut (E)
Green Grounding
Screw (C)
Headless Screw (D)
“ L ” Screwdriver (F)
Mounting Plate (A)
Wire Nut (E)
House Grounding Wire
Outlet Box
Exterior Glass
Shade (G) (X1)
Back Plate
Glass
Interior
Shade (H) (X1)
Exterior Glass Shade (G)
Interior Glass Shade (H)
Bulb T10 Max.75W
(not included)
Bulb T10 Max.75W
(not included)
Socket Spring
Fixture Grounding Wire
Green Grounding Screw (C)
Mounting Screw (B)
Fixture Wire
1. Attach the mounting plate to the outlet box by
using two mounting screws.
2. Pull out the outlet wires and the house
grounding wire from the outlet box. Make wire
connections by using the wire nuts:
---Connect the black (hot) wire from the fixture
to the black (hot) wire from the power
source.
---Connect the white (neutral) wire from the
fixture to the white (neutral) wire from the
power source.
---Attach the fixture grounding wire to the
mounting plate with the green grounding
screw. Then connect it to the house
grounding wire with a wire nut.
Carefully put the wires back into the outlet box.
Glass bracket
Headless Screw (D)
“ L ” Screwdriver (F)
Interior Glass Shade
Slot
Socket Spring
Fixture
arm
Slot
Fig.1
3. Attach the back plate to the mounting plate, secure the headless screws from the bottom hole of
the back plate onto the the bottom side of the mounting plate.
4. Install bulbs (not included). See relamping label at socket area or packaging for maximum
allowed wattage.
5. Press the socket spring, place the interior glass shade into the glass bracket, adjust the slot of
the interior glass shade to locate into the arm of the fixture, then place the exterior glass shade
into the glass bracket, adjust the exterior glass shade to locate into the slot of the fixture.
(See Fig. 1)
6. Turn on the power at the main fuse or circuit breaker box.
A
C
A: 4-1/4"
B: 4"
C: 13-1/2"
B
Loading...