Page 1
Bulbs ( Included ):8*LED*6W
Page 1 of (2)
Please consult your electrician for hanging fixture and wiring.
MADE IN CHINA
WARNING: Wires need to be connected to driver found in
canopy and should not be connected directly to power source
or a short may occur.
The fixture is designed to dim with a standard Triac
forward phase dimmer. Dimming levels will vary by
dimmer.
Below is a list of recommended dimmers:
Lutron MACL-153M
Lutron DVL-153P
Lutron SCL-153P
Leviton IPL06-10Z
Leviton 6674-POW
Due to inrush current wattage should not exceed 150
watts of product for a 600 watt dimmer.
PRODUCT NAME: 8LT Pendant
Page 2
2.)
1.)
3.)
Bracket (B)
Canopy(E)
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Step1 :Remove mounting bracket
from fixture and install to electrical
box. The safety button mounted to
the bracket。
Green/Ground
(B)
White/Neutral
Black/Positive
(F)
Screws(D)
A
C
E
G
(G)
D
(A)
(B)
B
(C)
(D)
Decorative
Nut
(G)
F
Plastic
Expansion
Screw(A)
Mounting
Screws(C)
Step3 : Install fixture to bracket and
Decorative
Nuts at the ends of the
canopy to secure.
(B)
(E)
(F)
Safety
Button
(F)
(E)
Step2 :Adjust wire length to desired
mounting height, and tighten strain
relief screws to secure. Wire fixture
to wires in outlet box. Green wire is
for Ground.
Loading...