Wade Antenna DMX User Manual
DELHI TOWERS
DMX Standard, Medium and Heavy Duty Towers
Features
DMX-28N
DMX-36N
DMX-44N
DMX-01T
DMX-02
DMX-03
DMX-04
DMX-05
DMX-06
• Attractive tapered design.
• “X” brace with beaded
channel leg.
• Enhancements made to both
leg profile and taper allow
for easier installation and
improved tower structure
• Eight foot sections.
• Compact shipping package.
• Free standing installation.
• Ideal for amateur radio and industrial/
commercial communications
applications.
• Climb shields recommended.
• High strength galvanized steel
construction.
Standard Tower Packages
DMX towers are packaged complete with CBS concrete base stubs, DM mast,
top plate, rotor plate, TMCA clamp assembly and all necessary hardware.
Height includes mast.
Medium and Heavy Duty Tower Packages
DMXMD and DMXHD towers are packaged complete with CBS concrete base
stubs, top plate, rotor plate, 2 model 244A cast aluminum mast clamps and all
necessary hardware. Mast not included.
Tower Models
DMX-28N 28’ (8.53 m)
DMX-36N 36’ (10.97 m)
DMX-44N 44’ (13.41 m)
DMX-52N 52’ (15.85 m)
DMX-60N 60’ (18.29 m)
DMX-68N 68’ (20.73 m)
DMXMD-32N 32’ (9.75 m)
DMXMD-40N 40’ (12.19 m)
DMXMD-48N 48’ (14.63 m)
DMXMD-56N 56’ (17.07 m)
DMXHD-32N 32’ (9.75 m)
DMXHD-40N 40’ (12.19 m)
DMXHD-48N 48’ (14.63 m)
DMX-52N
Minimum Concrete Requirements
DMX-07
• New concrete
foundation
based on current
DMX-60N
standards.
Contact us for
more details.
DMX-08
DMX-68N
WADE ANTENNA’S ONGOING POLICY OF CONTINUING DEVELOPMENT MAY RESULT IN SPECIFICATION CHANGES TO ITS PRODUCTS
DEPTH =
1.2 m
Width = 1.67 m
NTS
CONCRETE REQUIRED = 3.34 cu.m.
BASED ON THE DMX-08 SECTION
www.wadeantenna.com
BASE STUBS
IN CONCRETE
MADE IN CANADA
DELHI TOWERS
DMX Tower Load Limits
Load Limits
DMXMD-32N
DMX-02T
DMX-03
DMX-04
DMX-05
DMX Standard Duty Towers are designed to support up to 3 square
feet (0.28 m2) projected wind area.
DMXMD Medium Duty Towers are desigend to support up to 6
sqyare feet (0.56 m2) projected wind area.
DMXHD Heavy Duty Towers are designed to support up to 9 square
feet (0.84 m2) projected wind area.
Caution:
Guy wires must be used for larger loads or if
straight sections are added for extra height.
Note:
For tower accessories or parts that may be ordered
separately, please refer to DMX parts and accessories
A/B
DMX-03T
DMX-04
DMX-05
DMX-06
DMX-06
DMXHD-32N
DMX-07
DMXHD-40N
DMX-08
DMXHD-48N
DMXMD-40N
DMXMD-48N
DMXMD-56N
DMX-07
DMX-08
A: 26” (66.23 cm) DMX Standard
B: 41” (104 cm) DMXMD/HD
Formed Leg
Top View
Width = 1.67 m
DEPTH =
1.2 m
CONCRETE REQUIRED = 3.34 cu.m.
NTS
BASE STUBS
IN CONCRETE
WADE ANTENNA’S ONGOING POLICY OF CONTINUING DEVELOPMENT MAY RESULT IN SPECIFICATION CHANGES TO ITS PRODUCTS
www.wadeantenna.com
MADE IN CANADA
Loading...