Wade Antenna CFM2-x User Manual

WADE

WADE A NTENNA L TD . 1-800-463-1607

OMNI-DIRECTIONAL
VHF ANTENNA

MODEL:

CFM2- *

This rugged omni-directional antenna can be cut to
any channel from 2 to 13. Other frequencies are
available on request. Output impedance is 75 Ohm
with a standard "F" connector. It is also available
with "N" connector and 50 Ohm impedance.

Antenna, Inc.

OMNI-DIRECTIONAL
VHF ANTENNA

• CFM2- *

This rugged omni-directional antenna can be cut to any
channel from 2 to 13. Other frequencies are available on
request. Output impedance is 75 Ohm with a standard “F”
connector. It is also available with “N” connector and 50
Ohm impedance.

SPECIFICATIONS:

ElEctrical

Specification

FREQUENCY RANGE 54 - 220 MHz (Specify channel)
CHANNELS 2 To 13 (available on request)
GAIN (dBi) -1 dBi
IMPEDANCE 75 Ohm

VSWR 2.0:1 (Max.)
MAXIMUM POWER 100 Watts
CONNECTOR 75 Ohm - "F"

MOUNT 1.5 TO 3" I.D. U-BOLT
WEIGHT 15 Lbs. (CH. 2)

* Specify frequency or channel

A qualified structural engineer should be consulted prior to mounting an antenna on a tower or a support structure.

CFM2- *

50 Ohm - "N" (on request)

5 Lbs. (CH. 13)

MEcHaNical

MODEL

CFM2-2
CFM2-3
CFM2-4 1.09 3.75 39.3 33.8 94.0 80.8
CFM2-5 0.93 3.20 33.5 28.8 68.4 58.8
CFM2-6 0.86 2.97 31.0 26.7 58.8 50.6
CFM2-FM
CFM2-7
CFM2-8
CFM2-9
CFM2-10 0.38 1.33 13.7 12.0 11.6 10.2
CFM2-11 0.38 1.33 13.7 12.0 11.6 10.2
CFM2-12 0.35 1.19 12.6 10.7 9.6 8.1
CFM2-13 0.35 1.19 12.6 10.7 9.6 8.1

WIND LOAD AREA (SQ. FT.)

NO ICE 1" RAD. ICE NO ICE 1" RAD. ICE NO ICE 1" RAD. ICE

1.34 4.62 48.3 41.6 142.3 122.6

1.18 4.07 42.5 36.6 110.3 95.0

0.80 2.74 28.8 24.7 50.4 43.2

0.41 1.42 14.8 12.8 13.4 11.6

0.40 1.37 14.4 12.3 12.6 10.8

0.38 1.33 13.7 12.0 11.6 10.2

THRUST (LBS.) TORQUE (FT. - LBS.)

WADE Antenna Inc.

29 Sharp Road
Brantford, Ontario, N3T 5L8 Canada
Tel: [phone]
Fax: [phone]

[e-mail]

www.wadeantenna.com

[phone]