INSTRUCTIONS:
Pendant Shade Installation
CAUTION
• Always turn off power at main switch prior to installation to prevent electrical shock.
SINGLE PIECE SHADE:
All components screw clockwise to
tighten.
1. Make certain the Nord style
socket is screwed fully into the
aluminum cone.
2. Note the orientation of the black
threaded retaining ring in the
diagram.
3. Raise the shade to the level of
the Nord socket so that the
threaded portion protrudes
through the hole.
4. Place the leveling spring on top
of the retaining ring, and screw
on to the socket until the shade
is snug against the aluminum
cone.
LAMPING:
Single piece shades accept “A” or
“G” type lamps 100 Watt max.
ALUMINUM CONE
NORD SOCKET
LEVELING SPRING
RETAINING RING
Loading...