Wacker Neuson BS50-2, BS50-2i, BS70-2i, BS65-V, BS60-2 Operator's Manual
...
Operator’s Manual
5200016051
Vibratory Rammer
BS50-2, BS50-2i
BS60-2, BS60-2i
BS70-2, BS70-2i
BS65-V
Type BS50-2, BS50-2i, BS60-2, BS60-2i,
Document 5200016051
Date
Revision
Language EN
BS70-2, BS70-2i, BS65-V
1116
08
Copyright notice
© Copyright 2016 by Wacker Neuson Production Americas LLC
All rights, including copying and distribution rights, are reserved.
This publication may be photocopied by the original purchaser of the
machine. Any other type of reproduction is prohibited without express
written permission from Wacker Neuson Production Americas LLC.
Any type of reproduction or distribution not authorized by Wacker
Neuson Production Americas LLC represents an infringement of valid
copyrights. Violators will be prosecuted.
Trademarks
Manufacturer
Original instructions
All trademarks referenced in this manual are the property of their
respective owners.
Wacker Neuson Production Americas LLC
N92W15000 Anthony Avenue
Menomonee Falls, WI 53051 U.S.A.
Tel: (262) 255-0500 · Fax: (262) 255-0550 · Tel: (800) 770-0957
www.wackerneuson.com
This Operator’s Manual presents the original instructions. The original
language of this Operator’s Manual is American English.
Rammer
Foreword
Foreword
SAVE THESE INSTRUCTIONS—This manual contains important instructions for
the machine models below. These instructions have been written expressly by
Wacker Neuson Production Americas LLC and must be followed during inst allation,
operation, and maintenance of the machines.
Machine Item Number
BS 50-2i 5200000642, 5200000643, 5200000657, 5200000658,
5200000659, 5200000660, 5200000661, 5200000687,
5200011099, 5200025428, 5200025429
BS 60-2i 5200000645, 5200000646, 5200000664, 5200000665,
5200000689, 5200000690
BS 70-2i 5200000649, 5200000650, 5200000672, 5200000673
Machine Item Number
BS 50-2 5200000641, 5200000652, 5200000653, 5200000654,
5200000655, 5200000656, 5200000685, 5200000686
BS 60-2 5200000663, 5200000688, 5200019205
BS 70-2 5200000670, 5200000671
Machine Item Number
BS 65-V 5200000669
wc_tx003550gb_FM10.fm
3
Foreword
wc_gr010403
Rammer
Machine
identification
Serial number
(S/N)
Machine
documentation
Expectations
for
information in
this manual
A nameplate listing the model number, item number, revision number, and serial
number is attached to this machine. The location of the nameplate is shown above.
For future reference, record the serial number in the space provided below. Y ou will
need the serial number when requesting parts or service for this machine.
Serial Number:
■ From this point forward in this documentation, Wacker Neuson Production
Americas LLC will be referred to as Wacker Neuson.
■ Keep a copy of the Operator’s Manual with the machine at all times.
■ Use the separate Parts Book supplied with the machine to order replacement
parts.
■ If you are missing either of these documents, please cont act Wacker Neuson to
order a replacement or visit www.wackerneuson.com.
■ When ordering parts or requesting service information, be prepared to provide
the machine model number, item number, revision number, and serial number.
■ This manual provides information and procedures to safely operate and
maintain the above Wacker Neuson model(s). For your own safety and to
reduce the risk of injury, carefully read, understand, and observe all instructions
described in this manual.
■ Wacker Neuson expressly reserves the right to make technical modifications,
even without notice, which improve the performance or safety standards of its
machines.
■ The information contained in this manual is based on machines manufactured
up until the time of publication. Wacker Neuson reserves th e right to change any
portion of this information without notice.
■ The illustrations, parts, and procedures in this manual refer to Wacker Neuson
factory-installed components. Your machine may vary depending on the
requirements of your specific region.
4
wc_tx003550gb_FM10.fm
Rammer
Foreword
CALIFORNIA
Proposition
65 Warning
Laws
pertaining to
spark
arresters
Manufacturer’s
approval
Combustion exhaust, some of its constituents, and certain vehicle components
contain or emit chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm.
NOTICE: State Health Safety Codes and Public Resources Codes specify that in
certain locations spark arresters be used on internal combustion engines that use
hydrocarbon fuels. A spark arrester is a device designed to prevent accidental
discharge of sparks or flames from the engine exhaust. Spark arresters are
qualified and rated by the United S t ates Forest Service for this purpose. In order to
comply with local laws regarding spark arresters, consult the engine distributor or
the local Health and Safety Administrator.
This manual contains references to approved parts, attachments, and
modifications. The following definitions apply:
■ Approved parts or attachments are those either manufactured or provided by
Wacker Neuson.
■ Approved modifications are those performed by an authorized Wacker
Neuson service center according to written instructions published by Wacker
Neuson.
■ Unapproved parts, attachments, and modifications are those that do not
meet the approved criteria.
Unapproved parts, attachments, or modifications may have the following
consequences:
■ Serious injury hazards to the operator and persons in the work area
■ Permanent damage to the machine which will not be covered under warranty
Contact your Wacker Neuson dealer immediately if you have questions about
approved or unapproved parts, attachments, or modifications.
wc_tx003550gb_FM10.fm
5
Foreword
Notes
Rammer
6
wc_tx003550gb_FM10.fm
EC Declaration of Conformity
Manufacturer
Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,
Menomonee Falls, Wisconsin 53051 USA
Machine:
Product
Product category
Product function
Item number
Net installed power
Measured sound power level
Guaranteed sound power level
BS50-2
BS50-2i
Vibratory Rammer
To compact soil
5200000652, 5200000653, 5200000654, 5200000655, 5200000656,
5200000657, 5200000658, 5200000659, 5200000660, 5200000661,
5200011099, 5100014171, 5100014907, 5100016644, 5100016645,
5100016646, 5100016647, 5100016648, 5100016649, 5100016650
1.7 kW
105 dB(A)
108 dB(A)
Conformity Assessment Procedure
According to 2000/14/EC ANNEX VIII
Notified Body
Lloyds Register Verification Limited (Notified Body No 0038)
71 Fenchurch Street, London EC3M 4BS, United Kingdom
Directives and Standards
We hereby declare that this product meets and complies with the relevant regulations and
requirements of the following directives and standards:
2006/42/EC, 2000/14/EC, 2005/88/EC, 2014/30/EU, EN 500-1, EN 500-4
Authorized Person for Technical Documents
Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6,
85084 Reichertshofen, Germany
Menomonee Falls, WI, USA, 08.07.2016
Keith Herr
Vice President and Managing Director
For Wacker Neuson
2017-CE-BS50-2_en_FM10 .fm
Jeff Volden
Director, Product Engineering
For Wacker Neuson
Original Declaration of Conformity
Paul Sina
Manager, Product Engineering
For Wacker Neuson
EC Declaration of Conformity
Manufacturer
Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,
Menomonee Falls, Wisconsin 53051 USA
Product
Product
Product category
Product function
Item number
Net installed power
Measured sound power level
Guaranteed sound power level
BS60-2
BS60-2i
Vibratory Rammer
To compact soil
5200000663, 5100014847, 5200019205
5200000664, 5200000665, 5100014908
1.8 kW
105 dB(A)
108 dB(A)
Conformity Assessment Procedure
According to 2000/14/EC ANNEX VIII
Notified Body
Lloyds Register Verification Limited (Notified Body No 0038)
71 Fenchurch Street, London EC3M 4BS, United Kingdom
Directives and Standards
We hereby declare that this product meets and complies with the relevant regulations and
requirements of the following directives and standards:
2006/42/EC, 2000/14/EC, 2005/88/EC, 2014/30/EU, EN 500-1, EN 500-4
Authorized Person for Technical Documents
Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6,
85084 Reichertshofen, Germany
Menomonee Falls, WI, USA, 28.07.16
Keith Herr
Vice President and Managing Director
For Wacker Neuson
2017-CE-BS60-2_en_FM10 .fm
Jeff Volden
Director, Product Engineering
For Wacker Neuson
Original Declaration of Conformity
Paul Sina
Manager, Product Engineering
For Wacker Neuson
EC Declaration of Conformity
Manufacturer
Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,
Menomonee Falls, Wisconsin 53051 USA
Product
Product
Product category
Product function
Item number
Net installed power
Measured sound power level
Guaranteed sound power level
BS70-2
BS70-2i
Vibratory Rammer
To compact soil
5200000670, 5200000671, 5100014905, 5100016652
5200000672, 5200000673, 5100014909, 5100016653
2.0 kW
105 dB(A)
108 dB(A)
Conformity Assessment Procedure
According to 2000/14/EC ANNEX VIII
Notified Body
Lloyds Register Verification Limited (Notified Body No 0038)
71 Fenchurch Street, London EC3M 4BS, United Kingdom
Directives and Standards
We hereby declare that this product meets and complies with the relevant regulations and
requirements of the following directives and standards:
2006/42/EC, 2000/14/EC, 2005/88/EC, 2014/30/EU, EN 500-1, EN 500-4
Authorized Person for Technical Documents
Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6,
85084 Reichertshofen, Germany
Menomonee Falls, WI, USA, 13.05.2016
Keith Herr
Vice President and Managing Director
For Wacker Neuson
2017-CE-BS70-2_en_FM10 .fm
Jeff Volden
Director, Product Engineering
For Wacker Neuson
Original Declaration of Conformity
Paul Sina
Manager, Product Engineering
For Wacker Neuson
EC Declaration of Conformity
Manufacturer
Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,
Menomonee Falls, Wisconsin 53051 USA
Product
Product
Product category
Product function
Item number
Net installed power
Measured sound power level
Guaranteed sound power level
BS65-V
Vibratory Rammer
To compact soil
5200000669, 5100016651
2.0 kW
104 dB(A)
108 dB(A)
Conformity Assessment Procedure
According to 2000/14/EC ANNEX VIII
Notified Body
Lloyds Register Verification Limited (Notified Body No 0038)
71 Fenchurch Street, London EC3M 4BS, United Kingdom
Directives and Standards
We hereby declare that this product meets and complies with the relevant regulations and
requirements of the following directives and standards:
2006/42/EC, 2000/14/EC, 2005/88/EC, 2014/30/EU, EN 500-1, EN 500-4
Authorized Person for Technical Documents
Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6,
85084 Reichertshofen, Germany
Menomonee Falls, WI, USA, 13.05.2016
Keith Herr
Vice President and Managing Director
For Wacker Neuson
2017-CE-BS65-V_en_FM10.fm
Jeff Volden
Director, Product Engineering
For Wacker Neuson
Original Declaration of Conformity
Paul Sina
Manager, Product Engineering
For Wacker Neuson
Loading...