Page 1
User Manual for
VP720 Series
June 2018
28-0002 Rev 5
Page 2
Overview
This User Manual is for four (4) Vypin Asset Tracking Devices, Model Numbers: VP700, VP710,
VP720, and VP730. Each is a dual frequency, Bluetooth LE device containing a receiver
operating within a bandwidth of 902 MHz to 928 MHz. All four units are powered by an internal
battery. Customers can purchase tags via email (sales@vypin.com or info@vypin.com), directly
through the company website (www.vypin.com), or through a sales representative.
Picture of VP700:
Picture of VP710:
Picture of VP720:
28-0002 Rev 5
Page 3
Picture of VP730:
Industries / Applications
The tags fit the demands of the transportation industry and can also be used to track larger
pieces of equipment and vehicles in work in progress (WIP) and warehouse asset tracking.
Customer Benefits
VP700 – provides customers with increased safety compliance, near real-time inventory,
increased security, visibility of asset utilization, and operational intelligence.
VP710 – provides customers with increased safety compliance, near real-time inventory,
increased security, visibility of asset utilization, operational intelligence, and temperature
data.
VP720 – provides customers with increased safety compliance, near real-time inventory,
increased security, visibility of asset utilization, operational intelligence, as well as
temperature and humidity data.
VP730 – provides customers with increased safety compliance, near real-time inventory,
increased security, visibility of asset utilization, operational intelligence, as well as
temperature, humidity, and light sensor data.
Tracking of Tags
Vypin tags are tracked using the Vypin application on the following devices: (iOS – 9.3 or
newer), (Android – 4.4 or newer).
28-0002 Rev 5
Page 4
Installation Process
Customers should download the Vypin Overpass Mobile App and the Vypin Overpass Chill App
using the instructions available within the Support & Knowledge Center on the company website
(www.vypin.com).
Each of these tags can be placed on a customer’s asset without intruding on the external side of
the container / asset. Following are the tools used to install the tag on the asset:
VP700 – magnet, self-adhesive, steel plate.
VP710 – magnet, self-adhesive, steel plate.
VP720 – magnet, self-adhesive, steel plate.
VP730 – magnet, self-adhesive, steel plate.
Sync Tags with Vypin Applications
VP700 – There is no special sync needed. The Vypin OverPass Mobile App will need to
have gateway mode turned on, once activated the gateway will provide tag info to the cloud.
The following steps should be used to turn on gateway mode on the Vypin OverPass Mobile
App: (1) Open the App, (2) Press the setting button, (3) Tap the toggle next to Gateway
Mode to turn it on. Once done, the Vypin OverPass Mobile app will start to provide tag info
to the cloud via the mobile internet connection.
VP710, VP720, VP730 – There is no special sync needed. The Vypin OverPass Mobile App
will need to have gateway mode turned on, once activated the gateway will provide tag info
to the cloud. The following steps should be used to turn on gateway mode on the Vypin
OverPass Mobile App: (1) Open the App, (2) Press the setting button, (3) Tap the toggle
next to Gateway Mode to turn it on. Once done, the Vypin OverPass Mobile app will start to
provide tag location and battery to the cloud via the mobile internet connection. For the
OverPass Chill App, once the load for the linked asset is created and the driver uses the
Chill App to pick up the load, it will automatically connect to the tag linked to the asset as
long as it’s in range and will start to collect temp and location data in real time. No further
syncing is needed. This data will be sent to the cloud via the mobile internet connection.
FCC ID:2ALIWVP720
FRN: 006292722
VP700, VP710, VP720, and VP730
These devices comply with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) These devices may not cause harmful interference and
(2) These devices must accept any interference received, including interference that may
cause undesired operation.
Important Notice: Changes or modifications made to these devices not expressly approved by
Vypin, LLC could void the Customer’s authority to operate these devices.
28-0002 Rev 5
Page 5
Industry Canada Notice to Users:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1)
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en
compromettre le fonctionnement.
28-0002 Rev 5
Loading...