VMS
157
Features
- Modular dimensions in increments of 4",
from 12" x 8" to 24" x 16".
- Bases and end plates in fiberglass reinforced
polycarbonate, with covers in polycarbonate.
- Covers transparent, opaque or DT cover,
common design and depth.
- DT cover with double closure system: snap
lock and additional fastening with thumb
screws.
- Basic design incorporates removable side
walls for easy access and wiring.
- Time saving coupling by means of vertical
keys, sunk into the corner shafts, eliminating
nuts, bolts and coupling frames.
- End plates, with or without openings, are
snapped on from the outside and fixed by
means of the vertical keys.
- Once mounted, end plates are flush with the
side panels of the base.
- Depth extension frames provide additional 3".
- Accessories include mounting plates, DINrail mounting, fixing brackets, dead front
cover plates with quarter turn fasteners.
- Temperature resistance: -58°F to +302°F
(-50°C to +150°C), momentary +392°F
(200°C)
Applications
Designed for use with panelboards, motor
control centers and electronic instrumentation
requiring high impact strength and IP65
rating.
Standards
IEC 529 & IP65
EN 60529
Enclosures with H.R.C. fuse plates
Enclosures for loadbreak switches
VMS
158
VMS
Modular dimensions in increments of 100
mm in height and width, available in five
sizes:
320 x 220 mm 640 x 320 mm
320 x 320 mm 640 x 440 mm
440 x 320 mm
Fixing points for accessories in increments
of 25 mm in bottom plate and top end of
the base.
Captive integrated gaskets on bottom and
side.
Large rectangular passage openings.
Hinged cover with double closure system:
1. A snap lock
2. Additional fastening by means of two
thumb screws
Time saving coupling by means of vertical
keys sunk into the corner shafts.
Assorted covers: transparent, opaque, or
hinged, common design and depth.
End plates, combi or blind, are snapped on
from the outside and fixed by means of
vertically sunk keys.
Excellent accessibility and wiring space for
installation, mounting and cable
connection, even after coupling.
Cover recess for self-adhesive total
installation icon.
Once mounted, end plates fit perfectly
flush with the side panels of the base.
VMS
Depth extension frames offer additional
mounting depth of 75 mm for each box
type.
Bridges allow connection of heavy cables
(320 and 440 mm sides).
Adjustment of depth in five increments, for
DIN-rails, mounting plates and mounting
profiles 12 x 2 mm.
Rectangular mounting plates (2 mm in
metal or 5 mm in laminated pertinax) with
mounting set. Usable mounting depth is
maximized and not dependent on plate
thickness.
Bridges are inserted after connection of
cables (320 and 440 mm sides).
Universal support for screwless and depth
adjustable installation of component rails.
The support is simply clicked over the
base.
Plain cover plates with quarter-turn
fasteners. Cover plates are fully supported
by the base top frame.
Universal cable entries and stress relieving
cable clamps for cables up to Ø 75 mm can
be located in any base on side 300 mm (for
two cables) or on side 400 mm (for three
cables).
Stainless steel fixing brackets featuring
three optional positions: 0°, 45° and 90°.
159
160
VMS
FRP NEMA 3, 3R, 4, 4X, 12 & 13 enclosures VMS with Opaque Cover
For hinged version add “H” to catalog number
Catalog Outside Inside Mounting Plate Panel Non-Metallic
Number H W D h w d Number H W Dead Front
VMS1208 12.60 8.66 7.04 5.91 9.84 5.78 *VMMP1208 6.3 10.2 VMDF1208
Weight 2.75 lbs. 320 220 179 150 250 147 160 259
VMS1212 12.60 12.60 7.04 9.84 9.84 5.78 *VMMP1212 10.2 10.2 VMDF1212
Weight 3.5 lbs. 320 320 179 250 250 147 259 259
VMS1612 17.32 12.60 7.04 14.57 9.84 5.78 *VMMP1612 15 10.2 VMDF1612
Weight 4.41 lbs. 440 320 179 370 250 147 381 259
VMS2412 25.20 12.60 7.04 22.44 9.84 5.78 *VMMP2412 22.8 10.2 VMDF2412
Weight 6.56 lbs. 640 320 179 570 250 147 579 259
VMS2416 25.20 17.32 7.04 22.44 14.57 5.78 *VMMP2416 22.8 15 VMDF2416
Weight 8.34 lbs. 640 440 179 570 370 147 579 381
FRP NEMA 3, 3R, 4, 4X, 12 & 13 enclosures VMS with Clear Cover
For hinged version add “H” to catalog number
Catalog Outside Inside Mounting Plate Panel Non-Metallic
Number H W D h w d Number H W Dead Front
VMS1208CT 12.60 8.66 7.04 5.91 9.84 5.78 *VMMP1208 6.3 10.2 VMDF1208
Weight 2.75 lbs. 320 220 179 150 250 147 160 259
VMS1212CT 12.60 12.60 7.04 9.84 9.84 5.78 *VMMP1212 10.2 10.2 VMDF1212
Weight 3.5 lbs. 320 320 179 250 250 147 259 259
VMS1612CT 17.32 12.60 7.04 14.57 9.84 5.78 *VMMP1612 15 10.2 VMDF1612
Weight 4.41 lbs. 440 320 179 370 250 147 381 259
VMS2412CT 25.20 12.60 7.04 22.44 9.84 5.78 *VMMP2412 22.8 10.2 VMDF2412
Weight 6.56 lbs. 640 320 179 570 250 147 579 259
VMS2416CT 25.20 17.32 7.04 22.44 14.57 5.78 *VMMP2416 22.8 15 VMDF2416
Weight 8.34 lbs. 640 440 179 570 370 147 579 381
*For galvanized steel use suffix “S” For non-metallic use suffix “N”
NOTE: - Millimeters
VMS
161
7.48
.98
9.65
12.60
5.71
8.66
16.14
14.57
9.65
9.65
25.20
24.02
5.71
8.66
3.50
.65
9.65
.35
14.37
17.32
9.65
12.61
25.10
9.652.95
3.5
3.5
.65
.65
.65
12.60
b
h
1.97
2.61
14.37
17.32
.98
9.84
8.66
22.44
9.84
12.60
9.65
.98
11.42
11.42
14.37
.98
11.42
16.14
11.42
9.65
25.20
24.02
9.65
.98
9.84
12.60
22.44
12.60
9.65
9.84
9.84
12.60
5.91
5.91
9.65
12.60
9.65
9.84
9.84
11.42
5.91
9.84
Type Dimensions b h
VMDT 1212 12.60 x 12.60 10.24 9.49
VMDT1612 17.32 x 12.60 10.24 14.21
VMS1208
VMS2416
8" SIDE CUTOUT
12" SIDE CUTOUT
VMDT
16" SIDE CUTOUT
VMS1212
VMS1612
VMS2412
17.32
5.08
5.08
5.08
5.08
Bases Openings in the base side walls
Pivoting covers
166
VMS
Loading...