Page 1
PEDESTALS
219
Features
- Available in 30 sizes from 13" X 11" X 7" to
44" X 49" X 27".
- Designed for the connection of
underground cables for the distribution to
several customers from the same cabinet.
- Bases are partly buried into the ground.
- For some models, burial foot and above
ground structure is molded as one part.
- Housing manufactured from hot
compression molded fiberglass reinforced
polyester (FRP).
- Removable front covers for easy access.
- Pedestals have high protection and total
insulation to BS 5486, Part 1 and IEC
439. Degree of protection at least IP/43.
- Very high mechanical impact strength IP
xx-11 (NBN C20-001, annex A) and a high
thermal insulation which results in reduced
temperature variations within the
enclosure.
- RAL (7035)
- Temperature resistance: -51°F to +225°F
(-35°C to +125°C)
Applications
Excellent for use in power distribution for
service entrance cabinets or cable
splice/junction boxes and cable television
distribution (CATV). Can be used for 19"
racking systems. Also, has applications in
telecommunications (fiber optics or
electronics) and for traffic signal controls,
utility metering and distribution
compartments (gas, water and power) and
public lighting (street lights, parking lots,
tennis courts). Recreational applications
include marinas, campgrounds, and
marketplace power outlets and underground
sprinkler systems.
Standards
NEMA/CEMA 3R
IEC 529 rated IP/43
(IP54 for EH6 models)
BS-5490
PEDESTALS
Page 2
PEDESTALS
227
Type EH6
Low cost cabinets
- Cabinets made of light gray, hot compression
molded, fiberglass reinforced polyester.
- High protection: at least IP43 according to NBN
C20-001, IEC 529 and BS 5490, NEMA 3R
- Total insulation according to BS 5490
and IEC 529.
- High mechanical impact strength: IPxx-11
according to NBN C20-001.
- Corrosion resistant
- UV stabilized for outdoor applications.
- Temperature resistance: -51°F to +225°F
(-35°C to +125°C)
- The same features of EH3, except for the
mounting holes.
- The rear part has mounting holes for self
tapping screws M8, allowing direct
mounting of busbars, a frame, a mounting
plate or components.
- 180° plus door opening.
Special features on request
- Rear door
- Left hinged door
- IP54 protection degree
- Bottom plate
- Wall mounting unit
EH6/3219 Cabinet IP54-11 &
IP43-11
BP6/3219 Non-metallic
mounting plate
(27.68 x 14.17 x .20)
EH6-3224 Cabinet
IP54-11 & IP43-11
BP6/3224 Non-metallic
mounting plate
(27.68 x 19.49 x .20)
EH6/3232 Cabinet
IP54-11 & IP43-11
BP6/3232 Non-metallic
mounting plate
(27.68 x 27.17 x .20)
Dimensions on page 105
Polyester bases
for EH3 and EH6 pedestals
DIN-standard bases in accordance with DINstandard 43629
- Made of fiberglass reinforced polyester
- Complete with stress relieving cable clamp
- Height of all bases: 35.43
EFP19 For types 00
35.43 x 17.72 x 12.20
EFP24 For types 0 and 20
35.43 x 23.03 x 12.20
EFP31 For types 1 and 21
35.40 x 30.70 x 12.20
EFP44 For types 2 and 22
35.43 x 43.31 x 12.20
EFP57 For types 3 and 23
35.43 x 56.30 x 12.20
DIN000123
A 14.70 19.49 27.17 40.16 53.15
B 11.81 17.13 24.80 37.80 50.78
C 16.14 21.46 29.13 42.13 55.12
18.50
12.60
32.68
23.82
12.60
32.68
31.60
12.60
32.68
6.30
6.30
19.88
35.51
1.18
10.47
.63
Loading...