Vynckier Enclosure Systems ARIA SERIES Catalog Page

ARIA SERIES

167

Features

- The range is available in seven sizes,
ranging from 12" x 8" to 40" x 32".

- The cabinets are made of beige (RAL

7032) hot molded fiberglass reinforced
polyester, dyed in mass. The enclosure is
furnished with four threaded studs and
bolts for mounting plate or mounting
frame installation.

- The enclosure provides double insulation

and a protection degree of IP66-9
following IEC 529 and CENELEC EN
60529 UL/CSA listed NEMA 4X.

- Temperature resistance: -58°F to +302°F
(-50°C to +150°C), momentary +392°F
(200°C)

- Self extinguishing and halogen-free.

- Cabinets are maintenance free and
corrosion resistant.

- Optimum seals are obtained by the use
of molded-in channels in conjunction
with seamless foamed polyurethane or
neoprene gaskets.

Applications

Contoured body provides an attractive and
contemporary appearance. Enclosures can be
used as insulated electrical junction boxes,
terminal wiring boxes, instrument housings
and as housings for electrical controls in wet,
dusty and corrosive environments.

Standards

IEC 439-1
IEC 529 Rated IP66-9
EN 60439-1
EN 60529

Approvals

UL types 3, 3R, 3S, 4, 4X,
12 and 13 per UL 508

CSA types 2, 3, 3R, 3S, 4 4X, 12
and 13

AS 3132 - 1991

Cover plate:

• polyester
RAL 7035

• hinged

• independent

• reversible

• sealable

• with quarter

turn closure

Internal three-point
closing system with
one-point entry.
Interchangeable locks.

Mounting frame:

• removable

• predrilled

• reinforced DIN-rails

Mounting plate:

• aluminum, painted
steel or non-metallic

Direct wall
mounting points
or wall
mounting feet in
stainless steel
or non-metallic

Housing in one piece

Slightly curved
gasket-slot avoiding
stagnant water

ARIA SERIES

168

ARIA SERIES

FRP NEMA rating 3, 3R, 4, 4X, 12 & 13 Aria Series with 1/4 turn Handle Opening

FEATURES

• Available in seven sizes

• Internal three-point closing system with
one-point entry

• Padlockable latches available

• Integrated rain shield

• Temperature resistance -58°F to +302°F
(-50°C to +150°C)
Momentary to +392°F (200°C)

• Seamless, polyurethane gasket in
molded door edge channel

ACCESSORIES

• Din rails

• Handles

• Key-lock cylinders

• Air vents

Outside Inside Part Numbers

Part Dimensions Dimensions Back Plates Front Plates

Number H W D h w d Weight Aluminum Steel Non-Metallic Dimensions Non-Metallic Aluminum

AN1208* 12.40 8.46 6.69 10.83 6.69 5.83 5.25 lb ABP1208A ABP1208S ABP1208N 9.84 x 5.91 AFP1208N AFP1208A

(mm) (315 215 170) (275 170 148) 2.4 kg (250 x 150)

AN1612* 16.34 12.40 6.69 14.76 10.63 5.83 8.12 lb ABP1612A ABP1612S ABP1612N 13.78 x 9.84 AFP1612N AFP1612A

(mm) (415 315 170) (375 270 148) 3.7 kg (350 x 250)

AN2016 20.28 16.34 9.06 18.70 14.57 8.11 14.13 lb ABP2016A ABP2016S ABP2016N 17.72 x 13.78 AFP2016N AFP2016A

(mm) (515 415 230) (475 370 206) 6.4 kg (450 x 350)

AN2416 24.21 16.34 9.06 22.64 14.57 8.11 16.11 lb ABP2416A ABP2416S ABP2416N 21.65 x 13.78 AFP2416A AFP2416A

(mm) (615 415 230) (575 370 206) 7.3 kg (550 x 350)

AN2820 28.94 21.06 10.63 26.57 18.50 9.68 26.23 lb ABP2820A ABP2820S ABP2820N 25.98 x 17.72 AFP2820A AFP2820A

(mm) (735 535 270) (675 470 246) 11.9 kg (660 x 450)

AN3325 32.87 25.00 11.81 30.51 22.44 10.86 35.76 lb ABP3325A ABP3325S ABP3325N 29.53 x 21.65 AFP3325A AFP3325A

(mm) (835 635 300) (775 570 276) 16.2 kg (750 x 550)

AN4032 40.75 32.87 11.81 38.39 30.31 10.86 51.00 lb ABP4032A ABP4032S ABP4032N 37.40 x 29.53 AFP4032A AFP4032A

(mm) (1035 835 300) (975 770 276) 23.1 kg (950 x 750)

* Indicates Single Point Closing System

Add Suffix “HKL” for Keylock Handle