Page 1
APO SERIES
11
Features
APO sizes range consists of nine sizes
from 7” x 6” to 24” x 24” with varying
depths. All AOP enclosures have the
capability to be horizontally or vertically
coupled by means of gasketed coupling
collars.
All bases are gray (RAL 7036) and are hot
compression molded with fiberglass
reinforced polyester. Brass M4 threaded
inserts are factory installed for attachment of
mounting plates.
Covers are made of either clear
polycarbonate or opaque gray (RAL7036)
hot compression molded fiberglass
reinforced polyester.
APO enclosures meet Ingress Protection
standard IP67-11 and IP67-9, respectively
(NBN C20-001 annex A).
Large APO enclosures are maintenance
free and corrosion resistant.
Four to six bosses suitable for M6
threaded inserts are provided in each base.
APO enclosures are suitable for wall or
pole mounting.
These enclosures may easily be modified
with conventional tools such as a drill,
milling equipment, saw or a punch.
Vynckier’s APO enclosures are capable of
withstanding continuous temperatures up to
302 F (150 C).
Clear polycarbonate covers are able to
resist temperatures of up to 248°F (120°C).
APO enclosures provide protection for
equipment and operators from indirect
electrical contact.
PO enclosures are UL listed per UL
Standard 508 and CSA Certified per
Standard C22.2-0, 0.4, 0.7, 0.6, 94 Type
3,3R, 4, 4X, 12 and 13.
Application
Designed for use as insulated electrical
junction boxes, terminal wiring boxes,
instrument housings, and electrical control
enclosures in highly corrosive environments.
Ideal for use in most petro-chemical plants,
sewage plants, electroplating plants, etc. that
may be subject to occasional submersion.
Clear polycarbonate cover provides easy
visual inspection of interior components.
Standards
IEC 439-1
IEC 529 - Rated IP67-11
EN 60439-1
EN 60529
CSA Certified per C22.2 No. 94
Approvals
UL 508 NEMA 3, 3R, 4, 4X,12 & 13
CSA
AS Australian Standards 3131-1991
EExeII, NIEB 88B.102.698 U
LLOYD’S Register of Shipping
BASEEFA
Static Load
Nonmetallic feet:
These mounting feet have been
successfully tested with loads up to
330 lbs.
Stainless steel feet:
These mounting feet have been
successfully tested with loads up to
330 lbs.
Direct corner mounting:
Loads up to 660 lbs. have been
successfully tested.
These are tested loads and are below the
product limitations. However, for high load
appliations, direct corner mounting is
recommended.
APO SERIES
Page 2
34
APO SERIES
FRP NEMA rating 3, 3R, 4, 4X, 12 & 13 enclosures APO with Clear Polycarbonate Cover (CT)
Transparent cover with non-metallic hinges, stainless steel latches and one extention collar
FEATURES
• Bases are made of gray hot-molded
fiberglass reinforced polyester, dyed in
mass
• The cover is made of transparent
polycarbonate
• Protection degree IP66-11 according to
IEC 529 and CENELEC EN 60529
• APO series are UL-listed, per UL
Standard 508 and CSA-certified per
STD C22.2 No. 94 type 3, 3R, 4, 4X, 12
and 13
• Temperature resistance -58°F to +248°F
(-50°C to +120°C)
• Halogen-Free
ACCESSORIES
• Versatile mounting options such as nonmetallic and stainless steel mounting
feet and pole mounting kits
• Coupling accessories such as coupling
cover plates, coupling collars and
coupling bridges
• Locks, carrying handle and air vents
Accessories, see pg. 61
Clear Cover with Non-metallic Hinges, SS
Latches with one Extension Collar
Hinged
Part Outside Inside Backplate Dimensions Aluminum
Numbers H W D h w d Weight Aluminum Steel Non-Metallic H x W Frontplate
A1-706E1CTHPL1 7.32 5.94 6.88 6.54 5.12 5.90 2.78 lb BP706A BP706S BP706N 5.5 x 4.50 FPH706A
(mm) (186 151 175) (166 130 150) 1.3 kg (140 x 114)
A31-1207E1CTHPL2 11.88 7.32 8.26 11.06 5.64 7.28 4.17 lb BP1207A BP1207S BP1207N 9 x 5.50 FPH1207A
(mm) (302 186 210) (281 166 185) 1.9 kg (229 x 140)
A41-1212E1CTHPL2 11.88 11.88 8.26 11.06 11.06 7.28 5.36 lb BP1212A BP1212S BP1212N 10 x 9 FPH1212A
(mm) (302 302 210) (281 281 185) 2.4 kg (254 x 229)
A71-1412E1CTHPL2 14.62 11.88 8.26 13.80 11.06 7.28 6.46 lb BP1412A BP1412S BP1412N 12 x 10 FPH1412A
(mm) (371 302 210) (351 281 185) 2.9 kg (305 x 254)
A81-2212E1CTHPL2 21.93 11.88 10.63 21.10 11.06 9.65 10.83 lb BP2212A BP2212S BP2212N 19 x 12 FPH2212A
(mm) (557 302 270) (536 281 245) 4.9 kg (483 x 305)
A61-2412E1CTHPL2 23.78 11.88 10.63 22.80 11.06 9.65 11.32 lb BP2412A BP2412S BP2412N 21 x 10 FPH2412A
(mm) (604 302 270) (579 281 245) 5.1 kg (533 x 254)
A11-2414E1CTHPL2 23.78 14.68 10.63 22.80 13.80 9.65 13.39 lb BP2414A BP2414S BP2414N 21 x 12.75 FPH2414A
(mm) (604 375 270) (579 351 245) 6.1 kg (533 x 324)
A12-2424E1CTHPL4 23.78 23.78 10.63 22.80 22.80 9.65 20.24 lb BP2424A BP2424S BP2424N 21.88 x 21.88 FPH2424A
(mm) (604 604 270) (579 579 245) 9.2 kg (556 x 556)
Page 3
APO SERIES
35
NON METALLIC
Part Outside Inside Dimensions
Numbers H W D h w d A B C1 C2 E G J K
A1-706E1CTHPL1 7.32 5.94 6.88 6.54 5.12 5.90 1.77 1.65 6.54 5.15 2.79 6.30 3.54 3.74
(mm) (186 151 175) (166 130 150) 45 42 166 131 71 160 90 95
A31-1207E1CTHPL2 11.88 7.32 8.26 11.06 5.64 7.28 1.77 1.65 11.06 6.54 4.12 6.32 4.92 8.27
(mm) (302 186 210) (281 166 185) 45 42 281 166 105 160.5 125 210
A41-1212E1CTHPL2 11.88 11.88 8.26 11.06 11.06 7.28 1.77 1.65 11.06 11.06 4.12 6.32 9.45 8.27
(mm) (302 302 210) (281 281 185) 45 42 281 281 105 160.5 240 210
A71-1412E1CTHPL2 14.62 11.88 8.26 13.80 11.06 7.28 1.77 1.65 13.80 11.06 4.12 6.32 9.45 11.02
(mm) (371 302 210) (351 281 185) 45 42 351 281 105 160.5 240 280
A81-2212E1CTHPL2 21.93 11.88 10.63 21.10 11.06 9.65 3.15 3.05 21.10 11.06 4.12 10.04 9.45 18.35
(mm) (557 302 270) (536 281 245) 80 78 536 281 105 255 240 466
A61-2412E1CTHPL2 23.78 11.88 10.63 22.80 11.06 9.65 3.15 3.05 22.80 11.06 4.12 10.04 9.45 21.12
(mm) (604 302 270) (579 281 245) 80 78 579 281 105 255 240 536
A11-2414E1CTHPL2 23.78 14.68 10.63 22.80 13.80 9.65 3.15 3.05 22.80 13.80 4.12 10.04 12.20 20.12
(mm) (604 375 270) (579 351 245) 80 78 579 351 105 255 310 511
A12-2424E1CTHPL4 23.78 23.78 10.63 22.80 22.80 9.65 3.15 3.05 22.80 22.80 4.12 10.04 21.30 20.12
(mm) (604 604 270) (579 579 245) 80 78 579 579 105 255 541 511
HINGES
FRONT VIEW-COVER REMOVED
DW
C2
K
J
C1
ACCEPTS
M6 INSERT
G
.125 TYP.
B
d
E
H
.08" THICK ALUMINUM
FRONT PLATE (OPTIONAL)
A
.08" THICK ALUMINUM
BACK PANEL (OPTIONAL)
316 STAINLESS STEEL
PADLOCK LATCHES WITH
.375" PADLOCK EYE
M4 x .25
INSERT
h
w
Loading...