VXi BlueParrott Xpressway User Manual

* A Multipoint Connection allows connection of two devices to the headset at the same time. For example, this could be two cell phones, or a phone and a VoIP dongle.

FCC NOTI CE TO USERS; This part compli es with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept

any interference received, including interference that may cause undesired operation. Users are not permitted to make changes or modify the device in any way. Changes or modications not approved

by VXi Corporation will void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC
rule s. These lim its are desi gned to provid e reasonabl e protection ag ainst har mful inter ference in a res idential i nstallati on. This eq uipment gen erates, uses an d can radiate rad io frequen cy energy and , if not
insta lled and use d in accordanc e with the ins truction s, may cause ha rmful inter ference to rad io communi cations. How ever there is no g uarantee that i nterferen ce will not occu r in a parti cular ins tallation . If
this equipment does cause harmful interferen ce to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by
one or more of the following measures: - Reorient or relocate the receiving antennae - Increase the separation between the equipment and the receive - Connect the equipment into an outlet on a circuit
diffe rent from that to w hich the rece iver is connec ted. - Consult t he dealer o r an experie nced radio/T V technici an for help.

CANADA / I C NOTICE TO USER : Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation of the device. This device complies with RSS-210 of Industry Canada. Thi s Class B digital apparatus complies with Canadian ICES- 003 (Cet appareil
numé rique de la cl asse B est confo rme à la nor me NMB- 003 du Cana da).

VXI WARR ANTY:

1. VXi war rants that you r Xpres sway headset s ystem w ill be free fro m defects in mate rial and wor kmanshi p for one ye ar from the date o f purch ase. If, du ring the r st year from th e date of
purch ase, you r Xpressway he adset system fa ils to work du e to a defect i n mater ial or work mans hip, VX i will repai r or replace th e product, at its e lecti on, free of charg e. Without pro of of purc hase,
the war ranty peri od begins on t he date of m anufac ture. Consum able co mponents (for e xampl e, cushions, b attery and f use) are not incl uded in this o ne-ye ar warrant y.

2. The fo regoi ng limited wa rranty does n ot cover equipm ent fail ure attri butabl e to accident, imp roper opera tion, m isuse, abuse, o r any cause othe r than de fects in t he materia ls or wo rkma nship
of VXi’s p roduct s.

3. VXi’s o blig ations unde r this warra nty are limi ted to repa ir or replace ment (at our opti on) of any de fective p art return ed to VXi at the cus tomer ’s expen se. Retur ned product s requi re a Return
Autho rizat ion that may be o btained by call ing 1-80 0-742- 8588. Prod ucts returne d to VXi for repai r under this w arra nty will be ret urn s hipp ed to the cu stome r at VXi’s expens e.

4. THI S LIMITED WARR ANTY IS IN L IEU OF A LL OTHE R WARRAN TIES, EXPRE SS OR IMPLI ED, INC LUDING THE I MPLIED WARRA NTIE S OF MERCHANTA BILITY AN D FITNESS F OR A PARTIC ULAR PURPOS E. Some
jur isdi ction s do not permit t he exclusion o f impl ied warrant ies and the fore goin g exclusions m ay not apply to you .

5. In no even t shal l VXi be respon sibl e for any other da mages w hatsoever, inc ludi ng dir ect, ind irect, specia l, incidenta l, consequent ial, or other d amag es for br each of th is or any other wa rranty,
expre ss or im plied.

VXi Cor poration, 271 Locust Street, Dover, NH 03820 USA 1-800-742-8 588 / 603 -742-2888 / ww w.vxicorp.com / ww w.bluepar rott.com

PN202 556C ©200 9 VXi Corpo ration Print ed in China

HOW TO REPLACE THE AUTO CHARGER FUSE

If the green indicator light on the auto adapter (located next to the USB port) does not light up when plugged into the
power source, check the charger’s inline fuse. Replace with 2A 250V Fast-Blow glass fuse (3AG) if necessary. Fuses are
available at most automotive stores. To replace, unscrew the tip of the auto adapter (see photo, right) and remove the
fuse. Put new fuse in and screw the tip back on.

MODES OF OPERATION BUTTON PRESS LIGHT INDICATORS AUDIO INDICATORS

TURN ON MFB - 3 second press Blue ashes 2 notes rising, followed by short

tone when Bluetooth

connected

TURN OFF MFB - 4 second press Red ashes 2 notes falling, followed by short

tone when Bluetooth disconnected

PAIRING MFB - 6 second press Blue quickly ashing 2 notes rising, followed by 4 notes

rising

ON - NO BLUETOOTH CONNECTION NA Blue double blink NA

ON - BLUETOOTH CONNECTED NA Blue ashing slowly NA

MAKE A CALL Dial from keypad or use Voice Dial NA NA

END A CALL MFB: 1 tap NA 2 notes falling

ANSWER A CALL MFB: 1 tap during ring tone NA 2 notes rising

VOICE DIAL - ACTIVATE / DEACTIVATE MFB: 1 tap NA 1 beep

REJECT A CALL MFB: 1 second press during ring

tone

NA 2 notes falling

LAST NUMBER REDIAL 1 second press of Volume Down

button

NA 1 beep

CALL WAITING - ANSWER / SWITCH BETWEEN CALLS MFB: 2 quick taps NA Beep heard when call is incoming

CALL WAITING - END CALLS MFB: 1 tap to end active call. Tap

once again to answer call on hold.

Tap once more to disconnect

second caller

NA Call on hold will ring the headset

after the active call

is disconnected

TRANSFER AUDIO WHILE ON A CALL 1 second press of Volume Down

button

NA 1 Long tone

SEND CALL ON HOLD TO VOICE MAIL MFB: 1 second press NA Long tone

VOLUME UP / VOLUME DOWN Tap Volume Up or Volume Down

button

NA 1 beep each time tapped

MUTE / UNMUTE 1 second press of Volume Up

button

NA 1 beep. Short beep every 10

seconds while muted

TURN LEDS (LIGHTS) OFF / ON Tap Volume Up and Volume Down

buttons at the same time

Lights go out NA

MULTIPOINT CONNECTION * - ENABLE Tap MFB, Volume Up and Volume

Down buttons all at the same time

NA 4 notes rising

REESTABLISH LOST BLUETOOTH CONNECTION WITH
PHONE (PHONE IS ALREADY PAIRED AND TURNED ON)

MFB: 1 tap Blue ashing slowly NA

LOW BATTERY WARNING NA Red ashes Long tone / 30 sec.

CHARGING IN PROCESS NA Red (not ashing) NA

CHARGING COMPLETE NA Green (not ashing) NA

OPERATIONS GUIDE

TIPS

= Keep microphone positioned near the corner of your mouth. Correct positioning ensures that the noise-canceling

technology works properly.

= If you have not used the headset for an extended period, charge the headset for 3½ hours before using.

Unscrew
Tip

Indicator
Light

CHARGE THE HEADSET

Refer to photos above

= Connect small end of the USB cord into the

headset’s USB charging port.

= Choose Charging Method: Plug other

end of cord into the Auto or AC charger
and then plug the charger into the power
source. Or, to charge the headset on your
computer, plug the USB cord directly into
your computer’s USB port.

= An initial overnight charge is recommended.

Afterwards, charge 3½ hours for a full charge.

Charging Indicator Lights:

Red Light - Charging in process

Green Light - Fully charged

Insert matching size disk into cushion.
Attach headband, then cushion.

OVER­THE-HEAD
WEARING
STYLE

Optional: Attach
receiver cover for
added stability

OVER­THE-EAR
WEARING
STYLE

Attach ear hook

Attach behind-the-neck headband as shown.
Then attach cushion as described in the over­the-head style.

BEHIND­THE-NECK
WEARING
STYLE

PAIR HEADSET WITH PHONE

= Turn off headset.
= Place headset and phone within 3 ft. of

each other. Keep other Bluetooth devices
at least 50 feet away or turn them off.

= Press the MFB on the headset for about

6 seconds until the blue light ashes

continuously.

= Put phone into Bluetooth Discovery Mode

(“Add New Devices”).

= Enter pass code of 0000 when prompted.
= When the blue light changes from a quick

ash to a slower ash, pairing is complete.

COMPONENTS

1. Behind-the-Neck Headband

2. Over-the-Head Headband

3. Ear Cushion Mounting Disks (2 sizes)

4. Leatherette Ear Cushions (2 sizes)

5. Foam Ear Cushions (2 sizes)

6. Xpressway™ Headset

7. Ear Hook

8. Receiver Cover

9. USB Cord

10. Auto Charger

11. Wall Charger

7.

1. 2.

3.

4.

5.

6.

8.

9.

10.

11.

SAFETY INSTRUCTIONS

= Avoid hearing damage. Set volume at lowest comfortable

level. If you experience ringing in your ears or people sound

mufed, stop using the headset. Avoid turning up volume

to block noisy surroundings (it’s possible to adapt to volume

that is too high).

= Check with local and state laws regarding cell phone

handset usage while operating a motor vehicle.

= Do not immerse any part of this product in water.

= Plastic bags and small parts may cause choking if ingested

Keep them away from small children and pets.

= Use only the power cords included with this product.

= Avoid temperatures exceeding 140°F.

TALK TIME AND RANGE

Range: Up to 66 feet. Certain conditions

and obstructions, such as wireless
devices, placing the phone on a metal
surface (such as the hood of a car),
walls, etc. can reduce range.

Talk Time Duration: 16+ hrs on a full charge
Standby Time Duration: Up to 150 hours

on a full charge

Multifunction Button
(MFB)

Volume Up Button

Volume Down Button

USB Charging Port

If the headband is too tight, pull
ends outward to w iden the band.

®

Xpressway™
USER GUIDE

Convertible!
3 wearing
styles

Compati ble w ith mos t Blueto oth pho nes & Bluetooth

enabl ed compu ters ( Wind ows® o r Maci ntosh®)