VXI X200 Instructions Manual
1. VXi warrants that your product will be free
from defects in material and workmanship
for two years from the date of purchase. If,
during that period from the date of purchase,
your product fails to work due to a defect
in material or workmanship, VXi will repair
or replace the product, at its election, free
of charge. Without proof of purchase, the
warranty period begins on the date of
manufacture. Consumable components (for
example, cushion, battery and fuse) are not
included in this warranty.
2. The foregoing limited warranty does not
cover equipment failure attributable to
accident, improper operation, misuse, abuse, or
any cause other than defects in the materials
or workmanship of VXi’s products.
3. VXi’s obligations under this warranty are
limited to repair or replacement (at our
option) of any defective part returned to
VXi at the customer’s expense. Returned
products require a Return Authorization that
may be obtained by calling 800-742-8588
or visit the support section of our website at
www.vxicorp.com. Products returned to VXi
for repair under this warranty will be return
shipped to the customer at VXi’s expense.
4. THIS LIMITED WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some jurisdictions do
not permit the exclusion of implied warranties
and the foregoing exclusions may not apply
to you.
5. In no event shall VXi be responsible for any
other damages whatsoever, including direct,
indirect, special, incidental, consequential, or
other damages for breach of this or any other
warranty, express or implied.
VXi Limited Warranty
VXi Limited Warranty
271 Locust Street • Dover, NH 03820 USA
800-742-8588 • 603-742-2888
www.vxicorp.com
PN202947A ©2010 VXi Corporation Printed in China
X200 USB ADAPTER
Compatible with Windows®
and Macintosh® operating systems
Modular plug
X200 USB ADAPTER
Compatible with Windows® and
Macintosh® operating systems
QD
1. Insert the modular plug into the X200 USB adapter.
2. Insert the USB connector into a USB port on your computer
(not into the keyboard).
3. Connect the QD to your VXi headset.
4. Check the audio settings (speaker and microphone) on
your softphone and in Windows to ensure that the initial
settings are at an appropriate level.
Connecting the X200 USB Adapter
Installing the X200 USB Adapter
For Windows Me or higher: Installation is automatic once
inserted into the USB port of your computer.
For Macintosh: Please visit the X200 USB Adapter support
section at www.vxicorp.com for more information.
USB connector
USB adapter
Volume up
Answer/end call*
Mute
Volume down
* When supported by softphone
Loading...