VXI VoxStar UC User Manual
Compatible with most Bluetooth® phones and Bluetooth-enabled computers (Windows® or Macintosh®)
USER GUIDE
VoxStar
™
UC
VXi VoxStar UC User Guide
2
SAFETY INSTRUCTIONS / GLOSSARY
SAFETY INSTRUCTIONS
• Avoid hearing damage. Set volume at lowest comfortable level. If you experience ringing in your ears or voices
sound muffled, stop using the headset. Avoid turning up volume to block noisy surroundings (it’s possible to
adapt to volume that is too high).
• Check with local and state laws regarding cell phone/headset usage while operating a motor vehicle.
• Do not immerse any part of this product in water.
• Plastic bags and small parts may cause choking if ingested. Keep them away from small children and pets.
• Use only the power cords included with this product.
• Avoid temperatures exceeding 140° F (will cause equipment failure).
GLOSSARY OF TERMS
On: Headset is on, but there is no connection to the phone (blue light, double flash).
MFB: Abbreviation for “Multifunction Button.”
Multipoint Mode: Multipoint Mode allows you to pair and switch between two Bluetooth devices.
Paired: Two Bluetooth devices agree to communicate with one another.
Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call (blue light flashes slowly).
Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call (blue light flashes slowly).
VXi VoxStar UC User Guide
3
TABLE OF CONTENTS
4 Package Contents
5 Proper Fit and Placement
6 Other Wearing Styles
8 Charging the Headset
9 Battery Power Indicators
10 Headset Controls
11 On/Standby/Off
12 Pairing with a Cell Phone
13 Pairing with BT2 USB
Adapter
14 Multiple Device Pairing
15 Multipoint Mode
17 Proximity Pairing
18 Making a Call
19 Answering a Call
20 Operation While Using the
Charger/Adapter
21 Additional Functions
Last Number Redial
Rejecting a Call
Voice Dial
Transfer Audio
Turn Indicator Lights
On/Off
Automatic Bluetooth
Connection
23 Reset Paired Devices List
24 Call Waiting/
Rejecting a Call
25 Specifications
26 Functions & Indicators
31 WARRANTY
32 FCC Notice to Users
33 IC Notice to
Canadian Users
VXi VoxStar UC User Guide
4
PACKAGE CONTENTS
1. BT2 Bluetooth® USB Adapter
2. VoxStar™ Headset with Ear Hook
3. Cheek Pad
4. Foam Ear Cushions (1 small and 1 large)
5. Rubber Ear Cushion
6. Headband/Over-the-Head Wearing Style
7. Neckband/Behind-the-Neck Wearing Style
8. Contoured Ear Buds (1 small, 1 medium,
and 1 large)
9. Ear Bud Adapter Ring
10. USB Charging Cable
11. AC Adapter
12. Quick-Start Guide (not shown)
Images are not shown to scale
10
1
2
3
8
5
4
9
7
6
11
VXi VoxStar UC User Guide
5
PROPER FIT AND PLACEMENT
To get the best performance from our noise-canceling technology, position the microphone near the corner of
your mouth. Positioning is important; small adjustments in microphone placement can improve performance.
The VXi VoxStar UC offers three wearing styles to ensure optimal fit and comfort: earhook, headband and neck
band. To attach the headset to the wearing style of your choice, please refer to the following photos.
Multiple sizes of ear tips are included. Choose the size that gives you the optimal fit.
Ear Bud Assembly
VXi VoxStar UC User Guide
6
OTHER WEARING STYLES
Over-the-head wearing style: Attach to headband as shown. Add foam or rubber ear cushion. Place the ear
hook over your ear and mold it so it fits securely and comfortably.
Optional cheek pad
goes here
Optional cheek pad goes here
Over-the-ear wearing style: Attach to ear hook as shown. Add foam or rubber ear cushion and optional
foam cheek pad. Place the ear hook over your ear and mold it so it fits securely and comfortably.
VXi VoxStar UC User Guide
7
Behind-the-neck wearing style: Attach to headband as shown. Add foam or rubber ear cushion.
Optional cheek pad
goes here
OTHER WEARING STYLES
VXi VoxStar UC User Guide
8
CHARGING THE HEADSET
Connect charger cord into the headset’s charging port. The MFB’s indicator light may turn
blue for several seconds while the headset
determines the level of charge the battery is
holding. Do not remove the headset from the
charger. If the headset is not fully charged, the
indicator will turn RED within a short period
(less than 3 minutes). When the indicator
turns blue—and stays blue—the unit is fully
charged. It could take approximately 2.5 hours
to achieve a complete charge.
Headset Charging Port
USB Charging Cable
& AC Adapter
VXi VoxStar UC User Guide
9
BATTERY POWER INDICATORS
While charging, the MFB’s indicator light shows
the level of battery power on your VXi VoxStar
as follows:
Blue light: Fully charged. Over 7 hours’
talk time.
Red light: Less than a full charge.
For best performance, keep charging headset
when not in use.
Indicator Light
VXi VoxStar UC User Guide
10
HEADSET CONTROLS
Volume Increase: Quickly press and release
the Volume Up/Mute button. Repeat until
desired volume is attained.
Volume Decrease: Quickly press and release
the Volume Down button. Repeat until desired
volume is attained.
Microphone Mute/Un-Mute While on a call,
hold down the Volume Up/Mute button for 2
seconds until you hear a beep. A mute reminder
beep will be heard every 10 seconds. Repeat
to un-mute.
Multifunction Button
(MFB)
Volume Down
Indicator Lights
Volume Up/
Mute
VXi VoxStar UC User Guide
11
ON / STANDBY / OFF
Turn Headset On: Hold down the MFB for approximately 2-3 seconds until you hear a voice
prompt, “Power on.” The blue light will flash twice every second.
Standby Mode: Once the headset is turned on (after the initial pairing), it will attempt to connect
to the last device that it was paired with, putting itself into Standby Mode. (The headset can also
be put into Standby Mode with a quick press and release of the MFB). The blue light will flash
indicating an active Bluetooth link. The headset will give a voice prompt (in English), “Your headset
is connected.”
Turn Headset Off (conserves battery power): Hold down the MFB for approximately 3-4 seconds
until you hear a voice prompt (in English), “Power off.” A red light will flash 4 times and the headset
will turn off.
Loading...