VXI TuffSet TuffSet 15, TuffSet 10, TuffSet 15, Tuffset 20, Tuffset 37 Convertible Technical Specifications

...
TuffSet 10
TuffSet 20
TuffS et 37 Convertible
Headset Technical Specifications
TUFFSET 10 / TUFFSET 20
TRANSMIT SPECIFICATIONS
Microphone: Noise canceling electret Sensitivity: -50dB @ 1kHz (defined 1" from talk­side, 82dB SPL) Current consumption: 300uA max Operating Voltage: DC 1.0V min. to 20V max.
RECEIVE SPECIFICATIONS
Speaker: Dynamic; 36mm diameter SPL: 90db @ 1kHz, 0.55V input Impedance: 300 Ohms Frequency response: 200Hz to 5 kHz Rated input: 10mW continuous, 100mW peak
MECHANICAL SPECIFICATIONS
Cables: Standard wire, PVC insulation, polyurethane jacket Connectors: 4 Pin Quick Disconnect Mic boom: Flexible, with positioning memory; swivels 270° Mounting: Left or right ear placement Headband: Stainless steel, adjustable; ratchet positioning Operating Current: 300uA max. Operating Voltage: DC 1.0V min. to 20V max.
TUFFSET 37 CONVERTIBLE
TRANSMIT SPECIFICATIONS
Microphone: Noise canceling electret Impedance: Low. (~300 Ohm) Sensitivity: -36 dB / Pa. (=16mV) DC current: 0.5 mAA. (At 3V./2.2 k.Ohm)
RECEIVE SPECIFICATIONS
Impedance: 300 Ohm Sound Pressure: 96 dB (At 1 k.Hz./ 1mW) Frequency response: 300 Hz. To 3400 Hz. Sound Pressure Peak Max: 112 dB (Limited by built-in protective circuit)
MECHANICAL SPECIFICATIONS
Cables:Thin, high flexible and ultra high strength 4 conductor cable. Connectors: 4 Pin Quick Disconnect Flexible microphone boom.
TUFFSET 15 / TUFFSET 25 NOISE ATTENUATING
TRANSMIT SPECIFICATIONS
Microphone - electret noise canceling Frequency response - 200~10KHz Impedance: 1.8 k Sensitivity: -87dB+5dB AT 1KHz 1.5v Current consumption - 400 Microamp/Max Operating voltage: 3.0 V Test voltage - 1.5 volts
RECEIVE SPECIFICATIONS
TuffSet 15
VXI CorporationOne Front StreetRollinsford, NH 03869www.vxicorp.com800-742-8588 603-742-2888
TuffSet 25
Type - Magnetic type unit Voice Coil Impedance - 300ohms Sound Pressure Level - 100dB+/-4dB c1kHz Impedance (Monaural): 150 Ohms +20% at 1kHz Impedance (Binaural): 75 Ohms +20% at 1kHz Frequency response: 100 Hz to 6.3 kHz Rated Power: 50m
MECHANICAL SPECIFICATIONS
Cables: polyurethane jacket, PVC resin Connectors: 4-pin quick disconnect Microphone boom: Highly flexible gooseneck boom Headband - Covered stainless steel, adjustable Ear cushion - PVC leather Weight - (without lower cord) TuffSet 15: 7.2oz TuffSet 25:11 oz
Loading...