VXI TALKPRO USB100, TALKPRO MAX-2, TALKPRO MAX, TALKPRO USB200 User Manual
Tal kPro
TM
The Power of Voice.
TalkPro XPress
TalkPro
TalkPro XPress
Technical Specifications
TALKPRO / TALKPRO XPRESS
MICROPHONE SPECIFICATIONS
Microphone: Gentex noise canceling
Ambient noise suppression: 13dB @ 1 kHz, typical
Output impedance: 1.8 kOhms typical
Sensitivity: -54dB @ 1kHz (defined 1" from talk-side, 82dB SPL)
Signal to noise ratio: More than 50dB
Frequency response: 100Hz to 6.3 kHz
Operating current: 300uA max
Operating voltage: 1.0 V DC min. to 20 V DC max.
RECEIVE SPECIFICATIONS
Speaker: Dynamic, 36mm diameter
SPL: 90dB @ 1 kHz, 0.22 V input
Impedance: 32 Ohms
Frequency response: 100 Hz to 6.3 kHz
Rated input power: 10 mW continuous, 100 m W peak
MECHANICAL SPECIFICATIONS
Cables: Stranded wire, spiral shield, polyethelene insulation, PVC jacket
Connection: MIC: 3.5mm stereo plug with tip and ring wired independently.
SPEAKER:3.5mm stereo plug with tip and sleeve wired to speaker; ring open
Microphone Boom: Flexible gooseneck / Swivels 270 degrees for left or right ear placement
Headband: Stainless steel adjustable band; Ratchet positioning
Weight (without cord): 1.5 oz
Cord: Single cord terminates with 3.5mm plugs. No quick disconnect.
Cord Length: TalkPro 10' 8" / TalkPro XPress 10' 4"
TalkPro USB
100/200
TalkPro
Max / Max-2
TALKPRO MAX / MAX-2 / USB100 / USB200
MICROPHONE SPECIFICATIONS
Microphone: Gentex noise canceling
Ambient noise suppression: 13dB @ 1 kHz, typical
Output impedance: 1.8 kOhms typical
Sensitivity: -54dB @ 1kHz (defined 1" from talk-side, 82dB SPL)
Signal to noise ratio: More than 50dB
Frequency response: 100Hz to 6.3 kHz
Operating current: 300uA max
Operating voltage: 1.0 V DC min. to 20 V DC max.
RECEIVE SPECIFICATIONS
Speaker: Dynamic, 36mm diameter
SPL: 99 + 3dB (MEAN VALUE @ 0.8, 1.0, 1.2, 1.5 KHz)
Impedance: 300 Ohms
Frequency Response: 190 To 5.2 KHz
Rated Input Power: 40 mW continuous, 100 mW maximum
MECHANICAL SPECIFICATIONS
Cables: Stranded wire, PVC Insulation, polyurethane jacket
TalkPro Max Connection: Mic- 3.5mm stereo plug with tip and ring wired independently
Speaker- 3.5mm stereo plug with tip and sleeve wired to speaker; ring open
Inline pendant: plastic with mod plug connection for lower cord.
TalkPro USB Connection: USB sample rates down sampled by host: 8, 11.025, 22.05, 44.1 kHz,
normal USB sample rate 48kHz
Microphone Boom: Flexible gooseneck / Swivels 270 degrees for left or right ear placement
Headband: Stainless steel adjustable band; Ratchet positioning
Weight (without cord): Monaural - 1.5 oz / Binaural - 2 oz
Cord: Upper and lower cords connected via quick disconnect style pendant
Cord Length: TalkPro Max 10' 2" / TalkPro USB 10' 7"
VXI Corporation One Front Street Rollinsford, NH 03869 www.vxicorp.com 800-742-8588 603-742-2888
Tal kPro
The Power of Voice.
TalkPro SP1
Compatible with:
CT Switch
Passport V-series USB Cord
QD1030 Sound Card Cord
TM
Technical Specifications
TALKPRO SP1/ SP2
MICROPHONE SPECIFICATIONS
Microphone: Gentex noise canceling
Ambient noise suppression: 13dB @ 1 kHz, typical
Output impedance: 1.8 kOhms typical
Sensitivity: -54dB @ 1kHz (defined 1" from talk-side, 82dB SPL)
Signal to noise ratio: More than 50dB
Frequency response: 100Hz to 6.3 kHz
Operating current: 300uA max
Operating voltage: 1.0 V DC min. to 20 V DC max.
TalkPro SP2
RECEIVE SPECIFICATIONS
Speaker: Dynamic, 36mm diameter
SPL: 99 + 3dB (MEAN VALUE @ 0.8, 1.0, 1.2, 1.5 KHz)
Impedance: 300 Ohms
Frequency Response: 190 To 5.2 KHz
Rated Input Power: 40 mW continuous, 100 mW maximum
MECHANICAL SPECIFICATIONS
Cables: Stranded wire, PVC insulation, polyurethane jacket
Connectors: Gold plated; quick disconnect
Microphone Boom: Flexible gooseneck / Swivels 270 degrees for left or right ear placement
Headband: Stainless steel adjustable band; Ratchet positioning
Weight (without cord): Monaural - 1.5 oz / Binaural - 2 oz
Cord: Terminates in a quick disconnect connector
Cord length: 2' 1"
CT Switch
Compatible with:
TalkPro SP Headsets
CT SWITCH
TELEPHONE TRANSMIT PATH FROM HEADSET
Output Network: AC coupled, transformer isolated, self-configuring for electret, dynamic, or
carbon type telephone.
Output Level: Auto-setting for telephone type with manual fine adjustment
Transmit Adjustment: -10dB max to -3 dB min.
Mic Sensitivity: -53dB at 82 dB SPL at 25mm
TELEPHONE RECEIVE PATH TO HEADSET
Input Impedance: 300 Ohms
Volume Control: +20dB max to -6dB min.
Output Level: 94 dBA at max. volume with headset supplied, 300 Ohm receive; AGC circuit
limited
OPERATING POWER
120 VAC adapter supplied providing 12 VDC, 100 mA output for USA and Canada. European
and UK adapters available.
MIC OUTPUT TO COMPUTER
Output Level: -50dB at 82 dB SPL at 25mm
Output Impedance: 2.2 k Ohms
SPEAKER INPUT FROM COMPUTER
Input Impedance: 500 Ohms, transformer isolated
Output Level to Headset: -4 dB rel. to output from computer
Acoustic Output: 105 dBA max
MECHANICAL SPECIFICATIONS
Plastic housing
Weight (without cords): 5.1oz
Cords: 18' modular cord to telephone. 10' modular coil cord. Quick disconnect compatible
with TalkPro SP or TuffSet style headsets. 7' 7" cord to computer with two 3.5mm (mic and
speaker) plugs.
VXI Corporation One Front Street Rollinsford, NH 03869 www.vxicorp.com 800-742-8588 603-742-2888
Loading...