VXI Parrott Bermuda, Parrott Montego User Manual

Fold

Fold

Fold

Fold

Fold

Fold

Parrott

™

Bermuda/Montego

Headset

User Guide

2

Choosing a Side

1

Connecting Your Headset
to Your PC

Insert the plugs as shown in the drawing. The pink
plug is inserted into the microphone input (

),
and the lime green plug is inserted into the line
output (speaker) (

) of the PC sound I/O port.

Montego shown

Part #: 200772A

A/W#: 200773A

Art size: 16" x 5.25"

Fold size: 4" x 5.25"

Color: 1/0 Black

Paper Stock: 65lb. Finch White Opaque Vellum Cover

Determine the side of your head you would prefer
to locate the microphone. Swivel the microphone
boom as shown. If you wear the microphone on
the left side of your face, be aware that the left and
right stereo channels will be reversed.

If you have headset questions, please contact:
VXI Corporation Technical Support [phone]

Headquarters [phone]

email [e-mail]

website www.vxicorp.com

3

Adjust the headband to fit your head by
sliding it in or out. Swivel to adjust the
position of the microphone boom and
bend the boom so that the micro­phone is close to your mouth.

Position the microphone so it is
located one finger-width from
the corner of your mouth, with
the word “TALK” facing your
mouth.

Adjustment

Fold

Fold

Fold

Fold

Fold

Fold

The quick-disconnect freedom feature allows
you complete freedom to move around while
still wearing the headset. Just press the rubber­ized tab on the connector and pull it out of the
pendant. To reconnect, snap the connector back
into the pendant.

The Quick-Disconnect
pendant provides a vol­ume control for the
earphone(s), and a push

on/push off microphone

mute button. To adjust

the volume,

rotate the

volume control
knob to a comfortable listening level. To mute
the microphone, push the button in. Push again
to activate the microphone. The button must be
out to activate the microphone.

4

Quick-disconnect
Freedom Feature

Volume
Control

Microphone

Mute

5

Parrott Translator

™

The VXI Parrott Translator

™

provides universal
compatibility between your
headset and any soundcard.

Adding two AA batteries to
the Translator may improve
your headset performance. To
determine whether you need
batteries with your particular sound card,
press the button on the top of the Translator:

LED ON Batteries not needed
LED OFF Add two (2) AA batteries

To install or change the batteries:

1. Turn the Translator over so the bottom is facing you.

2. Push the cover in the direction of the embossed
arrow and ribs to slide the cover off.

3. Inst all two AA batteries. Slide the cover back on in
the opposite direction.

4. The batteries should be replaced once a year.

To test the batteries for replacement, press the button

on top of the Translator:

LED ON Batteries OK, check in three months
LED OFF Replace batteries

P/N 200772A ©2000 VXI CORPORATION

VXI LIMITED WARRANTY

1. If any VXI headset or amplifier fails to work for any reason during the first two years
from the date of purchase as shown by the purchaser’s warranty registration, VXI
will repair or replace the headset or amplifier, at its election, free of charge.
Without warranty registration, the warranty period begins on the date of
manufacture. All products returned to VXI after the two-year warranty period will
be repaired as “out of warranty” products, and purchaser will be billed for such
repairs pursuant to the Out-of-Warranty Repair provisions set forth below.

2. The obligations of VXI under this warranty shall be limited to repair or replace­ment (at our option) of any part returned, freight pre-paid to VXI.

Returned products require a Return Authorization that may be requested from VXI
at 800-742-8588 or www.vxicorp.com.

3. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some jurisdictions do not permit the exclusion of implied warranties and the
foregoing exclusions may not apply to you.

4. In no event shall VXI be responsible for any other damages whatsoever including
direct, indirect, special, incidental, consequential or otherwise for breach of this or
any other warranty, express or implied.

5. Products returned to VXI for Warranty and Out-of-Warranty repairs, freight prepaid
and with proper Returned Authorizations, will be return shipped to the customer at
VXI’s expense within five (5) days of VXI’s receipt of payment.

OUT-OF-WARRANTY REPAIRS

VXI will repair out-of-warranty headsets or amplifiers for a charge of $22.50 each (or
such other charge as may be applicable as of the date of receipt by VXI). See return
details above. Out-of-warranty repairs are warranted to be free from defects in material
and workmanship for ninety (90) days.