VXI LIMITED WARRANTY
CP100 HEADSET
1. VXI warrants that your CP100 headset will be free from defects in material and workmanship for two
years from the date of purchase. If, during the first two years from the date of purchase, your CP100
headset fails to work due to a defect in material or workmanship, VXI will repair or replace the product, at
its election, free of charge. Without proof of purchase, the warranty period begins on the date of
manufacture.
2. The foregoing limited warranty does not cover equipment failure attributable to accident, improper
operation, misuse, abuse, or any cause other than defects in the materials or workmanship of VXI's
products.
3. VXI's obligations under this warranty are limited to repair or replacement (at our option) of any defective
part returned to VXI, freight prepaid. Returned products require a Return Authorization that may be
obtained by calling customer service at 1-800-742-8588.
4. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some jurisdictions do not permit the exclusion of implied warranties and the
foregoing exclusions may not apply to you.
5. In no event shall VXI be responsible for any other damages whatsoever, including direct, indirect,
special, incidental, consequential, or other damages for breach of this or any other warranty, express or
implied.
6. Products returned to VXI for in-warranty, freight prepaid and with proper Return Authorization, will be
return shipped to the customer at VXI's expense.
For customer service, please call:
VXI Corporation
1-800-742-8588 or 603-742-2888
Technical support is available on our web site at: www.vxiparrott.com
For cordless or mobile phones
© 2004 VXI Corporation
VXI CORPORATION
One Front Street, Rollinsford, NH 03869
603-742-2888 Toll free 1-800-742-8588
email: info@vxiparrott.com website: www.vxiparrott.com
PN 201705A
COMPONENTS
1. Adjustable headband
2. T-Bar
3. Receiver / ear cushion
2. CHOOSE A SIDE FOR THE MICROPHONE
Determine which side of your head you would
1
2
8
prefer to locate the microphone. Swivel the
microphone boom as shown.
4. Flexible microphone boom
5. Noise canceling microphone
6. 2.5mm connector
7. Express Disconnect
8. Microphone boom swivels for left
or right side wear
TM
7
OPERATION
1. CONNECT HEADSET TO YOUR
CORDLESS OR MOBILE PHONE
For cordless or mobile phones with a compatible 2.5mm
jack. insert the 2.5mm plug directly into the headset jack
on the phone.
3
4
5
6
3. MICROPHONE ADJUSTMENT
Position the microphone so it is located one finger-width
from the corner of your mouth just below your bottom lip.
The microphone has the word TALK or a painted dot
printed on it (under the cushion). Be sure that this mark is
facing your mouth.
"TALK" or a painted dot
4. USING THE EXPRESS DISCONNECT
To quickly disconnect the headset from the lower cord, simply grasp both sides
of the Express Disconnect (avoid pulling on the cord) and
pull them apart.
To reconnect the headset to the lower cord again, take note of the markings on
either side of the connectors. Match up the markings
and push the two sides of the connector firmly together again.
For mobile phones requiring an adapter, insert the 2.5mm
plug into the headset jack on the adapter.
For customer assistance, please call VXI at 1-800-742-8588 or visit
our website at www.vxiparrott.com.
Loading...