VXi BlueParrott
®
B350-XT
User Guide
VXi BlueParrott®B350-XT User Guide PAGE 2
TABLE OF CONTENTS
Safety Information ..........................................3
Package Contents ..........................................4
Glossary of Terms ............................................5
Headset Overview ..........................................6
Charging the Headsets ....................................7
• Battery Power Indicators
• Operation While Using the Charger/Adapter
Getting Started ................................................9
• On/Off/Standby
• Pairing with a Phone
i. NFC Pairing
ii. Regular Pairing
• Wearing and Adjusting the B350-XT
• Making/Taking Calls
Parrott Button ................................................13
Advanced Features and Functions..................14
• Multiple Device Pairing
• Multipoint Mode
• Proximity Pairing
• Additional Features and Functions
i. Last Number Redial
ii. Call Waiting/Rejecting a Call
iii. Rejecting a Call
iv. Phone Voice Control
v. Muting
vi. Transferring Audio
vii. Turn Headset Indicator Lights On/Off
• Resetting Headset Paired Devices List
Functions & Indicators Table ..........................18
Specifications ................................................24
• Check with local and state laws regarding cell phone/headset usage while operating a motor vehicle.
• Do not immerse any part of this product in water.
• Plastic bags and small parts may cause choking if ingested. Keep them away from small children and pets.
• Use only the power cords included with this product.
• Avoid temperatures exceeding 140° F (will cause equipment failure).
VXi BlueParrott®B350-XT User Guide PAGE 3
SAFETY INFORMATION
IMPORTANT SAFETY NOTE: Prolonged exposure to high volume levels can damage your hearing. To avoid
injury, set the volume to the lowest comfortable level. If you experience ringing in your ears, or voices
sound muffled, stop using the headset. Avoid turning up the volume to block noisy surroundings. It’s
possible for your ears to adapt to volume that is too high, and this could result in permanent hearing
damage without any noticeable discomfort.
VXi BlueParrott®B350-XT User Guide PAGE 4
PACKAGE CONTENTS
1. B350-XT™ Headset with Leatherette Ear Cushion
2. Spare Foam Ear Cushion
3. Spare Microphone Windscreen
4. USB Charging Cable
5. AC/DC Wall Charger
6. Auto (DC) Adapter
7. Quick-Start Guide*
8. Warranty and Compliance Document*
*Not pictured.
2
3
1
5
4
Images are not shown to scale.
6
VXi BlueParrott®B350-XT User Guide PAGE 5
GLOSSARY OF TERMS
• On: Headset is on, but there is no connection to the phone
(red light will flash).
• MFB: Abbreviation for “Multifunction Button.”
• Multipoint Mode: Multipoint Mode allows you to connect and switch between two Bluetooth devices.
• Paired: Two Bluetooth devices agree to communicate with one another.
• Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call
(blue light will flash).
• Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call
(blue light will flash).
E
A
D
B
F
C
VXi BlueParrott®B350-XT User Guide PAGE 6
HEADSET OVERVIEW
A. Flexible Microphone Boom (White dot indicates "talk" side.)
B. Volume Down
C. Volume Up/Mute
D. Multifunction Button (MFB)
E. Indicator Lights
F. Parrott Button
VXi BlueParrott®B350-XT User Guide PAGE 7
CHARGING THE HEADSET
Connect USB charger cord into the headset’s
USB charging port. If the headset is not fully
charged, the indicator will turn red. When the
indicator turns blue and stays blue the unit is
fully charged. A fully discharged battery will
need approximately 3.5 hours to achieve a
complete charge.
Battery Power Indicators
While charging, the MFB’s indicator light
shows the level of battery power on your
B350-XT as follows:
Blue light: Fully charged. Over 24 hours’
talk time.
Red light: Less than a full charge.
For best performance, keep charging
headset when not in use.
AC Charger
Auto (DC) Charger
Headset Charging Port
Indicator Lights
VXi BlueParrott®B350-XT User Guide PAGE 8
CHARGING THE HEADSET (continued)
Operation While Using the Charger/Adapter
The B350-XT headset will operate from battery power or from the AC or DC charger/adapter.
NOTE: Do not attach the charger mid-call. This will cause the headset to reset, and the call will be sent
back to the phone.
When the headset is operating from the battery, all indicator lights and sounds will function as described
in this guide.
When the headset is operating from the charger/adapter, the headset—including the audio indicators—
will function as described in this user guide. However, the MFB lights will indicate the battery charge status.
While the headset is on the charger, press the MFB long enough to power the unit on. The headset should
reconnect automatically unless your phone is set to “always ask” for connection requests.
After the battery is fully charged, the MFB charge light will turn blue and stay blue as long as the
charger/adapter is connected to the headset. While the headset is fully charged and the charge light
is blue, the blue indicator light will also be on if the headset is powered on.
VXi BlueParrott®B350-XT User Guide PAGE 9
GETTING STARTED
On/Off/Standby
Turn Headset On: Hold down the MFB for approximately 2-3 seconds until you hear a voice prompt,
“Power on.” The red light will flash once every second.
Turn Headset Off (conserves battery power): Hold down the MFB for approximately 4–5 seconds until
you hear a voice prompt, “Power off.” A red light will flash 4 times and the headset will turn off.
Standby Mode: Once the headset is turned on (after the initial pairing), it will attempt to connect to the
last device that it was paired with, putting itself into Standby Mode.
Pairing with a Phone
NFC (One-Touch) Pairing
1. Make sure that NFC is enabled on your cell phone.
2. Place the NFC zone of your cell phone against the NFC zone
of the headset and hold together until your cell phone
confirms pairing is successful.
Note: NFC and One-Touch Pairing are dependent on your cell
phone. The size and sensitivity of your phone’s NFC zone and how
to connect the headset may vary between devices.
VXi BlueParrott®B350-XT User Guide PAGE 10
GETTING STARTED (continued)
Manual Pairing
Placing Headset into Pairing Mode
With the headset powered off, press the MFB until the light rapidly flashes blue and you hear the audio
prompt “Power on.” Keep holding the MFB for approximately 10 seconds until you hear
“Discovering.” Headset will be visible for pairing to devices for 120 seconds.
Pairing to a Cell Phone
1. Make sure that other Bluetooth devices are turned off or out of range.
2. Place headset into pairing mode.
3. Put your cell phone in Bluetooth Search/Scan Mode per the manufacturer’s instructions.
4. Select “VXi B350-XT” to pair. (Passcode is “0000” if needed.)
5. When connected, the headset will give you the voice prompt, “Your headset is connected” (in English).
VXi BlueParrott®B350-XT User Guide PAGE 11
GETTING STARTED (continued)
Wearing and Adjusting the B350-XT
To get the best performance from our noise-canceling technology, position the microphone near the corner of your mouth. Positioning is important; small adjustments in microphone placement can improve
performance.
1. Place the headset on your head.
2. Position the speaker directly on your ear. You can slide
the headband in or out of the side support for proper fit.
3. Position the microphone about one finger’s width away
from your face at the corner of your mouth. The boom
will rotate so you can position the microphone correctly
with the speaker on either ear.
4. The headband is also very flexible and can be adjusted
by gently flexing outward to loosen or inward to tighten.
4
VXi BlueParrott®B350-XT User Guide PAGE 12
GETTING STARTED (continued)
Making/Taking Calls
The headset must be on and connected with your phone.
Making a Call
1. Dial the desired number on your phone. You will hear the call in the headset.
2. To end the call, press the MFB once. The call will end and the headset will enter standby mode.
Answering a Call
1. When you receive a call, you will hear ring tones in the headset. Press the MFB once to answer the call.
2. To end the call, press the MFB once. The call will end and the headset will enter standby mode.
Rejecting an Incoming Call
1. To reject an incoming call, press and hold the MFB for two seconds. You will hear a two-note descending
tone and the call will be transferred to your voicemail (if available).
VXi BlueParrott®B350-XT User Guide PAGE 13
PARROTT BUTTON
As provided from the factory, the headset’s Parrott
Button provides an easy way to mute the headset.
However, you can also configure the button for other
functions, such as a speed dial button for a dedicated
phone number, or to launch a particular application
on your phone.
To change the Parrott Button functions, you will need
to download an app for your phone (Android or iOS)
or to your PC. Go to vxicorp.com/parrott for updates
and more information.
VXi BlueParrott®B350-XT User Guide PAGE 14
ADVANCED FEATURES AND FUNCTIONS
Multiple Device Pairing and Multipoint Mode
The B350-XT has pairing memory for up to 8 devices. The headset can also use Multipoint Mode, which
means that it can be connected to two Bluetooth devices at the same time. You do not have to do
anything to enable Multipoint Mode.
Using the B350-XT in Multipoint Mode
1. To use the headset in Multipoint Mode, first make sure the headset is paired with both your devices.
2. With both devices in range and with their Bluetooth enabled, turn the headset on.
3. As each Bluetooth device connects to the headset, you will hear the voice prompt,
“Your headset is connected.”
The B350-XT will monitor both phones and enable you to answer a call on either one from the headset.
If you are on a call and the other device receives a call, you will hear a notification in the headset.
Proximity Pairing
Proximity Pairing is an alternative method of pairing where the headset initiates the pairing process
instead of your phone.
1. Make sure the headset is powered on and not connected to another device.
2. Set your phone so it is “Discoverable,” or visible to other devices.
3. Quickly press the MFB and the Volume Down button.
4. You should hear the voice prompt “Discovering” in the headset.
5. The headset lights should now be alternating red and blue.
6. The headset initiates pairing activity, and the incoming pairing request must be accepted on the phone.
NOTE: This may include entering the pin number “0000” (four zeros).
VXi BlueParrott®B350-XT User Guide PAGE 15
ADVANCED FEATURES AND FUNCTIONS (continued)
Additional Features and Functions
i. Last Number Redial
To redial the last number that was dialed from the cell phone, press and hold the Volume Down button for
approximately 1 second. A beep will be heard and the phone will redial the last number.
ii. Call Waiting/Rejecting a Call
If you are on an active call and a second call comes in, you will hear a low tone notification in the
headset. Where supported by your phone, you can either accept the incoming call and end the active
call, accept the incoming call and place the active call on hold, or reject the incoming call and continue
the active call.
• To accept the incoming call and end the active call, press the MFB once to end, and then once again to
answer.
• To accept the incoming call and place the active call on hold, quickly press the MFB twice.
• To reject the incoming call, press and hold the MFB for 1-2 seconds.
iii. Rejecting a Call
To reject an incoming call when not on another call, press and hold the MFB for 1-2 seconds.
iv. Phone Voice Control
Press the MFB once while the headset is in standby mode to initiate voice command functions on your
phone. Support for this is phone dependent; see your phone’s user guide for more information.
VXi BlueParrott®B350-XT User Guide PAGE 16
ADVANCED FEATURES AND FUNCTIONS (continued)
v. Muting
The Parrott Button will act as a mute by default, unless configured for another function. The Volume Up
button will also function to control mute.
• A quick press of the Parrott Button while on a call will engage the mute. (Unless otherwise configured)
Press again to unmute.
• To use Volume Up to mute the headset microphone while on a call, press and hold the Volume Up
button for 1-2 seconds. To unmute, press and hold the button again for 1-2 seconds.
• While muted, a reminder tone will sound every 10 seconds.
vi. Transferring Audio
To transfer audio from the headset to the cell phone while on a call, press and hold the Volume Down
button for 1-2 seconds. The audio will transfer to the phone. Repeat to transfer audio back to the
headset. When audio is transferred to the phone, the light on the headset will be off until audio is
transferred back to the headset.
vii. Turning Headset Indicator Lights On/Off
A quick press of the Volume Up and Volume Down buttons together will turn the headset indicator lights
off. Repeat to turn the indicator lights on.
When powering on the headset, the indicator lights will be in the same state as they were when last
powered off.
VXi BlueParrott®B350-XT User Guide PAGE 17
ADVANCED FEATURES AND FUNCTIONS (continued)
Resetting Headset’s Paired Devices List
This will reset or clear the headset’s internal paired devices list. The headset must be on to perform this
function.
1. Power on the headset. It does not matter if it connects to any devices.
2. Hold the headset near your ear and press and hold the Volume Up and the Volume Down buttons
together for approximately 6-10 seconds until two low tones are heard.
3. Power off the headset. The pairing memory is now clear and will need to be paired to any desired
devices before it can be used with them.
VXi BlueParrott®B350-XT User Guide PAGE 18
FUNCTIONS & INDICATORS TABLES
Standby Mode Functions
Function
Power On
Power Off
Enable Pairing
Mode
Volume Up
Volume Down
Phone Voice
Control (Start/End)
Last Number
Redial
Disable LEDs
Button/Duration
of Press
MFB (1-2 seconds)
MFB (2-3 seconds)
MFB
(5-15 seconds)
Volume Up
(quick press)
Volume Down
(quick press)
MFB (quick press)
Volume Down
(1-2 seconds)
Volume Up/
Volume Down
(quick press)
LED Indicator
3 fast blue flashes
4 fast red flashes
Alternating red and
blue flash
NONE
NONE
NONE
NONE
NONE
Audio Indicator
NONE
NONE
NONE
1 short tone
1 short tone
1 tone
1 short tone
1 short tone
Voice Indicator
“Power on”
“Power off”
“Discovering”
NONE
NONE
NONE
NONE
NONE
VXi BlueParrott®B350-XT User Guide PAGE 19
FUNCTIONS & INDICATORS TABLES (continued)
Standby Mode Functions (continued)
Function
Enable LEDs
Reset Paired
Devices
Enable Multipoint
Mode
Disable Multipoint
Mode
Button/Duration
of Press
Volume Up/
Volume Down
(quick press)
Volume Up/
Volume Down
(5-6 seconds)
MFB/Volume Up &
Volume Down
(quick press)
MFB/Volume Up &
Volume Down
(3-4 seconds)
LED Indicator
LEDs active
NONE
NONE
NONE
Audio Indicator
1 short tone
2 low tones
4 rising tones
4 falling tones
Voice Indicator
NONE
NONE
NONE
NONE
VXi BlueParrott®B350-XT User Guide PAGE 20
FUNCTIONS & INDICATORS TABLES (continued)
Standby Mode Functions (continued)
Function
Establish Service
Level Connection
Start Proximity
Pairing
Proximity Pairing
Timeout
Button/Duration
of Press
MFB (Quick Press)
MFB & Volume
Down
(quick press)
NONE
LED Indicator
Fast blue flash
Alternating red and
blue flash
NONE
Audio Indicator
1 long tone
Long low tone
every 5 seconds
for 60 seconds
2 short tones (after
60 seconds)
Voice Indicator
“Your headset is
connected”
“Discovering”
NONE
VXi BlueParrott®B350-XT User Guide PAGE 21
FUNCTIONS & INDICATORS TABLES (continued)
In-Call Functions
Function
Volume Up
Volume Down
Mute (On/Off)
Mute (On/Off)
Mute Reminder
Answer a Call
End a Call
Button/Duration
of Press
Volume Up
(quick press)
Volume Down
(quick press)
Parrott Button,
unless otherwise
configured
(quick press)
Volume Up
(1-2 seconds)
NONE
MFB (quick press)
MFB (quick press)
LED Indicator
NONE
NONE
NONE
NONE
NONE
Blue light flashes
slightly slower
Blue light flashes
slightly faster
Audio Indicator
1 short tone
1 short tone
1 tone
1 tone
1 tone
(every 10 seconds)
2 rising tones
2 falling tones
Voice Indicator
NONE
NONE
NONE
NONE
NONE
NONE
NONE
VXi BlueParrott®B350-XT User Guide PAGE 22
FUNCTIONS & INDICATORS TABLES (continued)
In-Call Functions (continued)
Function
Reject a Call*
Transfer Audio
Incoming Call Hold
Accept Held
Incoming Call
Reject Held
Incoming Call
Button/Duration
of Press
MFB (1-2 seconds)
Volume Down
(1-2 seconds)
MFB
(2 quick presses)
MFB (quick press)
MFB (1-2 seconds)
LED Indicator
NONE
*Sends call to
voicemail (if available)
NONE (LEDs go out
until call ends, or
audio transferred
back to headset)
NONE
NONE
NONE
Audio Indicator
2 falling tones
1 long tone
NONE
NONE
2 falling tones
Voice Indicator
NONE
NONE
NONE
NONE
NONE
VXi BlueParrott®B350-XT User Guide PAGE 23
FUNCTIONS & INDICATORS TABLES (continued)
Notifications
Notification
Mute Reminder
Headset Connects
to device
Disconnect from
Device
Out of Range
(Link Loss)
Low Battery
Connect A2DP
Proximity Pairing
Timeout
Button/Duration
of Press
NONE
NONE
NONE
NONE
NONE
NONE
NONE
LED Indicator
NONE
Blue light,
fast flash
Red light,
slow flash
Red light,
slow flash
Red light,
2 fast flashes
Blue MFB (quick,
double-flash)
NONE
Audio Indicator
1 tone
(every 10 seconds)
NONE
NONE
1 short tone
NONE
NONE
2 short tones (after
60 seconds)
Voice Indicator
NONE
“Your headset is
connected”
“Your headset is
disconnected”
NONE
“Battery low”
every 60 seconds
“Your headset is
connected”
NONE
VXi BlueParrott®B350-XT User Guide PAGE 24
SPECIFICATIONS
Mechanical Specifications
Headset Weight
2.72 oz. (77 g)
Wearing Style
Over-the-head
Microphone Boom
Flexible gooseneck boom
Receiver Specifications
SPL
123 dB ± 3 dB at 1 mW
Impedance
32 Ω ± 15% @ 1 kHz
Frequency Response
20 Hz to 20 kHz
Microphone Specifications
Microphone
Bi-directional noise canceling
Frequency Response
100 Hz to 10 kHz
Ambient Noise Suppression
96%
Electrical Specifications
Battery Type
Li-ion rechargeable (not user-replaceable)
Talk Time
24+ hours
Standby Time
Up to 500 hours
Charging Time
3.5 hours
Bluetooth Specifications
Bluetooth Version
Bluetooth 4.0
Bluetooth Class
Class 2
Range
Up to 66 feet (20 meters)
Supported Profiles
HFP 1.6 (Wideband Speech)
HSP 1.2
A2DP
Agency Approvals
FCC, IC, CE, WEEE, C-Tick, TELEC
VXi Corporation | 271 Locust Street, Dover, NH 03820 USA
Toll Free: (800) 742-8588 | Phone: (603) 742-2888
vxicorp.com
APN 203477A © 2014 VXi Corporation
Loading...