VWR 82007-202, 82007-210, 700-0247, 700-0245, 700-0246 Instruction Manual

VWR Mini Blot Mixer

INSTRUCTION MANUAL

North American Catalog Number

US Cord(120V): 82007-202
US Cord(230V): 83007-210

European Catalogue Number(s):

Euro Plug: 700-0245
Swiss Plug: 700-0247
UK Plug: 700-0246

Version: 3
Issued: 06 / 20 / 2014

Lit M00074 VWR Mini Blot Mixer, Version 2, 04/01/2012

Legal Address of Manufacturer

United States Europe

VWR International VWR International bvba/sprl

1310 Goshen Parkway

West Chester, PA 19380 Geldenaaksebaan 464

800-932-5000 3001 Leuven

http://www.vwr.com + 32 16 385011

http://www.be.vwr.com

Researchpark Hassrode 2020

Country of origin

USA

Lit M00074 VWR Mini Blot Mixer, Version 2, 04/01/2012

Table of Contents

Safety information 4
Package Contents 4
Unpacking 4
Installation 5
Intended Use 5
Symbols and conventions 5
Specifications 6
Description of buttons and switches 6
Operation 7
Troubleshooting 7
General maintenance 7
User replaceable accessories and spare parts 8
Technical Service 8
Warranty 8
Disposal 9
Local VWR offices in Europe 10

Lit M00074 VWR Mini Blot Mixer, Version 2, 04/01/2012

Safety Information

Please follow the guidelines below, and read this manual in its entirety to ensure safe operation of the
unit.

• Hazardous samples should be mixed only in appropriate containment vessels.

• Do not mix flammable or explosive samples!

To avoid electrical shock:

• Do not use the mixer near water sources. Be sure that water doesn’t get on the device, especially
during the cleaning procedures!

Avoiding Damage to the Instrument

• Do not expose the mixer to aggressive vapors (e.g. organic solvents).

Package Contents

Description Quantity

VWR Mini Blot Mixer 1

Small Blot Box 1

Large Blot Box 1

Instruction Manual 1

Warranty Card 1

Unpacking

Before starting the installation, carefully examine the mixer.

• Open the box and carefully remove the padding. Check that the mixer has not been visibly damaged during

transportation. Keep the packing material until you are sure that the mixer works properly.

• Carefully lift the device out of the box.

• Be sure that the following information is included on the serial label located on the bottom of the unit: Serial Number,

Product number, Electrical rating.

• Check that the power cord plug has a pin configuration that matches a wall socket according to the local standard.

Should any kind of damage have occurred during transportation, contact the carrier immediately. The carrier is responsible

for shipping damage.

Lit M00074 VWR Mini Blot Mixer, Version 2, 04/01/2012

Installation

Place the mixer on a horizontal, level and stable surface. Connect the plug end of the cord to a grounded wall socket. Avoid

lines on which powerful electric motors, refrigerators and similar devices are connected. Use the on/off switch to control

power to the mixer.

Use caution when plugging into a grounded wall socket!
Do not touch plug with wet hands!
Do not unplug by pulling on the cord!

Intended use

The VWR Mini Blot Mixer combines the actions of a rocker and a shaker to produce a three dimensional

motion that is gentle enough for fragile gels and blots, yet provides thorough mixing. Designed for processing

blots and staining applications, the pitch and speed of the mixer are optimally set to allow for use of a minimal

amount of solution while preventing the membrane or gel from drying out.The flat rubber mat is ideal for

holding blotting boxes or trays.

For research use only. Not intended for any animal or human therapeutic or diagnostic use.

Symbols and conventions

The following chart is an illustrated glossary of the symbols that may be used in this
manual or on the product.

The electrical warning indicates the presence of a potential hazard which could result

in electrical shock.

CAUTION This symbol refers you to important operating and maintenance (servicing)

instructions within the product Instruction Manual. Failure to heed this information

may present a risk of damage or injury to persons or equipment.

This symbol identifies a Protective Earth (PE) terminal, which is provided for

connection of the supply system’s protective earth (green or green/yellow) conductor.

Lit M00074 VWR Mini Blot Mixer, Version 2, 04/01/2012

Product Specifications

Electrical requirements: 115V model 115V 10% - 50/60Hz, 0.03A

230V model 230V 10% - 50/60Hz, 0.015A

Speed: 115V/230V model 18 rpm / 20 rpm
Motion: 3-Dimensional rocking/rotating
Platform Tilt angle: 5°
Platform Dimensions: 20 x 16.5cm
Dimensions WxLxH: 20 x 16.5 x 17cm
Platform Load Ca pa city: 0.8kg
Platform Capacity 4 Small Blotting Boxes

2 Large Blotting Boxes

Weight: 0.85kg
Operating conditions: 4C to 65C, up to 85% RH, non-condensing

Description of Buttons and Switches

Main Power Switch

Lit M00074 VWR Mini Blot Mixer, Version 2, 04/01/2012

Operation

Blotting boxes or trays may be placed directly on the rubber mat. When placing boxes, it is important to arrange them

evenly to distribute the weight across the platform.

Always load the platform in a uniform and balanced fashion.

Use the On / Off switch to turn the unit on. The direction of rotation in which the unit starts is random and does not affect

mixing. If desired, the rotational direction can be reversed by holding the unit’s base and very briefly touching the rotating

platform on the bottom at one corner. This technique can also be used to select the quietest direction of rotation.

Troubleshooting

Review the information in the table below to troubleshoot operating problems.

Problem Cause Solution

Mixer does not
start.

Platform continually
changes rotation
direction

Power connection Check power connection

Platform blocked Check for obstructions blocking the motion of

the platform.

Motor Problem Contact VWR Technical service

Platform blocked Check for obstructions blocking the motion of

the platform.

Repair and maintenance of the VWR Mini Blot Mixer

No routine maintenance or lubrication is required.

Keeping the mixer clean will help to maintain it in proper working order

Cleaning

The outside housing can be cleaned with a soft, damp cloth when needed.

Do not use any aggressive or abrasive cleaners (acetone, nitro, polish etc.) This may permanently damage the mixer

finish.

Before cleaning the mixer, always unplug the power cord from the wall socket!

Lit M00074 VWR Mini Blot Mixer, Version 2, 04/01/2012

User replaceable accessories and spare parts

The small and large blot boxes are available separately

Description Part Number

Small Blot Box, Pack of 10 700-0248

Large Blot Box, Pack of 10 700-0249

Technical service

Web Resources

Visit the VWR’s website at www.vwr.com for:

• Complete technical service contact information

• Access to VWR’s Online Catalogue, and information about accessories and related products

• Additional product information and special offers

Contact us For information or technical assistance contact your local VWR representative or visit.

www.vwr.com.

Warranty

VWR International warrants that this product will be free from defects in material and workmanship for a

period of two (2) years from date of purchase. If a defect is present, VWR will, at its option, repair, replace, or

refund the purchase price of this product at no charge to you, provided it is returned during the warranty

period. This warranty does not apply if the product has been damaged by accident, abuse, misuse, or

misapplication, or from ordinary wear and tear.

For your protection, items being returned must be insured against possible damage or loss. This warranty

shall be limited to the replacement of defective products. IT IS EXPRESSLY AGREED THAT THIS

WARRANTY WILL BE IN LIEU OF ALL WARRANTIES OF FITNESS AND IN LIEU OF THE WARRANTY OF

MERCHANTABILITY.

Lit M00074 VWR Mini Blot Mixer, Version 2, 04/01/2012

Equipment disposal

This equipment is marked with the crossed out wheeled bin symbol to indicate that this equipment must not

be disposed of with unsorted waste.

Instead it's your responsibility to correctly dispose of your equipment at lifecycle -end by handling it over to an

authorized facility for separate collection and recycling. It's also your responsibility to decontaminate the

equipment in case of biological, chemical and/or radiological contamination, so as to protect from health

hazards the persons involved in the disposal and recycling of the equipment.

For more information about where you can drop off your waste of equipment, please contact your local dealer

from whom you originally purchased this equipment.

By doing so, you will help to conserve natural and environmental resources and you will ensure that your

equipment is recycled in a manner that protects human health.

Thank you

Lit M00074 VWR Mini Blot Mixer, Version 2, 04/01/2012

Austria

VWR International GmbH
Graumanngasse 7
1150 Vienna
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Belgium

VWR International bvba
Researchpark Haasrode 2020
Geldenaaksebaan 464
3001 Leuven
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Czech Republic

VWR International s. r. o.
Veetee Business Park
Pražská 442
CZ - 281 67 Stříbrná Skalice
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Denmark

VWR - Bie & Berntsen
Transformervej 8
2730 Herlev
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Finland

VWR International Oy
Valimotie 9
00380 Helsinki
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

France

VWR International S.A.S.
Le Périgares – Bâtiment B
201, rue Carnot
94126 Fontenay-sous-Bois cedex
Tel.: [phone]
Fax: [phone]
E-ma il: in fo@fr. vwr.co m

(0,15 € TTC/min)

(0,15 € TTC/min)

Germany

VWR International GmbH
Hilpertstraße 20a
D - 64295 Darmstadt
Freecall: 0800 702 00 07
Fax: [phone]*
Email: [e-mail]

*0,14 €/Min. aus d. dt. Festnetz

Hungary

VWR International Kft.
Simon László u. 4.
4034 Debrecen
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Ireland / Northern Ireland

VWR International Ltd /
VWR International (Northern Ireland) Ltd
Orion Business Campus
Northwest Business Park
Ballycoolin
Dublin 15
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Italy

VWR International PBI S.r.l.
Via San Giusto 85
20153 Milano (MI)
Tel.: [phone]-487791
Fax: [phone]
E-mail: [e-mail]

The Netherlands

VWR International B.V.
Postbus 8198
1005 AD Amsterdam
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Norway

VWR International AS
Haavard Martinsens vei 30
0978 Oslo
Tel.: 02290
Fax: [phone]
E-mail: [e-mail]

Poland

VWR International Sp. z o.o.
Limbowa 5
80-175 Gdansk
Tel.: [phone] do 204
Fax. [phone]
E-mail: [e-mail]

Portugal

VWR International -
Material de Laboratório, Lda
Edifício Neopark
Av. Tomás Ribeiro, 43- 3 D
2790-221 Carnaxide
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Spain

VWR International Eurolab S.L.
C/ Tecnología 5-17
A-7 Llinars Park
08450 - Llinars del Vallès
Barcelona
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Sweden

VWR International AB
Fagerstagatan 18a
163 94 Stockholm
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Switzerland

VWR International GmbH
Lerzenstrasse 16/18
8953 Dietikon
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Turkey

Pro Lab Laboratuar Teknolojileri Ltd.Şti.
a VWR International Company
Orta Mah. Cemal Gürsel Caddesi
Ördekcioglu Işmerkezi No.32/1
34896 Pendik - Istanbul
Tel.: [phone]
Fax: [phone]
Email: [e-mail]

UK

VWR International Ltd
Customer Service Centre
Hunter Boulevard - Magna Park
Lutterworth
Leicestershire
LE17 4XN
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Australia

VWR International, Pty Ltd.
Unit 1/31 Archimedes Place
Murarrie, Queensland 4172
Tel.: [phone]
Fax: [phone]

China

VWR International China Co., Ltd
Rm.219, 2100 Dongming Road
Pudong New District
Shanghai 200123
Tel.:[phone]
Fax:[phone]
E-mail: [e-mail]

India

VWR Lab Products Private Limited
135/12, Brigade Towers, 2nd Floor
Front wing, Brigade Road,
Bengaluru, India – 560 025
Tel.: [phone] (Bengaluru)
Tel.: [phone] (Mumbai)
Fax: [phone]
E-mail: [e-mail]

New Zealand

Global Science - A VWR Company
241 Bush Road
Albany 0632, Auckland
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

Singapore

VWR Singapore Pte Ltd
18 Gul Drive
Singapore 629468
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]

