VUPplus FOLDABLE CYCLING BACKPACK User Manual
NB-8233
Cy
cling Backpack with LED Signal Light
User Manual
www
.vupplus.com
FOLD
ABLE CYCLING BACKPACK
www
.vupplus.com info@miracase.com
Miracle Intelligent Technology Co., Ltd.
4/F,Bldg 1,Launch Industrial Park, Wuhe Avenue,
Bantian Shenzhen,518129 China
Mad
e in China
Preface: Thank you for using cycling backpack with led
warning signal light and sensor. In order to use and
maintain this product correctly, please fully read the user
manual before using. This product is specially designed for
the safety of people who often cycle at night. The warning
led signal light, realized by means of the operation of
remote controller, will indicate your next intention and alert
others behind/around you to achieve the goal of safety.
Special Instructions:
1. The led signal lights are just for the purpose of alerting
people behind/around you, can not be treated as traffic
signal lights.
2. This product also applies to other outdoor exercises such
as Hiking, Jogging, etc.
3. For any statements below, all rights are reserved by
VUP
+
What this package contains:
1 One backpack
2 One LED displayer
3 One remote controller with plastic mount
4 One micro-USB cable
5 One cable with micro-USB connector on both ends
6 One user manual
Parts Illustration
1
3
4
7
8
5
6
On/off button
1
9
2
LED signal light
2
3
Cycling signal
4
Right-turning signal
5
Left-turning signal
6
Caution signal
7
RC(remote controller) button
8
Plastic RC mount
9
Backpack
01
02
Transmitter
Battery: 250mAh rechargeable Lithium battery (directly
plug into USB power adapter to charge)
Working time: 20 hours
Shell material: PC+ABS+ Silicon
Specification
Wireless frequency: 2.4GHz
Transmission distance: 3-5meters (depending on the actual
surroundings)
Receiver
Battery: 3.7V, 1150mAh rechargeable Lithium battery
(directly plug into USB power adapter to charge)
Working time: continuously 8 hours
Charging: DC 5V 500MA
Backpack:
Material: Nylon
Product Size: 17” x 12” x 4.6”
Weight: 365g
Certificates
FCC, IC, CE, ROHS
User Instructions:
Receiver：
Power on: press the switch(Part ), four different LED
signal lights will be on one by one as below, and then into
stand-by mode. It won’t be activated until remote
controller is on.
Power off: press the button(Part ) while they’re working
normally, LED signal lights will go off immediately.
Power on: push the button(Part ) to the backward, three
different (forward/left/right) LED signal lights will be on in
about 5 seconds, lose it, and it’s okay to use. Meanwhile,
LED displayer’s power-on signal lights will be on once
again.
Transmitter:
1
1
7
03 04
Loading...