Vu Phong S400VA, S1500VA, S1000VA User Manual

Pure Sine Wave Inverter

S400VA / S1000VA / S1500VA

www.vuphong.vn|www.vuphong.asia

User Manual

1. Introduction

The Vu Phong Sine Wave series models are used in a wide range
of applications. It will operate most televisions, fans, lamps,
personal computers, small appliances and tools.

The inverter must have a greater power rating than the
load it provides power to.

To get the most out of the power inverter, it must be installed
and used properly.

Please read the instructions in this manual before installing and
using this model.

S400VA / S1000VA / S1500VA

www.vuphong.vn|www.vuphong.asia

2. Specifications

S400VA

S1000VA

S1500 VA

Input Voltage

12V DC

Output Voltage

230V AC +/- 5%; 50Hz

Rated Output
Power

320W

800W

1200W

Max. Output
Power

400VA

1000VA

1500VA

Peak Surge
Power (5s)

600VA

2000VA

3000VA

Power factor

0.8

Max Efficiency

90%

Protections

Battery Deep Discharge (Low Voltage

Disconnect / Reconnect); AC Short Circuit; Over

Load; Reverse DC Polarity

No Load Power
Consumption

< 2W (in

Green Power

status)

< 6W

< 4W (in

Green Power

status)

Cooling
Method

Natural convection, heat dissipation via

aluminium casing and heat sink; fan

Available
Versions

Inverter

Inverter; UPS

w/ AC Battery

Recharging

Function

Inverter

Transfer time

----

12ms

----

Size

200x125x115

mm; 2.0kg

340x135x134

mm; 3.8 kg

365x195x155

mm; 6.4 kg

Accessories

DC cables w/ cable shoe for battery connection

S400VA / S1000VA / S1500VA

www.vuphong.vn|www.vuphong.asia

3. Name and Main Function

3.1. Back side

a) ON / OFF switch: Power ON/OFF switch, leave in the OFF

position during installation.

b) Ventilation port(s): Allow air flow. Do not obstruct.
c) Battery Cables w/ Cable shoe: Connect to 12V battery.

Red is positive; Black / Blue is negative.

3.2. Front side

a) AC outlets: Connect to 220V loads
b) Green Power switch (S400VA / S1500VA): Energy saving

enable. Turn the switch ON to reduce the consumption
of the battery when AC output is without load.

c) LED indicators:

 S400VA

- Fault: over temperature / over load (red)

- Normal (green): normal operation (green)

 S1000VA

- Fault: over temperature; over load (red)

- Normal: normal operation (green)