Item # __________________________
VIR-36F SERIES
C.S.I. Section 11420
HEAVY DUTY GAS INFRARED BROILER
WITH FINISHING OVEN
■■ VIR-36F Top fired infrared gas broiler with standard oven
STANDARD FEATURES
■ Stainless steel front and front top ledge. Sides and top finished
in black epoxy powder coat paint. 6" adjustable legs.
1
/4" diameter front gas manifold.
■ 1
■ Four 20,000 BTU/hr. heavy duty infrared burners, 80,000
BTU/hr. total input.
■ Pilot ignition system.
■ Two infinite heat control valves.
■ Floating grid rack assembly with positive positioning control
handle. Two section cooking grid measures 25
■ Full width floating drip pan drains into a large capacity grease
collector.
■ Finishing oven above broiler with manual heat control
measuring 28"w x 20"d x 13"h.
■ Standard oven with 40,000 BTU/hr. burner with pilot ignition.
Porcelain enamel on steel oven hearth, rear panel and door
liner. One oven rack with four positions. Thermostat adjusts
from 250° to 500°F. Oven controls located in the cool zone.
Counterbalanced oven door. Oven interior measures 27
x 281/2"d x 141/2"h.
■ One year limited parts and labor warranty.
1
/2" x 251/2".
1
/2"w
Vulcan-Hart Co.
ISO9001
A2780
MODELS: VIR-36F SERIES
SPECIFICATIONS:
Heavy duty top fired gas broiler, Vulcan-Hart Model VIR-36F.
Stainless steel front and front top ledge. Sides and top finished in
black epoxy powder coat paint. 6" adjustable legs. 1
1
/4" diameter
front gas manifold. Four 20,000 BTU/hr. heavy duty infrared
burners, 80,000 BTU/hr. total input. Pilot ignition system. Two
infinite heat control valves. Floating grid rack assembly with
positive positioning control handle. Two section cooking grid
measures 25
1
/2" x 251/2". Full width floating drip pan drains into
a large capacity grease collector. Finishing oven above broiler
with manual heat control measuring 28"w x 20"d x 13"h.
Exterior dimensions: 36"w x 38
1
/4"d x 781/2"h on 6" adjustable legs.
CSA design certified. NSF listed.
SPECIFY TYPE OF GAS AND FINISH WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.
OPTIONS
■■ Stainless steel side(s). ■■ Left ■■ Right
■■ Stainless steel finishing back.
■■ Electronic ignition (oven bases only).
■■ Common stainless steel front top ledge up to 96" wide.
(Drawing required showing the position of each piece of
equipment.)
■■ Cap and cover manifold end(s). ■■ Left ■■ Right
■■ Leveling bolts in place of legs for curb mounting.
■■ Stainless steel dolly frame with casters, up to 72" wide.
1
/4" rear gas connection (includes gas pressure regulator).
■■ 1
ACCESSORIES
■■ Set of four 5" diameter casters, two locking.
1
/4" gas pressure regulator.
■■ 1
■■ Flexible gas hose with quick disconnect and restraining
device. Consult price book for available sizes.
Heavy Duty Gas Infrared Broiler w/Finishing Oven
F-32525 (6-04)
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
IMPORTANT
1. A properly sized gas pressure regulator suitable for battery or
single unit application must be furnished and installed.
Natural gas 5.0" W.C., propane gas 10.0" W.C.
2. An adequate ventilation system is required for commercial
cooking equipment. Information may be obtained by writing to
the National Fire Protection Association, Batterymarch Park,
Quincy, MA 02269. When writing refer to NFPA No. 96.
3. These units are manufactured for installation in accordance
with ANSZ223.1a (latest edition), National Fuel Gas Code.
Copies may be obtained from the American Gas Association,
1515 Wilson Blvd., Arlington, VA 22209.
VIR-36F SERIES
HEAVY DUTY GAS INFRARED BROILER
WITH FINISHING OVEN
4. Clearances: Combustible Non-Combustible
Rear 2" 0"
Sides 20" 2"
5. For proper combustion, install equipment on adjustable legs
or casters. On curb or platform, allow 3
Leveling bolts are required for curb installation. Specify when
ordering.
6. Cannot be batteried with GH series equipment.
7. This appliance is manufactured for commercial installation
only and is not intended for home use.
1
/2" front overhang.
GAS RATED INPUT BTU/HR.
MODEL
APPROX.
SHP. WT.
NO. BROILER BASE TOTAL WIDTH DEPTH HEIGHT (lbs./kg)
VIR-36F 80,000 40,000 120,000 36" 381/4"78
1
/2" 875/394
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-32525 (6-04)
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
Printed On Recycled Paper