Vulcan-Hart V-24S SERIES, V4-24S, V1G-24S Specifications

Item # __________________________

C.S.I. Section 11420

V-24S SERIES

24" WIDE HEAVY DUTY GAS RANGE WITH OPEN
CABINET BASE

■■ V4-24S Four open burners

■■ V1G-24S Griddle top

STANDARD FEATURES

■ Stainless steel front, front top ledge and 6" stub back.

■ Stainless steel 6" adjustable legs.

■ Sides finished in black epoxy powder coat paint.

1

/4" diameter front gas manifold.

■ 1

■ One year limited parts and labor warranty.

Vulcan-Hart Co.

ISO9001

A2780

Shown with optional stainless steel cabinet door

SPECIFICATIONS:

24" wide heavy duty cabinet base gas range, Vulcan-Hart Model
No. ________. Stainless steel front, front top ledge and 6" high
stub back. Sides finished in black epoxy powder coat paint. 11/4"
diameter front gas manifold.

■ V4-24S: Four 30,000 BTU/hr. two piece open burners. Indi­vidual pilot for each burner. Heavy duty cast iron top grates
measures 12"w x 27"d each.

■ V1G-24S: Highly polished steel griddle plate is 24"w x 24"d x
1" thick. Stainless steel side splashes, front grease trough and
large capacity grease collector. Two 30,000 BTU/hr. burners
with pilot ignition and manual control valves.

Exterior dimensions:
24"w x 38"d x 36" working height on 6" adjustable legs.

CSA design certified. NSF listed.

SPECIFY TYPE OF GAS AND FINISH WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.

OPTIONS

■■ Elevated (step-up) rear burner (open burner only).

■■ Stainless steel side(s). ■■ Left ■■ Right

■■ Stainless steel cabinet door.

■■ Stainless steel finishing back.

■■ Stainless steel intermediate shelf.

■■ Stainless steel bottom.

■■ Thermostatically controlled griddle (G models only).

■■ Cap and cover manifold end(s). ■■ Left ■■ Right

3

■■ Rear gas connection. ■■

/4" (includes gas pressure regu-

lator) or ■■ 11/4"

■■ Common stainless steel front top ledge up to 96" wide.

(Drawing required showing the position of each piece of
equipment.)

■■ Leveling bolts in place of legs for curb installation.

■■ Stainless steel dolly frame with casters, up to 72" wide.

ACCESSORIES

■■ Set of four 5" diameter casters, two locking.

1

/2" or 373/4" high stainless steel backguard. (Available up to

■■ 26

72" wide.)

1

/2" high single deck high shelf. (Available up to 72" wide.)

■■ 26

1

/2" high single deck flo-thru shelf. (Available up to 72" wide.)

■■ 26

■■ 373/4" high double deck high shelf. (Available up to 72" wide.)

1

/4" gas pressure regulator.

■■ 1

■■ Flexible gas hose with quick disconnect and restraining

device. Consult price book for available sizes.

MODELS: V-24S SERIES

24" Wide Heavy Duty Cabinet Base Gas Range

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

F-32496 (10-03)

502-778-2791 QUOTE & ORDER FAX: [phone]

IMPORTANT

1. A properly sized gas pressure regulator suitable for battery or

single unit application must be furnished and installed.
Natural gas 5.0" W.C., propane gas 10.0" W.C.

2. An adequate ventilation system is required for commercial

cooking equipment. Information may be obtained by writing to
the National Fire Protection Association, Batterymarch Park,
Quincy, MA 02269. When writing refer to NFPA No. 96.

3. These units are manufactured for installation in accordance

with ANSZ223.1a (latest edition), National Fuel Gas Code.
Copies may be obtained from the American Gas Association,
1515 Wilson Blvd., Arlington, VA 22209.

V-24S SERIES

24" WIDE HEAVY DUTY GAS RANGE WITH OPEN
CABINET BASE

4. Clearances: Combustible Non-Combustible
Rear 2" 0"
Sides 20" 2"

5. For proper combustion, install equipment on adjustable legs
or casters. On curb or platform, allow 3
Leveling bolts are required for curb installation. Specify when
ordering.

6. Cannot be batteried with GH series equipment.

7. This appliance is manufactured for commercial installation
only and is not intended for home use.

1

/2" front overhang.

MODEL BTU/HR. HEIGHT SHP. WT.

NO. INPUT WIDTH DEPTH ON 6" LEGS (lbs./kg)

V4-24S 120,000

V1G-24S 60,000 360/162

NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.

F-32496 (10-03)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

WORKING APPROX.

24" 38" 36"

295/133

Printed On Recycled Paper