Vulcan Hart V1FT36 General Manual

Item # __________________ C.S.I. Section 11420
VULC A N V SERI E S HEAVY DUTY RANGES
HEAVY DUTY GAS RANGE
RADIAL FIN FRENCH TOP / 36" WIDE GAS RANGE
V1FT36 T Radial Fin French Top / Modular V1FT36B T Radial Fin French Top / Cabinet Base V1FT36S T Radial Fin French Top / Standard Oven V1FT36C T Radial Fin French Top / Convection Oven
STANDARD FEATURES
Stainless steel front, front top ledge, burner box, sides,
base, exterior bottom and stub back
1
1-
⁄4" diameter front gas manifold with 1-1⁄4" rear
gas connection (capped)
45,000 BTU/hr. burners (3 ring burner)
50,000 BTU/hr. standard oven burner
32,000 BTU/hr. convection oven burner
Porcelain oven cavity
Individual pilots and controls for each burner
Polished cast iron French Top
4" stainless steel stub riser
6" adjustable stainless steel legs for “S”, “C”, & “B” models
(no legs for modular model)
Stainless steel cabinet base doors
One year limited parts and labor warranty
Model V1FT36S shown on a standard oven base
SPECIFICATIONS
36" wide heavy duty gas range, Vulcan model No. V1FT36 (modular), V1FT36B (cabinet base), V1FT36S (standard oven base) or V1FT36C (convection oven base). Modular construction for ease of installation. Stainless steel front, plate ledge, front top ledge with pull-out condiment rails, sides, base, exterior bot­tom, stub back and 6" adjustable legs on all “B”, “S”, & “C” models. Stainless steel extra deep crumb tray. Three cast ring burners totaling 45,000 BTU/hr. Individual pilots and controls for each burner. Heavy polished cast iron French plate. Standard oven: 50,000 BTU/hr. with porcelain oven bottom, sides, and interior door panel. Convection Oven: 32,000 BTU/hr. with porcelain oven bottom, sides, and interior door panel (115v-1 phase blower motor, 4 amps, 6' cord & plug). Ovens measure 27"w x 27"d x 13"h. Standard oven thermostats adjust from 150°-550°F. Convection
oven adjusts from 175°-550°F and the optional nishing oven for
standard ovens adjusts from 300°-650°F. Standard oven supplied with one rack, convection oven with two. Both ovens allow for three rack positions. Oven door is heavy duty with counter weight door hinges. 1-
1
⁄4" diameter front manifold and 1 1⁄4" rear gas
connection, capped. Total input 45,000 BTU/hr.
Exterior Dimensions:
3
36
⁄4"d x 36"w x 36"h on 6" adjustable legs
OPTIONAL FEATURES (Factory Installed)
1- T1⁄4" rear gas connection Cap and cover front manifold T Stainless steel oven cavity T 650°F oven thermostat and steel hearth. T (“S” models)
Fan cooling package T (“C” models)
4" adjustable anged feet for modular models T 6" adjustable anged feet for “S”, “C”, & “B” models T
Less legs for dolly mounting of “S”, “C”, & “B” models T Set of 4 casters, 6" high T (two locking) 3" high toe base for curb mounting T
3
T
", 1", or 1 1⁄4" gas pressure regulator
4
(specify gas type – pack loose)
Common condiment type, telescoping plate rails T
ACCESSORIES (Packaged & Sold Separately)
Extra removable shelves for use with Universal T
rack guides (cabinet base)
Banking strip T Common condiment type, telescoping plate rails T
(starting at 24" length)
10", 22", or 34" high back risers T (no shelf)
22" single deck solid or o-thru high shelf risers T 34" double deck solid or o-thru high shelf risers T
Dolly frames T Flexible gas hose with quick disconnect & restraining device T
P.O. Box 696
F37442 (1/10)
Vulcan & Wolf Range
a division of ITW Food Equipment Group LLC
n
Louisville, KY 40201 n Toll-free: 1-800-814-2028 n Local: 502-778-2791 n Quote & Order Fax: 1-800-444-0602
VULC A N V SERI E S HEAVY DUTY RANGES
HEAVY DUTY GAS RANGE
RADIAL FIN FRENCH TOP / 36" WIDE GAS RANGE
INSTALLATION INSTRUCTIONS
A properly sized gas pressure regulator suitable for battery 1. or single unit application must be furnished and installed. Natural gas 6.0" W.C., propane gas 10 W.C.
An adequate ventilation system is required for commercial 2. cooking equipment. Information may be obtained by writing to the National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02269, www.NFPA.org. When writing, refer to NFPA No. 96.
These units are manufactured for installation in 3. accordance with ANSZ223.1A (latest edition), National Fuel Gas Code. Copies may be obtained from The American Gas Association, 400 N Capitol St. NW, Washington, DC 20001, www.AGA.org.
Clearances4. Rear Sides Combustible 10" 10" Non-combustible 0" 0"
For proper combustion, install equipment on adjustable 5. legs or casters. On curb or platform, allow 3­ overhand. Toe base with leveling bolts are required for curb installation. Specify when ordering.
Cannot be batteried with GH series equipment.6.
This appliance is manufactured for commercial 7. installation only and is not intended for home use.
NOTE: In line with its policy to continually improve its product, Vulcan reserves the right to change materials
and specications without notice.
Specify type of gas when ordering. Specify altitude when above 2,000 feet.
1
⁄2" front
CONFIGURATION
P.O. Box 696
F37442 (1/10)
TOP
MODEL
NUMBER
V1FT36 Radial Fin French Top / Modular 45,000 404 / 183
V1FT36B Radial Fin French Top / Cabinet Base 45,000 504 / 229
V1FT36S Radial Fin French Top / Standard Oven Base 95,000 685 / 311
V1FT36C Radial Fin French Top / Convection Oven Base 77,000 763 / 346
DESCRIPTION
TOTAL INPUT
BTU / HR
SHIPPING WEIGHT
Vulcan & Wolf Range
a division of ITW Food Equipment Group LLC
n
Louisville, KY 40201 n Toll-free: 1-800-814-2028 n Local: 502-778-2791 n Quote & Order Fax: 1-800-444-0602
LBS / KG
Loading...