Vulcan Hart STAND_PXSTCK General Manual

Item # __________________________

C.S.I. Section 11420

STANDS

STACK STAND FOR VPX3 AND VPX5 STEAMERS

ACCESSORY CODES

■■ STAND_PXSTCK 24" wide

STANDARD FEATURES

■ Stainless steel frame, flanged feet on front and rear.

■ Complete with mounting hardware for Vulcan VPX steamers.

■ One year limited parts and labor warranty.

Vulcan-Hart Co.

ISO9001

A2780

SPECIFICATIONS:
VPX counter steamer equipment stand. Stainless steel frame,
flanged feet on front and rear. Complete with mounting hardware
for Vulcan VPX steamers.

Exterior dimensions: 24

1

/2"w x 25"d.

STANDS

Stack Stand For VPX3 and VPX5 Steamers

F-32568 (04-02)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

STANDS

STACK STAND FOR VPX3 AND VPX5 STEAMERS

NOTE:

• Dimensions which locate the above connections have a tolerance of +
or -3" (+ or -77 mm).

• Installation of backflow preventers, vacuum breakers and other specific
code requirements is the responsibility of the owner and installer. It is
the responsibility of the owner and installer to comply with local codes.

• Plastic drains are not recommended due to inherent limited tempera­tures of the plastic. Boiler purge temperatures may exceed 180°F. The
installer may be required to provide means to reduce boiler purge water
temperatures to be that of the condensate temperture of 140°F or
below.

• This appliance is manufactured for commercial installation only and
is not intended for home use.

• See VPX Series spec sheet for electrical connections.

V VPX vent extension.

EQUIPMENT CLEARANCE: Rear: 6" Sides 0"

NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and

specifications without notice.

F-32568 (04-02)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

Printed On Recycled Paper