Vulcan-Hart ScaleBlocker SPS600V, ScaleBlocker SPS620V Specifications
Item # __________________________
C.S.I. Section 11420
ScaleBlocker
™
WATER FILTER SYSTEM
■■ SPS600V
■■ SPS620V
STANDARD FEATURES
■ Single cartridge design.
■ Patented technology reduces limescale with-out chemicals
or additives.
■ Reduces the need for deliming.
■ Mounting bracket with clear filter housing and red cap.
■ Shut off valve and pressure gauge.
■ Incoming water parameter:
pH 6-9
Alkalinity ppm 80 - 100
Chlorine ppm 0 - 4
Hardness ppm 0 - 300
3
■
⁄4 NPTF inlet and outlet.
■ Shut off valve with cold water
for unfiltered connection.
■ Water pressure gauge.
■ Water flow meter with reminder setting.
1
/4" compression connection
Vulcan-Hart Co.
ISO9001
A2780
MODELS: SCALEBLOCKER
SPECIFICATIONS:
Water filter system, Vulcan-Hart Model No. SPS___V. Single
cartridge design. Patented technology reduces limescale without chemicals or additives. Reduces the need for deliming.
Mounting bracket with clear filter housing and red cap. Shutoff
valve and gauge. Incoming water parameters are pH 6 - 9,
Alkalinity ppm 80 - 100, Chlorine ppm 0 - 4, Hardness ppm
0 - 300.
Exterior dimensions:
SPS600V: 14"w x 10"d x 18
SPS620V: 14"w x 10"d x 28"h.
NSF tested and certified.
3
⁄4 NPTF inlet and outlet.
1
/2"h.
™
Water Filter System
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
F-32428 (6-04)
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
SPS600V
ScaleBlocker™
WATER FILTER SYSTEM
NOTES:
1. Dimensions which locate the below connections have a
tolerance of + or - 3" (+ or - 77mm).
SPS600V
Service Flow 0-2 GPM
Service Life 7,500 Gal
Inlet / Outlet 3/4" NPT F
Inlet Min / Max Pressure 40-125 PSIG
Min / Max Temperature 45-100F (7-37C)
Weight, Operating 21 Lbs. (9.5 kg)
SPS620V
Service Flow 0-4 GPM
Service Life 12,000 Gal
Inlet / Outlet 3/4" NPT F
Inlet Min / Max Pressure 40-125 PSIG
Min / Max Temperature 45-100F (7-37C)
Weight, Operating 32 Lbs. (15.5 kg)
2. Installation of backflow preventers, vacuum breakers, other
code requirements and local code compliance is the responsibility of the owner and installer.
3. Filter clearance needed for access:
Front 13"
Bottom 4"
4. Plastic drains are not recommended due to inherent limited
temperatures of the plastic. Boiler purge temperatures
may exceed 180°F. The installer may be required to provide
means to reduce boiler purge water temperatures to be that
of condensate temperature of 140°F or below.
5. This appliance is manufactured for commercial installation
only and not intended for home use.
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-32428 (6-04)
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
SPS620V
WATER QUALITY STATEMENT:
Water from ScaleBlocker™ System should only be connected
to the boiler / generator feed and not the condenser connection
of the steamer. Systems are not to be used where water is
microbiologically unsafe or with water of unknown quality without
adequate disinfections before and after use. Connecting to a
municipal water supply complies with this requirement.
Printed On Recycled Paper
Loading...