Vulcan Hart SB1011 Bulletin Manual

ATTENTION: SERVICE MANAGER - PARTS MANAGER

SERVICE BULLETIN – SB1011

DATE:

TO:

FROM:

SUBJECT:

14 July 2011
VULCAN AND WOLF CONTRACTED PARTS AND SERVICE AGENCYS

HOBART BRANCHES AND AGENCYS

Ronald Arrington

Preventive Maintenance – Convection Ovens

Model Numbers Affected

All VC and SG series convection ovens.

Problem:

The air intake perforations located in the lower left corner of the back panel assembly
may become clogged with grease or debris. This restricts both cooling and combustion
air causing possible component failure and intermittent ignition failures.

Tools

Not required.

Action

As a quarterly maintenance procedure and after each service, use a damp rag and
clean blockage from air intake.

AIR INTAKE
PERFORATIONS
MUST BE FREE OF
ANY GREASES OR
DEBRIS. KEEP IT
CLEAN AT ALL THE
TIMES.

If you have any questions contact Ray Boyle at Vulcan Technical Service.

800-814-2028 select 1224

EG COOKING/FULL KITCHEN EQUIPMENT / JULY 2008

Service Information